Download or read book Fabrication and Comparison Between Poymeric Membrane with Mixed Matrix Membrane on Their Prformance for O2 N2 Separation written by Christabel Melanie Bangga and published by . This book was released on 2012 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of polymeric gas separation membranes is one of the fastest growing branches in membrane technology. There have been many research made on the improvement of the performance of polymeric membranes over the recent years. However, polymeric membranes are somewhat deficient in meeting the requirements of current membrane technology. Therefore, mixed matrix membranes (MMMs), comprising of rigid permeable or impermeable particles such as zeolites, carbon molecular sieves (CMS), silica, and carbon nanotubes, dispersed in a continuous polymeric matrix presents an interesting approach for improving the separation properties of polymeric membranes. The main objective of this study is to compare polymeric membranes with mixed matrix membranes on their performance for O2/N2 separation. This research observed the effect of coating agent, silicone rubber (polydimethylsiloxane) for surface improvement for polymeric membranes and MMMs, as well as the observation of the addition and modification of zeolite 4A using silane coupling agent, 3-aminopropyltrimethoxysilane (APTMOS) in the fabrication of MMMs. The fabrication of asymmetric flat sheet polymeric membranes and MMMs were prepared by using the dry/wet phase inversion technique. The prepared membranes were then coated with silicone rubber diluted in n-hexane in order to decrease the surface defects. Then, the membranes were tested using O2 and N2 gases using permeability test rig. The surface and morphology of the samples were identified by using Scanning Electron Microscopy (SEM). From the results obtained, the coating of membrane surface did enhance the selectivity of coated membranes by caulking the defects on the membrane outer surface layer. The incorporation of zeolite into polymer matrix thus somehow improved the performance of plain polymeric membrane by increasing of selectivity with high permeability. Based on the membrane performance results at 4 bar, the highest selectivity was found using coated modified MMMs at the value of 4.42, followed by coated unmodified MMMs at selectivity of 3.35, coated polymeric membranes at selectivity of 1.46, and finally uncoated polymeric membranes at selectivity of 1.44. The modification of zeolite surface using silane coupling agent improved the adhesion between zeolite and polymer which has increased the selectivity tremendously compared to the unmodified zeolite. Therefore, it is strongly agreed that coated modified MMMs is an alternative way to replace polymeric membranes for the application of membrane-based gas separation.

Download or read book Mixed Matrix Membranes written by Clara Casado-Coterillo and published by MDPI. This book was released on 2019-12-16 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed matrix membranes (MMMs) have attracted a large amount of interest in research laboratories worldwide in recent decades, motivated by the gap between a growing interest in developing novel mixed matrix membranes by various research groups and the lack of large-scale implementation. This Special Issue contains six publications dealing with the current opportunities and challenges of mixed matrix membranes development and applications to solve environmental and health challenges of the society of 21st century.

Download or read book Advanced Materials for Membrane Preparation written by Maria Giovanna Buonomenna and published by Bentham Science Publishers. This book was released on 2012 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to reduce pollution and the waste of energy and resources imposes a wider diffusion of environmentally friendly membrane systems. The expanding domain of membrane operations demands tailored materials with unprecedented performances and resistanc

Download or read book Polymer Membranes written by Mahmoud Atef Abdulhamid and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-05-20 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the comprehensive landscape of polymer membrane applications in this book, encompassing gas separation, organic solvent nanofiltration, water desalination, and fuel cells. The text delves into the subtle influence of polymer membranes on energy efficiency across diverse industries, spotlighting advanced variants such as bio-based, mixed matrix, and polyimides-based membranes. Offering an in-depth analysis, the book elucidates the discovery, development, and challenges associated with these state-of-the-art materials, underscoring their role in achieving enhanced performance and energy efficiency.

Download or read book Gas Separation Membranes written by Ahmad Fauzi Ismail and published by Springer. This book was released on 2015-04-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.

Download or read book Advanced Materials for Membrane Fabrication and Modification written by Stephen Gray and published by CRC Press. This book was released on 2018-08-30 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes are an energy efficient separation technology that are now the basis for many water treatment and food processing applications. However, there is the potential to improve the operating performance of these separations and to extend the application of membranes to energy production, gas separations, organic solvent-based separations, and biomedical applications through novel membrane materials. This book contains 20 chapters written by leading academic researchers on membrane fabrication and modification techniques and provides a comprehensive overview on the recent developments of membrane technology. Membranes can be manufactured from a range of materials including polymeric compounds, and ceramic materials, and both these materials are considered in the book. There are 5 chapters on water and wastewater membranes that cover the fabrication of thin film (TFC) composite membranes for nanofiltration(NF)/reverse osmosis (RO)/forward osmosis (FO) applications, stimuli responsive membranes, electrospun membranes, porous ceramic membranes, and polymeric ultrafiltration (UF) manufacture and modification. There are another 6 chapters on gas separation that consider carbon membranes, zeolite membranes, silica template and metal oxide silica membranes, TFC membranes, silica membranes, and metal organic framework (MOF) membranes. Zeolite membranes are also considered for organic solvent applications, as are solvent-resistant membranes manufactured by phase inversion, ceramic-supported composite membranes, and ceramic NF membranes. The emerging areas of membranes for energy and biomedical applications have 3 and 2 chapters, respectively. Energy applications consider ion exchange membranes for use in fuel cells, membranes for electrodialysis, and membranes for use in microbial fuel cells. For biomedical applications the chapters focus on hemodialysis membranes and redox responsive membranes.

Download or read book Advanced Materials written by Ajit Behera and published by Springer Nature. This book was released on 2021-11-21 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the essential topics in modern materials science. It brings together the spectrum of materials science topics, spanning inorganic and organic materials, nanomaterials, biomaterials, and alloys within a single cohesive and comprehensive resource. Synthesis and processing techniques, structural and crystallographic configurations, properties, classifications, process mechanisms, applications, and related numerical problems are discussed in each chapter. End-of-chapter summaries and problems are included to deepen and reinforce the reader's comprehension. Provides a cohesive and comprehensive reference on a wide range of materials and processes in modern materials science; Presents material in an engaging manner to encourage innovative practices and perspectives; Includes chapter summaries and problems at the end of every chapter for reinforcement of concepts.

Download or read book Two Dimensional Materials Based Membranes written by Wanqin Jin and published by John Wiley & Sons. This book was released on 2022-08-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-Dimensional-Materials-Based Membranes An authoritative and up to date discussion of two-dimensional materials and membranes In Two-Dimensional-Materials-Based Membranes: Preparation, Characterization, and Applications, a team of distinguished chemical engineers delivers a comprehensive exploration of the latest advances in design principles, synthesis approaches, and applications of two-dimensional (2D) materials—like graphene, metal-organic frameworks (MOFs), 2D layered double hydroxides, and MXene—and highlights the significance and development of these membranes. In the book, the authors discuss the use of membranes to achieve high-efficiency separation and to address the challenges posed in the field. The book also discusses potential challenges and benefits in the future development of advanced 2D nanostructures, as well as their impending implementation in applications in the fields of energy, sustainability, catalysis, electronics, and biotechnology. Readers will also find: A thorough introduction to fabrication methods for 2D-materials-based membranes, including the synthesis of nanosheets, membrane structures, and fabrication methods Descriptions of three types of 2D-materials-based membranes: single-layer membranes, laminar membranes and mixed-matrix membranes Comprehensive discussions of 2D-materials-based membranes for water and ions separation, solvent-water separation and gas separation Explorations of transport mechanism of 2D-materials-based membranes for molecular separations Perfect for membrane scientists, inorganic chemists, and materials scientists, Two-Dimensional-Materials-Based Membranes will also earn a place in the libraries of chemical and process engineers in industrial environments.

Download or read book Carbon based Polymer Nanocomposites for Environmental and Energy Applications written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2018-03-28 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications provides the fundamental physico-chemical characterizations of recently explored carbon-based polymer nanocomposites, such as carbon nanotubes, graphene and its derivatives, nanodiamond, fullerenes and other nano-sized carbon allotropes. The book also covers the applications of carbon-based polymer nanocomposite in the environmental and energy fields. Topics range from the various approaches that have been explored and developed for the fabrication of carbon-based polymer nanocomposite, to their applications in tackling environmental and energy related issues. Provides a clear picture of the current state-of-the-art and future trends in carbon-based polymer nanomaterials Explains the interactions between nanofiller-polymer matrices and mechanisms related to applications in environmental pollution and energy shortage Includes computational and experimental studies of the physical and chemical properties of carbon-based polymer nanocomposites Features chapters written by world leading experts

Download or read book Synthetic Polymeric Membranes for Advanced Water Treatment Gas Separation and Energy Sustainability written by Ahmad Fauzi Ismail and published by Elsevier. This book was released on 2020-05-14 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Polymeric Membranes for Advanced Water Treatment, Gas Separation, and Energy Sustainability is a cutting-edge guide that focuses on advanced water treatment applications, covering oily wastewater treatment, desalination, removal of dyes and pigments, photodegradation of organic hazardous materials, heavy metal removal, removal and recovery of nutrients, and volatile organic compounds. Other sections examine the area of gas separation, including acidic gas removal, oxygen enrichment, gas and vapor separation, hydrogen separation, and gas sensing. Final sections cover applications for sustainable energy usage, including the use of synthetic polymer membranes in proton exchange membrane fuel cells (PEMFCs), and more. This is a highly valuable guide for researchers, scientists, and advanced students, working with polymer membranes and films, and across polymer science, polymer chemistry, materials science, chemical e Explains the design, preparation and characterization of synthetic polymer-based membranes for advanced applications Provides a clear picture of the state-of-the-art in the field, including novel fabrication approaches and the latest advances in physico-chemical characterizations Supports the development and implementation of innovative, sustainable solutions to water treatment, gas separation and energy devices

Download or read book Nanotechnology in Membrane Processes written by Kailash Chandra Khulbe and published by Springer Nature. This book was released on 2021-01-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has been established in membrane technology for decades. In this book, comprehensive coverage is given to nanotechnology applications in synthetic membrane processes, which are used in different fields such as water treatment, separation of gases, the food industry, military use, drug delivery, air filtration, and green chemistry. Nanomaterials such as carbon nanotubes, nanoparticles, and dendrimers are contributing to the development of more efficient and cost-effective water filtration processes. Gas separation and carbon capture can be significantly improved in flue gas applications. Nanoporous membrane systems engineered to mimic natural filtration systems are being actively developed for use in smart implantable drug delivery systems, bio artificial organs, and other novel nano-enabled medical devices. The microscopic structure of nanoporous ceramic membranes, mainly focusing on zeolite materials, as well as the energy-saving effect of membrane separation, contribute to various chemical synthesis processes. In the food industry, nanotechnology has the potential to create new tools for pathogen detection and packaging. For each application, nanotechnology is mostly used to make composite membranes, and the book provides a detailed look at the mechanisms by which the composite membrane works in each application area.

Download or read book Nanostructure Control of Materials written by R H J Hannink and published by Taylor & Francis US. This book was released on 2006-02-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Nanotechnology is an area of science and technology where dimensions and tolerances in the range of 0.1 nm to 100nm play a critical role. Nanotechnology has opened up new worlds of opportunity. It encompasses precision engineering as well as electronics, electromechanical systems and mainstream biomedical applications in areas as diverse as gene therapy, drug delivery and novel drug discovery techniques. Nanostructured materials present exciting opportunities for manipulating structure and properties on the nanometer scale. The ability to engineer novel structures at the molecular level has led to unprecedented opportunities for materials design. This new book provides detailed insights into the synthesis/structure and property relationships of nanostructured materials. A valuable book for materials scientists, mechanical and electronic engineers and medical researchers. CONTENTS Special properties resulting from nanodimensionality; Nanoparticle technologies; Control of molecular assemblies; Functional organic inorganic nanocomposites; Molecular modelling of nanomorphology in polymers; Nanodimensionality and ionic transport; Multi scale simulation of nanionic polymer systems; Nanoengineering in metallic systems; Characterisation of nanometallic systems with NMR; Mechanical behaviour of metallic nanolaminates; Mechanics of nanocomposite structures; Preparation, properties and performance of Nanocrystalline ceramics; Novel properties from nanoceramics; Hydrogen storage in nanostructured materials; Nanofabrication.

Download or read book Handbook of Membrane Separations written by Anil K. Pabby and published by CRC Press. This book was released on 2023-12-22 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Handbook of Membrane Separations: Chemical, Pharmaceutical, Food, and Biotechnological Applications provides a comprehensive discussion of membrane applications. Fully updated to include the latest advancements in membrane science and technology, it is a one-of-its-kind overview of the existing literature. This fully illustrated handbook is written by experts and professionals in membrane applications from around the world. Key Features: Includes entirely new chapters on organic solvent-resistant nanofiltration, membrane condensers, membrane-reactors in hydrogen production, membrane materials for haemodialysis, and integrated membrane distillation Covers the full spectrum of membrane technology and its advancements Explores membrane applications in a range of fields, from biotechnological and food processing to industrial waste management and environmental engineering This book will appeal to both newcomers to membrane science as well as engineers and scientists looking to expand their knowledge on upcoming advancements in the field.

Download or read book Facilitated Transport Membranes FTMs for CO2 Capture Overview and Future Trends written by Sarah Farrukh and published by Springer Nature. This book was released on 2023-02-13 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the importance of Facilitated Transport Membranes (FTMs) for the application of carbon capture, covering its introduction, gas transport phenomena and models, reaction mechanisms, industrial applications such as bio-gas upgradation, flue gas separation, hydrogen gas and natural gas purification, fabrication methods of both FTMs and their carrier mediums, testing/characterization techniques, techno-analysis with up-to-date trends and the future outlooks. Climate change and environmental impacts are resulted due to greenhouse gases, particularly CO2. The industrial revolution is currently causing the augmented emission of greenhouse gases. Therefore, various technologies are being looked at to overcome these problems. In which, membrane technology is key among them and is envisaged for many industrial applications, especially for gas separations and carbon capture. Considering this, FTMs are being actively investigated due to their remarkable gas separation performance. This book describes the working principle of FTMs and includes case studies to explore their impact on different industrial applications. Also, the book highlights how FTMs are reshaping science to capture CO2 for reducing climate and environmental impacts.

Download or read book Advances in Natural Gas Formation Processing and Applications Volume 2 Natural Gas Sweetening written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2024-02-16 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Natural Gas: Formation, Processing, and Applications is a comprehensive eight-volume set of books that discusses in detail the theoretical basics and practical methods of various aspects of natural gas from exploration and extraction, to synthesizing, processing and purifying, producing valuable chemicals and energy. The volumes introduce transportation and storage challenges as well as hydrates formation, extraction, and prevention. Volume 2 titled Natural Gas Sweetening introduces in detail different natural gas sweetening methods. The book covers absorption with different solvents such as alkalis, amin blends, ionic liquids, etc. which is one of the important sweetening techniques, as well as natural gas sweetening with adsorption-based technologies utilizing various materials including zeolites, carbonaceous sorbents, metal oxides, etc. Is also discusses membrane-based processes with various types (such as ionic liquid, polymeric, MOF mixed matrix, dense metal membranes) and includes novel technologies for sweetening natural gas by using plasma and supersonic separators. Introduces natural gas sweetening concepts and challenges Describes various absorption and adsorption processes for natural gas sweetening Includes various membrane technologies for natural gas sweetening

Download or read book Current Trends and Future Developments on Bio Membranes written by Angelo Basile and published by Elsevier. This book was released on 2023-11-21 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Approaches in Membrane Technology for Gas Separation and Water Treatment presents condensed information on novel and promising membrane materials. The book answers some major questions from the membrane community about three promising materials that are to be introduced at industrial scale. It introduces recent, out of the box, ideas concerning the application of new methods capable to enhance the membrane separation efficiency. Sections cover potential commercialization, important question on three famous membrane materials, and new approaches in membrane technology. Finally, the book describes and discusses three novel ideas about the potential effect of the magnetic field on membrane separation efficiency, the use of cryogenic technology on membrane separations, and the use of nanobubble technology on water membrane processes. Focuses on the necessity for environmental-friendly and cost-effective purification and separation process Lists all new membrane materials suitable for commercialization Presents new modern approaches and ideas for improving the membrane efficiency

Download or read book Microporous Materials for Separation Membranes written by Xiaoqin Zou and published by John Wiley & Sons. This book was released on 2019-09-16 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to membrane separation based on a variety of porous materials with promising separation applications Microporous Materials for Separation Membranes offers an in-depth guide that explores microporous materials? potential for membrane applications. The authors?two experts on the topic?examine a wide range of porous materials that have application potential including: microporous silica, porous carbons, zeolites, metal-organic frameworks (MOFs), and porous organic frameworks (POFs). Comprehensive in scope, the book covers a broad range of topics on membrane separations such as: hydrogen recovery, carbon dioxide capture, air purification, hydrocarbon separation, pervaporation, and water treatment. In addition, this up-to-date resource explores the most recent materials for preparing microporous membranes and explores the most promising applications for industrial use. This important book: -Examines the use of microporous materials as membranes to perform with different gases and liquids -Offers an overview of the basic knowledge of membrane separation and an intense examination of separations -Describes the state-of-the-art of membrane separation with porous materials -Highlights the most promising applications of industrial interest Written for scientists working in the fields of membranes, gas and liquid, Microporous Materials for Separation Membranes offers a valuable guide to the potential of microporous materials for membrane applications.