Download or read book Fabrication and Characterization of Micropits Surface Texture and Microfluidic written by Maryam Alsadat Rad and published by . This book was released on 2013 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Micromachine Microfluidics written by and published by . This book was released on 1999 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of microfluidics is undergoing rapid growth in terms of new device and system development. Among the many methods of fabricating microfluidic devices and systems, surface micromachining is relatively underrepresented due to difficulties in the introduction of fluids into the very small channels produced, packaging problems, and difficulties in device and system characterization. The potential advantages of using surface micromachining including compatibility with the existing integrated circuit tool set, integration of electronic sensing and actuation with microfluidics, and fluid volume minimization. In order to explore these potential advantages we have developed first generation surface micromachined microfluidic devices (channels) using an adapted pressure sensor fabrication process to produce silicon nitride channels, and the SUMMiT process to produce polysilicon channels. The channels were characterized by leak testing and flow rate vs. pressure measurements. The fabrication processes used and results of these tests are reported in this paper.
Download or read book Fabrication and Characterization of a Pulsed MEMS based Micro Flow Sensor for Microfluidic Application written by Nihat Okulan and published by . This book was released on 2000 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Characterization of Bifurcating Microfluidic Networks for Tissue engineered Products with Built in Microvasculature written by Vijayakumar Janakiraman and published by . This book was released on 2008 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of a Microfluidic Device for 3D Cells Analysis written by Simone Benetto and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Assisted Machining written by Lu Zheng and published by John Wiley & Sons. This book was released on 2021-02-16 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to comprehensively address the theory, kinematic modelling, numerical simulation and applications of vibration assisted machining Vibration Assisted Machining: Theory, Modelling and Applications covers all key aspects of vibration assisted machining, including cutting kinematics and dynamics, the effect of workpiece materials and wear of cutting tools. It also addresses practical applications for these techniques. Case studies provide detailed guidance on the design, modeling and testing of VAM systems. Experimental machining methods are also included, alongside considerations of state-of-the-art research developments on cutting force modeling and surface texture generation. Advances in computational modelling, surface metrology and manufacturing science over the past few decades have led to tremendous benefits for industry. This is the first comprehensive book dedicated to design, modelling, simulation and integration of vibration assisted machining system and processes, enabling wider industrial application of the technology. This book enables engineering students and professionals in manufacturing to understand and implement the latest vibration assisted machining techniques. Highlights include: Comprehensive coverage of the theory, kinematics modelling, numerical simulation and applications of vibration assisted machining (VAM) Case studies with detailed guidance on design, modelling and testing of VAM systems, as well as experimental machining methods Discussion of state-of-the-art research developments on cutting force modelling and surface texture generation Coverage of the history of VAM, its current applications and future directions for the technology Vibration Assisted Machining: Theory, Modelling and Applications provides engineering students, researchers, manufacturing engineers, production supervisors, tooling engineers, planning and application engineers and machine tool designers with the fundamentals of vibration assisted machining, along with methodologies for developing and implementing the technology to solve practical industry problems.
Download or read book Molded Optics written by Michael Schaub and published by CRC Press. This book was released on 2016-04-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: While several available texts discuss molded plastic optics, none provide information on all classes of molded optics. Filling this gap, Molded Optics: Design and Manufacture presents detailed descriptions of molded plastic, glass, and infrared optics. Since an understanding of the manufacturing process is necessary to develop cost-effective, produ
Download or read book Micro and Precision Manufacturing written by Kapil Gupta and published by Springer. This book was released on 2017-10-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details on various micro and precision manufacturing and finishing operations performed by conventional and advanced processes, including micro-manufacturing of micro-tools and precision finishing of engineered components. It describes the process mechanism, principles and parameters while performing micro-fabrication and precision finishing operations. The text provides the readers with knowledge of micro and precision manufacturing and encourages them to explore the future venues in this field.
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. - A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques - Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting - Details commercially available hot embossing machinery and components like tools and mold inserts
Download or read book Laser Ablation and Desorption written by and published by Academic Press. This book was released on 1997-12-10 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume introduces the subject of laser ablation and desorption to scientists and engineers. It covers fundamental experimental and theoretical tools, models, and techniques, and introduces the most important applications. Clearly written and organized in a straightforward manner, Laser Ablation and Desorption lead the reader straight through the fundamentals of laser-surface interactions. Each chapter is self-contained and includes references to other chapters as necessary, so that readers may begin with the topic of greatest interest and follow the references to other aspects of the subject contained within the book.Key Features* Provides up-to-date information about one of the most active fields in physics today* Written and edited by major figures in the field of laser ablation and desorption* Represents the most comprehensive treatment of the state-of-the-art available
Download or read book Thermal Machining Processes written by Society of Manufacturing Engineers and published by . This book was released on 1979 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Modification of Biomaterials written by Rui Vilar and published by Woodhead Publishing. This book was released on 2016-04-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Surface Modification of Biomaterials: Techniques and Applications covers this expanding field, which has many potential applications, including biomaterials. Laser surface modification of biomaterials enables the production of hybrid materials with different functionality in the bulk as well as the thin, sub-micrometer surface layer. This book will provide readers with a comprehensive review of the technology and its applications. Chapters in Part 1 look at the techniques and considerations of laser surface modification, while Part 2 reviews laser surface modification techniques of the most important classes of biomaterials, with a final set of chapters discussing application specific laser surface modification. - Offers a comprehensive review of laser surface modification techniques - Presents recent developments, fundamentals, and progress in laser surface modification - Reviews laser surface modification applications across a range of materials - Emphasizes applications in biomaterials
Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.
Download or read book Enabling Technology for MEMS and Nanodevices written by Henry Baltes and published by John Wiley & Sons. This book was released on 2013-03-27 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mikro- und Nanotechnik haben Wissenschaft und Forschung revolutioniert. In Zukunft werden sie auch den Alltag verändern. Nun liegt der erste Band einer neuen Buchreihe vor: Advanced Micro and Nano Systems 1. Henry Baltes und seine Co-Autoren knüpfen mit AMN an die Sensors Update-Reihe an. Das Autorenteam wurde um weitere Experten erweitert. AMN wird zwei Mal pro Jahr mit einem neuen Band die aktuellen Entwicklungen in der Mikro- und Nano-Welt begleiten. Die Erforschung und der Einsatz von Mikro- und Nanosystemen sind eines der brandaktuellen Themen im Wissenschaftsbereich. Die Forschungsergebnisse werden mehr und mehr auch konkret umgesetzt. Damit werden Mikro- und Nanotechnologie zu Wirtschaftsfaktoren. Aktuelle Entwicklungen, neue Technologien, Nano-Bauelemente und Systeme im Mikromaßstab - Advanced Micro and Nano Systems, die neue Buchreihe, wird Spiegel der spannenden und faszinierenden Mikro- und Nano-Welt sein. Zweimal pro Jahr wird es einen neuen AMN-Band geben. Die Autoren sind ausgewiesene Spezialisten. Zu den Herausgebern zählt Henry Baltes, Professor an der ETH Zürich. Er zeichnete bereits für die Bände der Sensors Update-Reihe verantwortlich. Die Artikel ermöglichen Neueinsteigern einen ersten Zugriff auf die Materie. Fachleute erhalten einen umfassenden Überblick. Anspruch der Herausgeber ist es, nicht nur die theoretischen Grundlagen von Mikro- und Nanosystemen zu reflektieren, sondern immer auch praktische Möglichkeiten und die Grenzen der Anwendung im Blick zu haben. Die AMN-Bände sind Handbücher und Nachschlagewerke in einem. Die Reihe richtet sich an Vertreter unterschiedlicher Fachrichtungen: Biologie, Chemie, Mathematik, Sensorindustrie und Materialwissenschaften.
Download or read book Electrical Discharge Machining EDM written by M. P. Jahan and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Discharge Machining (EDM) is one of the earliest and most widely used non-conventional machining processes. In recent years, the use of EDM has increased significantly in industries, mainly due to the extensive use of hard and difficult-to-cut materials, i.e. hardened steels, carbides, titanium alloys, nickel super alloys and so on. The EDM process is being used extensively for many important applications in die and mold, aerospace, automotive, micro-electronic and biomedical industries. As a result, extensive research has been carried out on various aspects of EDM. Taking those facts into consideration, this book aims to provide a comprehensive overview of the various types, technologies and applications of EDM. The book starts with chapters on the two major types of EDM: die-sinking EDM and wire-EDM. Subsequently, several EDM-based hybrid machining processes, such as: ultrasonically aided EDM, powder-mixed EDM, and simultanous micro-EDM/ECM have been discussed in detail. This book includes chapters on the detail of EDM surface and modeling and simulation of the EDM process. This book also contains chapters on the novel and innovative applications of EDM as well as machining of newer materials, such as: shape memory alloy, reaction-bonded silicon carbide, metal metrix composites, silicon based semiconductors, and non-conducting polymers. It is a useful resource for students and researchers who are planning to start their research on the area of EDM and related processes. It can also serve as a reference for students, academics, researchers, engineers, and working professionals in non-traditional manufacturing processes related industries.
Download or read book Electrospinning Nanofabrication and Applications written by Bin Ding and published by William Andrew. This book was released on 2018-11-12 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospinning: Nanofabrication and Applications presents an overview of the electrospinning technique, nanofabrication strategies and potential applications. The book begins with an introduction to the fundamentals of electrospinning, discussing fundamental principles of the electrospinning process, controlling parameters, materials and structures. Nanofabrication strategies, including coaxial electrospinning, multi-needle electrospinning, needleless electrospinning, electro-netting, near-field electrospinning, and three-dimensional macrostructure assembling are also covered. Final sections explore the applications of electrospun nanofibers in different fields and future prospects. This is a valuable reference for engineers and materials scientist working with fibrous materials and textiles, as well as researchers in the areas of nanotechnology, electrospinning, nanofibers and textiles. - Explores controllable fabrication of electrospun nanomaterials and their multifunctional applications - Explains the electrospinning technique as used in nanofabrication and nanofibers - Outlines the applications of electrospun nanofibrous materials in tissue engineering, filtration, oil-water separation, water treatment, food technology, supercapacitors, sensors and so on
Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging
