Download or read book Fabrication and Characterization of Silicon and Polysilicon Nanogaps Electrodes Using Size Reduction Technique for Chemical and Biomolecules Detection written by Thakra S. Dhahi and published by . This book was released on 2012 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this research work is to design, fabricate, characterize, and test nanogap-electrode based device for biochemical detection and DNA immobilization and hybridization detection. However, the focus of this research is to investigate electrically and chemically the effect of different materials and gap sizes on the nanogap electrodes design.
Download or read book Fabrication and Characterization of Poly Silicon Dioxide Nanogap Based on Capacitive Sensor by Using Size Expansion Technique written by Nazwa Taib and published by . This book was released on 2012 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this research is to design, fabricate and characterize an array of planar nanogap capacitive sensor based on Poly-SiO2 structure by using size expansion technique.
Download or read book Synthesis Characterization and Integration of Silicon Nanowires for Nanosystems Technology written by Gregory Stephen Doerk and published by . This book was released on 2010 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon's chemical stability, high natural abundance (as the second most common element in the earth's crust), mechanical stiffness, and semiconducting behavior have made it the subject of extensive scientific investigation and the material of choice for both the microelectronics and microelectromechanical device industries. The success of Moore's Law that demands continual size reduction has directed it to a central place in emerging nanoscience and nanotechnology as well. Crystalline nanowires (NWs) are one nanostructured form that silicon may take that has sparked significant interest as they can exhibit considerable confinement effects and high surface-to-volume ratios, but may be interfaced simply along one direction for the determination of material properties and implementation into new technologies. The expense and difficulty involved in the creation of semiconductor nanowires using the "top down" fabrication techniques of the microelectronics industry has promoted an explosion of chemical synthetic "bottom up" techniques to produce high quality crystalline nanowires in large quanitities. Nevertheless, bottom up synthesized Si NWs retain a new set of challenges for their successful integration into reliable, high-performance devices, which is hindered by an incomplete understanding of the factors controlling their material properties. The first chapter of this dissertation introduces the motivation for studying semiconductor NWs and the benefits of limiting the scope to silicon alone. A brief survey of the current understanding of thermal conductivity in silicon nanowires provides prime examples of how confinement effects and surface morphology may dramatically alter nanowire properties from their bulk crystal counterparts. The particular challenges to bottom up silicon nanowire device integration and characterization are noted, especially related to Si nanowires that are grown epitaxially on crystal silicon substrates, and Raman spectroscopy is introduced as a promising optical characterization and metrology tool for semiconductor nanowire based devices. Chapter two describes the vapor-liquid-solid (VLS) mechanism for the synthesis of very high quality, single-crystal silicon nanowires using Au and Pt catalyst nanoparticles. A new technique is presented for the simplified synthesis of branched silicon nanowires based on the migration of Au catalyst during an hydrogen anneal intermediate between growth stages, and the faceting behavior at synthetic stages is revealed by the analysis of electron microscope images. Synthesis of solid and porous Si nanowires based on Ag mediated electrochemical silicon etching is described as well. The third chapter specifies new processing techniques developed with future device integration of epitaxially VLS-grown Si nanowires in mind. Epitaxially bridging nanowires are shown to provide an excellent platform for single-wire electrical and mechanical property measurements. Galvanic displacement through block copolymer micelle/homopolymer surface templates is demonstrated as a means to deposit catalyst nanoparticles with controlled sizes and areal densities in a variety of geometries and with registration to photolithographic patterns. Ex situ boron doping by the direct hydrogen reduction of boron tribromide is shown to achieve active concentrations exceeding 1019 cm-3 with high axial uniformity, while avoiding the adverse impact on nanowire morphology that is often observed with in situ boron doping of silicon nanowires. Chapter four describes the characteristics of Raman spectroscopy that are relevant to studying individual semiconductor nanowires. Careful spectral measurements show that the anharmonic dependence of Raman spectra on temperature for individual Si nanowires remains unchanged from the bulk crystal for diameters down to 30 nm, regardless of surface morphology. Using this result, a new technique for measuring the thermal conductivity of individual semiconductor nanowires is then outlined based on Raman thermal mapping of individual cantilevered nanowires. Finally, the dissertation is concluded with suggestions for possible future experiments. One avenue is to probe more deeply the morphology of faceted silicon nanowires and nanotrees and its impact on their transport physics. Another possible route for further study would be to explore new characterization and metrological applications of Raman spectrocopy for semiconductor nanowires.
Download or read book Fabrication and Characterization of Vertical Silicon Nanowire Arrays written by Jeffrey M. Weisse and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectric devices, which convert temperature gradients into electricity, have the potential to harness waste heat to improve overall energy efficiency. However, current thermoelectric devices are not cost-effective for most applications due to their low efficiencies and high material costs. To improve the overall conversion efficiency, thermoelectric materials should possess material properties that closely resemble a "phonon glass" and an "electron crystal". The desired low thermal and high electrical conductivities allow the thermoelectric device to maintain a high temperature gradient while effectively transporting current. Unfortunately, thermal transport and electrical transport are a closely coupled phenomena and it is difficult to independently engineer each specific conduction mechanism in conventional materials. One strategy to realize this is to generate nanostructured silicon (e.g. silicon nanowires (SiNWs)), which have been shown to reduce thermal conductivity ([kappa]) through enhanced phonon scattering while theoretically preserving the electronic properties; therefore, improving the overall device efficiency. The ability to suppress phonon propagation in nanostructured silicon, which has a bulk phonon mean free path ~ 300 nm at 300 K, has raised substantial interest as an ultra-low [kappa] material capable of reducing the thermal conductivity up to three orders of magnitude lower than that of bulk silicon. While the formation of porous silicon and SiNWs has individually been demonstrated as promising methods to reduce [kappa], there is a lack of research investigating the thermal conductivity in SiNWs containing porosity. We fabricated SiNW arrays using top-down etching methods (deep reactive ion etching and metal-assisted chemical etching) and by tuning the diameter with different patterning methods and tuning the internal porosity with different SiNW etching conditions. The effects of both the porosity and the SiNW dimensions at the array scale are investigated by measuring [kappa] of vertical SiNW arrays using a nanosecond time-domain thermoreflectance technique. In addition to thermoelectric devices, vertical SiNW arrays, due to their anisotropic electronic and optical properties, large surface to volume ratios, resistance to Li-ion pulverization, ability to orthogonalize light absorption and carrier transport directions, and trap light, make vertical SiNW arrays important building blocks for various applications. These may include sensors, solar cells, and Li-ion batteries. Many of these applications benefit from vertical SiNW arrays fabricated on non-silicon based substrates which endow the final devices with the properties of flexibility, transparency, and light-weight while removing any performance limitation of the silicon fabrication substrate. We then developed two vertical transfer printing methods (V-TPMs) that are used to detach SiNW arrays from their original fabrication substrates and subsequently attach them to any desired substrate while retaining their vertical alignment over a large area. The transfer of vertically aligned arrays of uniform length SiNWs is desirable to remove the electrical, thermal, optical, and structural impact from the fabrication substrate and also to enable the integration of vertical SiNWs directly into flexible and conductive substrates. Moreover, realization of a thermoelectric device requires the formation of electrical contacts on both sides of the SiNW arrays. We formed metallic contacts on both ends of the SiNW arrays with a mechanical supporting and electrical insulating polymer in between. Electrical characterization of the SiNW devices exhibited good current-voltage (I-V) characteristics independent of substrates materials and bending conditions. We believe the V-TPMs developed in this work have great potential for manufacturing practical thermoelectric devices as well as high performing, scalable SiNW array devices on flexible and conducting substrates.
Download or read book Fabrication and Characterization of Polypyrrole glucose Oxidase Electrode on a Microfabricated Capillary Electrophoresis Chip written by Jayadeep Gullapalli and published by . This book was released on 2005 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on lab-on-a-chip devices fabricated by traditional microfabrication techniques are gaining importance in the field of analytical chemistry. In particular there is an increasing demand for miniaturized biosensors based on enzymes owing to their applications in clinical analysis. With respect to Capillary Electrophoresis (CE) microchips, enzymes can impart a greater degree of selectivity. The technique of electrochemical polymerization was used to immobilize glucose oxidase on the CE microchip. Polypyrrole was used an immobilization matrix. The second chapter describes the experimental procedure for the immobilization of glucose oxidase on the CE microchip device. A two-step procedure was employed, which involved a thin layer of polypyrrole followed by a thick layer of polypyrrole/glucose oxidase film. The third chapter deals with the results obtained using a CE microchip.
Download or read book Fabrication and Characterization of Nanostructured Electrodes for More Efficient Low invasiveness Neural Interfaces written by Beatriz Loreto Rodilla González and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neurological disorders produce serious cognitive and motor disabilities, and they account for 7% of total global disease burden, measured in disability‐adjusted life years. In addition, the life expectancy has been continuously growing during the last decades and, as a consequence, neurodegenerative disorders are becoming more prevalent representing a larger part of the healthcare efforts and expenses. Every year, treating brain conditions accounts for 35% of Europe’s disease burden with a yearly cost of €798.000 million. Despite the efforts performed in the medical and science fields, the cure for most of the neurological disorders is far from being achieved. One of the most efficient strategies to treat neurological disorders is the use of implanted electrodes to produce neural electrical stimulation. Furthermore, electrodes are one of the main neural interfaces used in diagnostics techniques, and for the study of the neural activity in basic investigation, in vitro and in vivo. Despite their enormous potential, these electrodes face nowadays limitations. Generally, they are too big, producing unspecific stimulation that can lead to secondary effects. Their size reduction is limited by the associated impedance increase, which restricts their charge‐injection to the tissue...
Download or read book Fabrication and Characterization of Silicon Nanowire FETs with Coupled Dopants Induced Quantum Dot written by Zhencheng Tan and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Fabrication of Nanogap Electrodes Using Nanoskiving written by Rijksuniversiteit Groningen and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon and Silicon Carbide Nanowires written by John Paul Alper and published by . This book was released on 2014 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: For applications in mobile and remote sensing platforms, microsupercapacitors are attractive energy storage devices due to their robust lifetimes and high specific power capacity. Utilization of green electrolytes in these devices reduces environmental impact and simplifies packaging by avoiding the stringent oxygen and moisture free conditions required for organic and ionic liquid based electrolytes. Porous silicon nanowire based microsupercapacitor electrode materials are promising for on chip applications using an environmentally benign aqueous electrolyte, 1 M KCl, however they are prone to oxidation. A silicon carbide coating was found to mitigate this issue. The fabrication techniques, involving low-temperature electroless etching of silicon, are compatible with current integrated circuit processing methods and may be readily integrated at the micro device level. The electrode materials are in good electrical contact with the underlying substrate and require no additional current collector. The base porous silicon nanowires are coated with a thin silicon carbide passivation layer by low pressure chemical vapor deposition. The demonstrated capacitance of the electrode materials, ~1700 [mu]F/cm2 projected area, is comparable to other carbon based microsupercapacitor electrodes, remains stable over many charge/discharge cycles, and maintains capacitive behavior over a wide range of charge/discharge rates. An improved passivation method for the porous silicon nanowires has also been developed. The selective coating procedure deposits an ultra-thin (~ 1-3 nm) carbon sheath over the nanowires and passivates them. The ultra-thin nature of the coating enables solvent access to the pore area and hence a large improvement of active specific surface over the SiC coated PSiNWs discussed above. The electrochemical performance of these coated nanowires is characterized in both an aqueous electrolyte and an ionic liquid electrolyte. Specific capacitance values reaching 325 mF cm 2 are achieved in ionic liquid, and calculations indicate that the theoretical maximum capacitance of the pristine wires is reached. TEM studies confirm the coating thickness and its conformality. Raman spectroscopy indicates that the carbon in the coating is mainly sp2 hybridized, with corresponding high conductivity. At the time of writing, these materials represent the largest specific energy microsupercapacitor electrode published. A test device is prepared and demonstrated powering an LED. The testing results of silicon carbide (SiC) nanowires (NW) as an electrode material for micro-supercapacitors is described. SiC NWs are grown on a SiC thin film coated with a thin Ni catalyst layer via chemical vapor deposition. A specific capacitance of ~240 μF cm-2 is demonstrated. Charge-discharge studies demonstrate the SiC nanowires exhibit exceptional stability, with 95% capacitance retention after 2×105 charge/discharge cycles in an environmentally benign, aqueous electrolyte. Doping of the nanowires with nitrogen through the addition of 5 at% ammonia to the precursor gas flow rate improves the conductivity of the nanowire films by over an order of magnitude leading to increased power capabilities. A method to transfer silicon and silicon carbide nanowire arrays to arbitrary substrates while maintaining electrical contact through the entire array is elucidated. The nanowires are grown on graphene sheets on SiO2 coupons. The graphene acts as both the flexible material for maintaining structural continuity and electrical contact through the array during transfer. The SiO2 acts as the sacrificial growth substrate which is etched after growth in order to release the nanowire/graphene hybrid. The nanowire/graphene hybrids are structurally characterized by XRD and electron microscopy. Good electrical contact is confirmed through testing of the SiCNW/graphene hybrids as supercapacitor electrode materials in an aqueous electrolyte. The specific capacitance, ~340 mF cm-2, is similar to SiCNW arrays grown on oxide while the electrical conductivity is improved and cycling stability tests show less than a 1% decrease in capacitance after 10,000 cycles.
Download or read book Fabrication of Nanogap Electrodes by Selective area Copper Atomic Layer Deposition written by Xiaoqiang Jiang and published by . This book was released on 2014 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Silicon Nanowires and Metal Nanostructures microform written by Lui, Vicki Wai-Shum and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2005 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.
Download or read book NanoBioEngineering written by Bhupinder Singh and published by CRC Press. This book was released on 2018-11-02 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide the fundamental comprehension of a broad range of topics in an integrated volume such that readership hailing from diverse disciplines can rapidly acquire the necessary background for applying it in pertinent research and development field.
Download or read book Cell Analysis on Microfluidics written by Jin-Ming Lin and published by Springer. This book was released on 2017-10-25 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed overview of the design, formatting, application, and development of microfluidic chips in the context of cell biology research, enumerating each element involved in microfluidics-based cell analysis, discussing its history, status quo, and future prospects, It also offers an extensive review of the research completed in the past decade, including numerous color figures. The individual chapters are based on the respective authors' studies and experiences, providing tips from the frontline to help researchers overcome bottlenecks in their own work. It highlights a number of cutting-edge techniques, such as 3D cell culture, microfluidic droplet technique, and microfluidic chip-mass spectrometry interfaces, offering a first-hand impression of the latest trends in the field and suggesting new research directions. Serving as both an elementary introduction and advanced guidebook, the book interests and inspires scholars and students who are currently studying microfluidics-based cell analysis methods as well as those who wish to do so.
Download or read book Nanotechnology in Space written by Maria Letizia Terranova and published by CRC Press. This book was released on 2021-09-15 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected topics on nanotechnological applications in the strategic sector of space. It showcases some current activities and multidisciplinary approaches that have given an unprecedented control of matter at the nanoscale and will enable it to withstand the unique space environment. It focuses on the outstanding topic of dual-use nanotechnologies, illustrating the mutual benefits of key enabling materials that can be used successfully both on earth and in space. It highlights the importance of space as a strategic sector in the global economy, with ever-increasing related businesses worldwide. In this light, it dedicates a chapter to the analysis of current and future markets for space-related nanotechnological products and applications.
Download or read book Handbook of Biofunctional Surfaces written by Wolfgang Knoll and published by CRC Press. This book was released on 2013-05-22 with total page 1174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and synthesis of molecularly or supramolecularly defined interfacial architectures have seen in recent years a remarkable growth of interest and scientific research activities for various reasons. On the one hand, it is generally believed that the construction of an interactive interface between the living world of cells, tissue, or whol
Download or read book Introduction to Nanoscience written by Stuart Lindsay and published by OUP Oxford. This book was released on 2009-10-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience is not physics, chemistry, engineering or biology. It is all of them, and it is time for a text that integrates the disciplines. This is such a text, aimed at advanced undergraduates and beginning graduate students in the sciences. The consequences of smallness and quantum behaviour are well known and described Richard Feynman's visionary essay 'There's Plenty of Room at the Bottom' (which is reproduced in this book). Another, critical, but thus far neglected, aspect of nanoscience is the complexity of nanostructures. Hundreds, thousands or hundreds of thousands of atoms make up systems that are complex enough to show what is fashionably called 'emergent behaviour'. Quite new phenomena arise from rare configurations of the system. Examples are the Kramer's theory of reactions (Chapter 3), the Marcus theory of electron transfer (Chapter 8), and enzyme catalysis, molecular motors, and fluctuations in gene expression and splicing, all covered in the final Chapter on Nanobiology. The book is divided into three parts. Part I (The Basics) is a self-contained introduction to quantum mechanics, statistical mechanics and chemical kinetics, calling on no more than basic college calculus. A conceptual approach and an array of examples and conceptual problems will allow even those without the mathematical tools to grasp much of what is important. Part II (The Tools) covers microscopy, single molecule manipulation and measurement, nanofabrication and self-assembly. Part III (Applications) covers electrons in nanostructures, molecular electronics, nano-materials and nanobiology. Each chapter starts with a survey of the required basics, but ends by making contact with current research literature.
