Download or read book Fabrication and Characterization of Surface Textured GaInN Vertically Structured Light emitting Diodes with Omni directional Reflectors as Light extraction enhancement Technique written by Roya Mirhosseini and published by . This book was released on 2008 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Plasmon Nanophotonics written by Mark L. Brongersma and published by Springer. This book was released on 2007-09-18 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a new class of photonic devices, known as surface plasmon nanophotonic structures. The book highlights several exciting new discoveries, while providing a clear discussion of the underlying physics, the nanofabrication issues, and the materials considerations involved in designing plasmonic devices with new functionality. Chapters written by the leaders in the field of plasmonics provide a solid background to each topic.
Download or read book III Nitride Based Light Emitting Diodes and Applications written by Tae-Yeon Seong and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light emitting diodes (LEDs) are already used in traffic signals, signage lighting, and automotive applications. However, its ultimate goal is to replace traditional illumination through LED lamps since LED lighting significantly reduces energy consumption and cuts down on carbon-dioxide emission. Despite dramatic advances in LED technologies (e.g., growth, doping and processing technologies), however, there remain critical issues for further improvements yet to be achieved for the realization of solid-state lighting. This book aims to provide the readers with some contemporary LED issues, which have not been comprehensively discussed in the published books and, on which the performance of LEDs is seriously dependent. For example, most importantly, there must be a breakthrough in the growth of high-quality nitride semiconductor epitaxial layers with a low density of dislocations, in particular, in the growth of Al-rich and and In-rich GaN-based semiconductors. The materials quality is directly dependent on the substrates used, such as sapphire, Si, etc. In addition, efficiency droop, growth on different orientations and polarization are also important. Chip processing and packaging technologies are key issues. This book presents a comprehensive review of contemporary LED issues. Given the interest and importance of future research in nitride semiconducting materials and solid state lighting applications, the contents are very timely. The book is composed of chapters written by leading researchers in III-nitride semiconducting materials and device technology. This book will be of interest to scientists and engineers working on LEDs for lighting applications. Postgraduate researchers working on LEDs will also benefit from the issues this book provides.
Download or read book Azobenzene Containing Materials written by Almeria Natansohn and published by Wiley-VCH. This book was released on 1999-06-24 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Azobenzene is an unusual "regular" molecule with fascinating possibilities and endless surprises. The mono- and multilayer behavior of azobenzene-containing materials, the photoinduced motion, and the possibility of massive material displacement well below the glass transition temperature open yet new avenues of research and applications. This book contains oral and poster presentations of the symposium "Azobenzene-Containing materials" held at Boston ACS Fall Meeting 1998. It will help people understand why is this subject so fascinating and it will attract even more researchers to the area.
Download or read book Handbook of Advanced Lighting Technology written by Robert Karlicek and published by Springer. This book was released on 2016-05-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Advanced Lighting Technology is a major reference work on the subject of light source science and technology, with particular focus on solid-state light sources – LEDs and OLEDs – and the development of 'smart' or 'intelligent' lighting systems; and the integration of advanced light sources, sensors, and adaptive control architectures to provide tailored illumination which is 'fit to purpose.' The concept of smart lighting goes hand-in-hand with the development of solid-state light sources, which offer levels of control not previously available with conventional lighting systems. This has impact not only at the scale of the individual user, but also at an environmental and wider economic level. These advances have enabled and motivated significant research activity on the human factors of lighting, particularly related to the impact of lighting on healthcare and education, and the Handbook provides detailed reviews of work in these areas. The potential applications for smart lighting span the entire spectrum of technology, from domestic and commercial lighting, to breakthroughs in biotechnology, transportation, and light-based wireless communication. Whilst most current research globally is in the field of solid-state lighting, there is renewed interest in the development of conventional and non-conventional light sources for specific applications. This Handbook comprehensively reviews the basic physical principles and device technologies behind all light source types and includes discussion of the state-of-the-art. The book essentially breaks down into five major sections: Section 1: The physics, materials, and device technology of established, conventional, and emerging light sources, Section 2: The science and technology of solid-state (LED and OLED) light sources, Section 3: Driving, sensing and control, and the integration of these different technologies under the concept of smart lighting, Section 4: Human factors and applications, Section 5: Environmental and economic factors and implications
Download or read book Photonic Crystals written by John D. Joannopoulos and published by Princeton University Press. This book was released on 2011-10-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since it was first published in 1995, Photonic Crystals has remained the definitive text for both undergraduates and researchers on photonic band-gap materials and their use in controlling the propagation of light. This newly expanded and revised edition covers the latest developments in the field, providing the most up-to-date, concise, and comprehensive book available on these novel materials and their applications. Starting from Maxwell's equations and Fourier analysis, the authors develop the theoretical tools of photonics using principles of linear algebra and symmetry, emphasizing analogies with traditional solid-state physics and quantum theory. They then investigate the unique phenomena that take place within photonic crystals at defect sites and surfaces, from one to three dimensions. This new edition includes entirely new chapters describing important hybrid structures that use band gaps or periodicity only in some directions: periodic waveguides, photonic-crystal slabs, and photonic-crystal fibers. The authors demonstrate how the capabilities of photonic crystals to localize light can be put to work in devices such as filters and splitters. A new appendix provides an overview of computational methods for electromagnetism. Existing chapters have been considerably updated and expanded to include many new three-dimensional photonic crystals, an extensive tutorial on device design using temporal coupled-mode theory, discussions of diffraction and refraction at crystal interfaces, and more. Richly illustrated and accessibly written, Photonic Crystals is an indispensable resource for students and researchers. Extensively revised and expanded Features improved graphics throughout Includes new chapters on photonic-crystal fibers and combined index-and band-gap-guiding Provides an introduction to coupled-mode theory as a powerful tool for device design Covers many new topics, including omnidirectional reflection, anomalous refraction and diffraction, computational photonics, and much more.
Download or read book Photonic Crystals Physics and Technology written by Concita Sibilia and published by Springer Science & Business Media. This book was released on 2009-02-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the work is give an overview of the activity in the field of Photonic Crystal developed in the frame of COST P11 action . The main objective of the COST P11 action was to unify and coordinate national efforts aimed at studying linear and nonlinear optical interactions with Photonic Crystals (PCs), without neglecting an important aspect related to the material research as idea and methods of realizations of 3D PC, together with the development and implementation of measurement techniques for the experimental evaluation of their potential applications in different area, as for example telecommunication with novel optical fibers, lasers, nonlinear multi-functionality, display devices, opto-electronics, sensors. The book contains contributions from authors who gave their lecture at the Cost P11 Training School.
Download or read book Spatial Augmented Reality written by Oliver Bimber and published by CRC Press. This book was released on 2005-08-08 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like virtual reality, augmented reality is becoming an emerging platform in new application areas for museums, edutainment, home entertainment, research, industry, and the art communities using novel approaches which have taken augmented reality beyond traditional eye-worn or hand-held displays. In this book, the authors discuss spatial augmented r
Download or read book Plasmonics Fundamentals and Applications written by Stefan Alexander Maier and published by Springer Science & Business Media. This book was released on 2007-05-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considered a major field of photonics, plasmonics offers the potential to confine and guide light below the diffraction limit and promises a new generation of highly miniaturized photonic devices. This book combines a comprehensive introduction with an extensive overview of the current state of the art. Coverage includes plasmon waveguides, cavities for field-enhancement, nonlinear processes and the emerging field of active plasmonics studying interactions of surface plasmons with active media.
Download or read book Optoelectronic Devices written by M Razeghi and published by Elsevier. This book was released on 2004 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous progress has been made in the last few years in the growth, doping and processing technologies of the wide bandgap semiconductors. As a result, this class of materials now holds significant promis for semiconductor electronics in a broad range of applications. The principal driver for the current revival of interest in III-V Nitrides is their potential use in high power, high temperature, high frequency and optical devices resistant to radiation damage. This book provides a wide number of optoelectronic applications of III-V nitrides and covers the entire process from growth to devices and applications making it essential reading for those working in the semiconductors or microelectronics. Broad review of optoelectronic applications of III-V nitrides
Download or read book Nitride Semiconductor Light Emitting Diodes LEDs written by Jian-Jang Huang and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of nitride-based light-emitting diodes (LEDs) has led to advancements in high-brightness LED technology for solid-state lighting, handheld electronics, and advanced bioengineering applications. Nitride Semiconductor Light-Emitting Diodes (LEDs) reviews the fabrication, performance, and applications of this technology that encompass the state-of-the-art material and device development, and practical nitride-based LED design considerations. Part one reviews the fabrication of nitride semiconductor LEDs. Chapters cover molecular beam epitaxy (MBE) growth of nitride semiconductors, modern metalorganic chemical vapor deposition (MOCVD) techniques and the growth of nitride-based materials, and gallium nitride (GaN)-on-sapphire and GaN-on-silicon technologies for LEDs. Nanostructured, non-polar and semi-polar nitride-based LEDs, as well as phosphor-coated nitride LEDs, are also discussed. Part two covers the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots. Further chapters discuss the development of LED encapsulation technology and the fundamental efficiency droop issues in gallium indium nitride (GaInN) LEDs. Finally, part three highlights applications of nitride LEDs, including liquid crystal display (LCD) backlighting, infrared emitters, and automotive lighting. Nitride Semiconductor Light-Emitting Diodes (LEDs) is a technical resource for academics, physicists, materials scientists, electrical engineers, and those working in the lighting, consumer electronics, automotive, aviation, and communications sectors. - Reviews fabrication, performance, and applications of this technology that encompass the state-of-the-art material and device development, and practical nitride-based LED design considerations - Covers the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots - Highlights applications of nitride LEDs, including liquid crystal display (LCD) backlighting, infra-red emitters, and automotive lighting
Download or read book Optical Properties of Semiconductor Nanostructures written by Marcin L. Sadowski and published by Springer Science & Business Media. This book was released on 2000-06-30 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical methods for investigating semiconductors and the theoretical description of optical processes have always been an important part of semiconductor physics. Only the emphasis placed on different materials changes with time. Here, a large number of papers are devoted to quantum dots, presenting the theory, spectroscopic investigation and methods of producing such structures. Another major part of the book reflects the growing interest in diluted semiconductors and II-IV nanosystems in general. There are also discussions of the fascinating field of photonic crystals. `Classical' low dimensional systems, such as GsAs/GaAlAs quantum wells and heterostructures, still make up a significant part of the results presented, and they also serve as model systems for new phenomena. New materials are being sought, and new experimental techniques are coming on stream, in particular the combination of different spectroscopic modalities.
Download or read book Billmeyer and Saltzman s Principles of Color Technology written by Roy S. Berns and published by John Wiley & Sons. This book was released on 2019-04-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers detailed coverage of color, colorants, the coloring of materials, and reproducing the color of materials through imaging. It combines the clarity and ease of earlier editions with significant updates about the advancement in color theory and technology. Provides guidance for how to use color measurement instrumentation, make a visual assessment, set a visual tolerance, and select a formulation Supplements material with numerical examples, graphs, and illustrations that clarify and explain complex subjects Expands coverage of topics including spatial vision, solid-state lighting, cameras and spectrophotometers, and translucent materials
Download or read book Reliability Investigation of LED Devices for Public Light Applications written by Raphael Baillot and published by Elsevier. This book was released on 2017-03-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Investigation of LED Devices for Public Light Applications focuses on state-of-the-art GaN-based LED technology through the study of typical failure mechanisms in public lighting applications. Across the different chapters, the reader will explore the tools and analyses involved in the study and application of a number of different LED devices. The authors review GaN-based LED technology by focusing on the main failure mechanisms targeting polymer-based packaging, thanks to electrical and spectral models. The proposed technology and methodologies will help those interested in the topic to further their knowledge of failure mechanisms, exploring the physical and chemical analyses involved. - Based on the work of two main Phd results in 2011 and 2014 - Describes GaN technology in the state-of-the-art, focusing on the specific electrical and spectral model - Proposes the technology and methodologies to understand failure mechanisms
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Download or read book Spectroscopic Ellipsometry written by Hiroyuki Fujiwara and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ellipsometry is a powerful tool used for the characterization of thin films and multi-layer semiconductor structures. This book deals with fundamental principles and applications of spectroscopic ellipsometry (SE). Beginning with an overview of SE technologies the text moves on to focus on the data analysis of results obtained from SE, Fundamental data analyses, principles and physical backgrounds and the various materials used in different fields from LSI industry to biotechnology are described. The final chapter describes the latest developments of real-time monitoring and process control which have attracted significant attention in various scientific and industrial fields.
Download or read book III Nitride Ultraviolet Emitters written by Michael Kneissl and published by Springer. This book was released on 2015-11-12 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the state-of-the-art in group III-nitride based ultraviolet LED and laser technologies, covering different substrate approaches, a review of optical, electronic and structural properties of InAlGaN materials as well as various optoelectronic components. In addition, the book gives an overview of a number of key application areas for UV emitters and detectors, including water purification, phototherapy, sensing, and UV curing. The book is written for researchers and graduate level students in the area of semiconductor materials, optoelectronics and devices as well as developers and engineers in the various application fields of UV emitters and detectors.
