Download or read book Fabrication and Design of Sub wavelength Periodic Textures for Improving Light Harvesting in Multi junction III V Photovoltaics written by Wei Wang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of non-planar antireflective coating and back- (or front-) surface texturing are widely studied to further reduce the reflection losses and increase the sunlight absorption path in solar cells. In III-V concentrator applications sunlight is focused onto the surface of cell and consequently, light arrives with a wide angular distribution that limits the effectiveness of conventional thin-film antireflective coatings (ARCs). Furthermore, the transmission properties are generally degraded non-uniformly over the electromagnetic spectrum, which in the case of multi-junction solar cells, leads to additional sub-cell current matching-related losses. Here, and in an attempt to identify a better alternative to the conventional dual-layer ARCs, a systematic analysis is undertaken regarding the design of parameters and angular dependent antireflective properties of dielectric grating formed through the implementation of sub-wavelength arrays of 2D pyramidal and hemispherical textures. The study includes evaluation of these properties for several common dielectrics through a careful selection of dielectric material and design. These structures can significantly surpass the performance of planar dual-layer ARCs, and the total number of reflected photons over 380-2000 nm wavelength range can be reduced to less than 2%, by use of single-material textured dielectric. It is also shown that the implementation of these structures for a typical concentrated 3 or 4 junction solar cells with apertures ranging from 0-60 degrees reduces total losses of reflected photons for each sub-cell to less than 4%, and therefore reduces current degradation. Back reflectors have been developed from perfect mirror to textured mirror in order to further increase light path, which can significantly improve the efficiency and allow for much-thinner devices. A Lambertian surface, which has the most random texture, can theoretically raise the light path to 4n2 times that of a smooth surface. It’s a challenge however to fabricate ideal Lambertian texture, especially in a fast and low cost way. In this work, a method is developed to overcome this challenge that combines the use of laser interference lithography and selective wet etching. The approach allows for a rapid wafer scale texture processing with subwavelength (nano-) scale control of the pattern and the pitch. The technique appears as being particularly attractive for the development of ultra-thin III-V devices, or in overcoming the weak sub-bandgap absorption in devices incorporating quantum dots or quantum wells (QWs). The design and fabrication process on the application of the technique for the development of back reflectors for MQWs solar cells are presented. Depending on the growth order (inverted or up-right growth), the two-side device-metallization incorporated with lift-off process are designed differently due to the fragile ultra-thin (~ 2 μm) active layer, and the strain from embedded QWs. Another approach is done through thinning the substrate (~ 15-20 μm), texturing the substrate as an incoherent reflector, and metallization, which won’t affect active layers.
Download or read book Optimizing Design of 2D Sub wavelength Gratings for Antireflection Coating of Multi junction III V Concentrator Cells written by Wei Wang and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In III-V concentrator applications sunlight is focused onto the surface of cell and consequently light arrives with a wide angular distribution that limits the effectiveness of conventional thin-film antireflective coatings (ARC). Furthermore, the transmission properties are generally degraded non-uniformly over the electromagnetic spectrum, which in the case of multi-junction solar cells, leads to additional subcell current matching-related losses. Here, and in an attempt to identify a better alternative to the conventional dual layer ARCs, we have undertaken a systematic analysis of design parameters and angular dependent antireflective properties of dielectric grating formed through the implementation of sub-wavelength arrays of 2D pyramidal and hemispherical textures. The study includes evaluation of these properties for several common dielectrics i.e. SiO2, Si3N4, SiC, TiO2, and ZnS, through a careful selection of dielectric material and design. These structures can significantly surpass the performance of planar double-layer ARCs (i.e. MgF2/ZnS), and the total number of reflected photons over 380-2000 nm wavelength range can be reduced to less than 2%, by use of single material textured dielectric. It is also shown that the implementation of these structures for a typical concentrated 3 or 4 junction solar cell with acceptance angles ranging from 0-60 degrees, reduces total losses of reflected photons for each subcell to less than 4%, hence reduces current degradation.
Download or read book Photon Management in Solar Cells written by Ralf B. Wehrspohn and published by John Wiley & Sons. This book was released on 2015-06-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by renowned experts in the field of photon management in solar cells, this one-stop reference gives an introduction to the physics of light management in solar cells, and discusses the different concepts and methods of applying photon management. The authors cover the physics, principles, concepts, technologies, and methods used, explaining how to increase the efficiency of solar cells by splitting or modifying the solar spectrum before they absorb the sunlight. In so doing, they present novel concepts and materials allowing for the cheaper, more flexible manufacture of solar cells and systems. For educational purposes, the authors have split the reasons for photon management into spatial and spectral light management. Bridging the gap between the photonics and the photovoltaics communities, this is an invaluable reference for materials scientists, physicists in industry, experimental physicists, lecturers in physics, Ph.D. students in physics and material sciences, engineers in power technology, applied and surface physicists.
Download or read book Perovskite Photovoltaics written by Aparna Thankappan and published by Academic Press. This book was released on 2018-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation examines the emergence of perovskite photovoltaics, associated challenges and opportunities, and how to achieve broader development. Consolidating developments in perovskite photovoltaics, including recent progress solar cells, this text also highlights advances and the research necessary for sustaining energy. Addressing different photovoltaics fields with tailored content for what makes perovskite solar cells suitable, and including commercialization examples of large-scale perovskite solar technology. The book also contains a detailed analysis of the implementation and economic viability of perovskite solar cells, highlighting what photovoltaic devices need to be generated by low cost, non-toxic, earth abundant materials using environmentally scalable processes. This book is a valuable resource engineers, scientists and researchers, and all those who wish to broaden their knowledge on flexible perovskite solar cells. - Includes contributions by leading solar cell academics, industrialists, researchers and institutions across the globe - Addresses different photovoltaics fields with tailored content for what makes perovskite solar cells different - Provides commercialization examples of large-scale perovskite solar technology, giving users detailed analysis on the implementation, technical challenges and economic viability of perovskite solar cells
Download or read book Photovoltaic Fundamentals written by Gary Cook and published by . This book was released on 1991 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Antennas written by Mario Agio and published by Cambridge University Press. This book was released on 2013-01-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This consistent and systematic review of recent advances in optical antenna theory and practice brings together leading experts in the fields of electrical engineering, nano-optics and nano-photonics, physical chemistry and nanofabrication. Fundamental concepts and functionalities relevant to optical antennas are explained, together with key principles for optical antenna modelling, design and characterisation. Recognising the tremendous potential of this technology, practical applications are also outlined. Presenting a clear translation of the concepts of radio antenna design, near-field optics and field-enhanced spectroscopy into optical antennas, this interdisciplinary book is an indispensable resource for researchers and graduate students in engineering, optics and photonics, physics and chemistry.
Download or read book Solar Cells written by Leonid A. Kosyachenko and published by BoD – Books on Demand. This book was released on 2015-10-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters in which the problems of modern photovoltaics are considered. The majority of the chapters provide an overview of the results of research and development of different types of solar cells. Such chapters are completed by a justification for a new solar cell structure and technology. Of course, highly effective solar energy conversion is impossible without an in-depth examination of the solar cell components as physical materials. The relations between structural, thermodynamic, and optical properties of the physical material without addressing the band theory of solids are of both theoretical and practical interest. Requirements formulated for the material are also to be used for maximally efficient conversion of solar radiation into useful work.
Download or read book Handbook of Photovoltaic Science and Engineering written by Antonio Luque and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive, authoritative and widely cited reference on photovoltaic solar energy Fully revised and updated, the Handbook of Photovoltaic Science and Engineering, Second Edition incorporates the substantial technological advances and research developments in photovoltaics since its previous release. All topics relating to the photovoltaic (PV) industry are discussed with contributions by distinguished international experts in the field. Significant new coverage includes: three completely new chapters and six chapters with new authors device structures, processing, and manufacturing options for the three major thin film PV technologies high performance approaches for multijunction, concentrator, and space applications new types of organic polymer and dye-sensitized solar cells economic analysis of various policy options to stimulate PV growth including effect of public and private investment Detailed treatment covers: scientific basis of the photovoltaic effect and solar cell operation the production of solar silicon and of silicon-based solar cells and modules how choice of semiconductor materials and their production influence costs and performance making measurements on solar cells and modules and how to relate results under standardised test conditions to real outdoor performance photovoltaic system installation and operation of components such as inverters and batteries. architectural applications of building-integrated PV Each chapter is structured to be partially accessible to beginners while providing detailed information of the physics and technology for experts. Encompassing a review of past work and the fundamentals in solar electric science, this is a leading reference and invaluable resource for all practitioners, consultants, researchers and students in the PV industry.
Download or read book Photon Absorption Models in Nanostructured Semiconductor Solar Cells and Devices written by Antonio Luque and published by Springer. This book was released on 2015-02-12 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be used by materials and device physicists and also solar cells researchers. It models the performance characteristics of nanostructured solar cells and resolves the dynamics of transitions between several levels of these devices. An outstanding insight into the physical behaviour of these devices is provided, which complements experimental work. This therefore allows a better understanding of the results, enabling the development of new experiments and optimization of new devices. It is intended to be accessible to researchers, but also to provide engineering tools which are often only accessible to quantum physicists. Photon Absorption Models in Nanostructured Semiconductor Solar Cells and Devices is intended to provide an easy-to-handle means to calculate the light absorption in nanostructures, the final goal being the ability to model operational behaviour of nanostructured solar cells. It allows researchers to design new experiments and improve solar cell performances, and offers a means for the easy approximate calculation of the energy spectrum and photon absorption coefficients of nanostructures. This calculation is based on the effective mass model and uses a new Hamiltonian called the Empirical kp Hamiltonian, which is based on a four band kp model.
Download or read book Surface Plasmon Nanophotonics written by Mark L. Brongersma and published by Springer. This book was released on 2007-09-18 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a new class of photonic devices, known as surface plasmon nanophotonic structures. The book highlights several exciting new discoveries, while providing a clear discussion of the underlying physics, the nanofabrication issues, and the materials considerations involved in designing plasmonic devices with new functionality. Chapters written by the leaders in the field of plasmonics provide a solid background to each topic.
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Fundamentals and Applications of Nano Silicon in Plasmonics and Fullerines written by Munir H. Nayfeh and published by Elsevier. This book was released on 2018-06-29 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Applications of Nano Silicon in Plasmonics and Fullerines: Current and Future Trends addresses current and future trends in the application and commercialization of nanosilicon. The book presents current, innovative and prospective applications and products based on nanosilicon and their binary system in the fields of energy harvesting and storage, lighting (solar cells and nano-capacitor and fuel cell devices and nanoLEDs), electronics (nanotransistors and nanomemory, quantum computing, photodetectors for space applications; biomedicine (substance detection, plasmonic treatment of disease, skin and hair care, implantable glucose sensor, capsules for drug delivery and underground water and oil exploration), and art (glass and pottery). Moreover, the book includes material on the use of advanced laser and proximal probes for imaging and manipulation of nanoparticles and atoms. In addition, coverage is given to carbon and how it contrasts and integrates with silicon with additional related applications. This is a valuable resource to all those seeking to learn more about the commercialization of nanosilicon, and to researchers wanting to learn more about emerging nanosilicon applications. - Features a variety of designs and operation of nano-devices, helping engineers to make the best use of nanosilicon - Contains underlying principles of how nanomaterials work and the variety of applications they provide, giving those new to nanosilicon a fundamental understanding - Assesses the viability of various nanoslicon devices for mass production and commercialization, thereby providing an important source of information for engineers
Download or read book Next Generation of Photovoltaics written by Ana Cristobal and published by Springer Science & Business Media. This book was released on 2012-02-16 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new concepts for a next generation of PV. Among these concepts are: Multijunction solar cells, multiple excitation solar cells (or how to take benefit of high energy photons for the creation of more than one electron hole-pair), intermediate band solar cells (or how to take advantage of below band-gap energy photons) and related technologies (for quantum dots, nitrides, thin films), advanced light management approaches (plasmonics). Written by world-class experts in next generation photovoltaics this book is an essential reference guide accessible to both beginners and experts working with solar cell technology. The book deeply analyzes the current state-of-the-art of the new photovoltaic approaches and outlines the implementation paths of these advanced devices. Topics addressed range from the fundamentals to the description of state-of-the-art of the new types of solar cells.
Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.
Download or read book Flexible Solar Cells written by Mario Pagliaro and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the decline in the world's natural resources, the need for new and cheaper energy sources is evolving. One such source is the sun which generates heat and light which can be harnessed and used to our advantage. This reference book introduces the topic of photovoltaics in the form of flexible solar cells. There are explanations of the principles behind this technology, the engineering required to produce these products and the future possibilities offered by this technology. The chemistry and physics of the cells (both organic and inorganic) are clarified as well as production methods, with information how this can then be applied to the nanoscale as well. A complete guide to this new and exciting way of producing energy which will be invaluable to a variety of people from material scientists, chemists, electrical engineers, to management consultants and politicians.
Download or read book Solar Cells written by Martin A. Green and published by . This book was released on 1992 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Organic Solar Cells written by Wolfgang Tress and published by Springer. This book was released on 2014-11-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in a textbook-like fashion the basics or organic solar cells, addressing the limits of photovoltaic energy conversion and giving a well-illustrated introduction to molecular electronics with focus on the working principle and characterization of organic solar cells. Further chapters based on the author’s dissertation focus on the electrical processes in organic solar cells by presenting a detailed drift-diffusion approach to describe exciton separation and charge-carrier transport and extraction. The results, although elaborated on small-molecule solar cells and with focus on the zinc phthalocyanine: C60 material system, are of general nature. They propose and demonstrate experimental approaches for getting a deeper understanding of the dominating processes in amorphous thin-film based solar cells in general. The main focus is on the interpretation of the current-voltage characteristics (J-V curve). This very standard measurement technique for a solar cell reflects the electrical processes in the device. Comparing experimental to simulation data, the author discusses the reasons for S-Shaped J-V curves, the role of charge carrier mobilities and energy barriers at interfaces, the dominating recombination mechanisms, the charge carrier generation profile, and other efficiency-limiting processes in organic solar cells. The book concludes with an illustrative guideline on how to identify reasons for changes in the J-V curve. This book is a suitable introduction for students in engineering, physics, material science, and chemistry starting in the field of organic or hybrid thin-film photovoltaics. It is just as valuable for professionals and experimentalists who analyze solar cell devices.
