Download or read book Selected Topics in Nanoscience and Nanotechnology written by Andrew T. S. Wee and published by World Scientific. This book was released on 2009 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected Topics in Nanoscience and Nanotechnology contains a collection of papers in the subfields of scanning probe microscopy, nanofabrication, functional nanoparticles and nanomaterials, molecular engineering and bionanotechnology. Written by experts in their respective fields, it is intended for a general scientific readership who may be non-specialists in these subjects, but who want a reasonably comprehensive introduction to them. This volume is also suitable as resource material for a senior undergraduate or introductory graduate course in nanoscience and nanotechnology.The review articles have been published in journal COSMOS Vol 3 & 4.

Download or read book Ceramic Integration and Joining Technologies written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2011-09-26 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book joins and integrates ceramics and ceramic-based materials in various sectors of technology. A major imperative is to extract scientific information on joining and integration response of real, as well as model, material systems currently in a developmental stage. This book envisions integration in its broadest sense as a fundamental enabling technology at multiple length scales that span the macro, millimeter, micrometer and nanometer ranges. Consequently, the book addresses integration issues in such diverse areas as space power and propulsion, thermoelectric power generation, solar energy, micro-electro-mechanical systems (MEMS), solid oxide fuel cells (SOFC), multi-chip modules, prosthetic devices, and implanted biosensors and stimulators. The engineering challenge of designing and manufacturing complex structural, functional, and smart components and devices for the above applications from smaller, geometrically simpler units requires innovative development of new integration technology and skillful adaptation of existing technology.

Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.

Download or read book Thin Film Shape Memory Alloys written by Shuichi Miyazaki and published by Cambridge University Press. This book was released on 2009-09-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first dedicated book describing the properties, preparation, characterization and device applications of TiNi-based shape memory alloys.

Download or read book Diamond like Carbon Films written by Yuto S. Tanaka and published by Nova Biomedical Books. This book was released on 2012-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research from across the globe in the study of diamond-like carbon films. Topics discussed include the peculiarities of ion-beam synthesis of carbon-based phases; electron field emission properties of non-metal and metal doped diamond like carbon; internal stress and its reduction of hydrogenated diamond-like carbon thin films deposited by plasma CVD methods; incorporating crystalline diamond particles in diamond-like carbon films to improve their properties and diamond-like carbon films applied as an alignment layer for LCDs.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by Bijoy Bhattacharyya and published by Springer Nature. This book was released on 2022-09-12 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design, and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials, and sustainability in manufacturing. The contents of this book are useful for students, researchers, and as well as industry professionals working in the various areas of mechanical engineering.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.

Download or read book Optical Engineering of Diamond written by Rich Mildren and published by John Wiley & Sons. This book was released on 2013-01-14 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book on the engineering of diamond optical devices. Written by 39 experts in the field, it gives readers an up-to-date review of the properties of optical quality synthetic diamond (single crystal and nanodiamond) and the nascent field of diamond optical device engineering. Application areas covered in detail in this book include quantum information processing, high performance lasers and light sources, and bioimaging. It provides scientists, engineers and physicists with a valuable and practical resource for the design and development of diamond-based optical devices.

Download or read book Modern Tribology Handbook Two Volume Set written by Bharat Bhushan and published by CRC Press. This book was released on 2000-12-28 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent research has led to a deeper understanding of the nature and consequences of interactions between materials on an atomic scale. The results have resonated throughout the field of tribology. For example, new applications require detailed understanding of the tribological process on macro- and microscales and new knowledge guides the rational

Download or read book Atomic Force Microscopy Scanning Nearfield Optical Microscopy and Nanoscratching written by Gerd Kaupp and published by Springer Science & Business Media. This book was released on 2006-10-24 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Making a clear distinction is made between nano- and micro-mechanical testing for physical reasons, this monograph describes the basics and applications of the supermicroscopies AFM and SNOM, and of the nanomechanical testing on rough and technical natural surfaces in the submicron range down to a lateral resolution of a few nm. New or improved instrumentation, new physical laws and unforeseen new applications in all branches of natural sciences (around physics, chemistry, mineralogy, materials science, biology and medicine) and nanotechnology are covered as well as the sources for pitfalls and errors. It outlines the handling of natural and technical samples in relation to those of flat standard samples and emphasizes new special features. Pitfalls and sources of errors are clearly demonstrated as well as their efficient remedy when going from molecularly flat to rough surfaces. The academic or industrial scientist learns how to apply the principles for tackling their scientific or manufacturing tasks that include roughness far away from standard samples.

Download or read book Carbon Based Electronic Devices written by Alberto Tagliaferro and published by MDPI. This book was released on 2020-02-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 50 years, silicon has dominated the electronics industry. However, this growth will come to an end, due to resources limitations. Thus, research developments need to focus to alternative materials, with higher performance and better functionality. Current research achievements have indicated that carbon is one of the promising candidates for its exploitation in the electronics industry. Whereas the physical properties of graphite and diamond have been investigated for many years, the potential for electronic applications of other allotropes of carbon (fullerenes, carbon nanotubes, carbon nanofibres, carbon films, carbon balls and beads, carbon fibers, etc), has only been appreciated relatively recently. Carbon-based materials offer a number of exciting possibilities for new applications of electronic devices, due to their unique thermal and electrical properties. However, the success of carbon-based electronics depends on the rapid progress of the fabrication, doping and manipulation techniques. In this Special Issue, we focus on both insights and advancements in carbon-based electronics. We will also cover various topics ranging from synthesis, functionalisation, and characterisation of carbon-based materials, for their use in electronic devices, including advanced manufacturing techniques, such as 3D printing, ink-jet printing, spray-gun technique, etc.

Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.

Download or read book Energy Materials Coordinating Committe EMaCC Fiscal Year 2001 Annual Technical Report written by and published by DIANE Publishing. This book was released on with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Handbook of Less Common Nanostructures written by Boris I. Kharisov and published by CRC Press. This book was released on 2012-03-19 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nanotechnology has developed over the last two decades, some nanostructures, such as nanotubes, nanowires, and nanoparticles, have become very popular. However, recent research has led to the discovery of other, less-common nanoforms, which often serve as building blocks for more complex structures. In an effort to organize the field, the Handbook of Less-Common Nanostructures presents an informal classification based mainly on the less-common nanostructures. A small nanotechnological encyclopedia, this book: Describes a range of little-known nanostructures Offers a unifying vision of the synthesis of nanostructures and the generalization of rare nanoforms Includes downloadable resources with color versions of more than 100 nanostructures Explores the fabrication of rare nanostructures, including modern physical, chemical, and biological synthesis techniques The Handbook of Less-Common Nanostructures discusses a classification system not directly related to the dimensionality and chemical composition of nanostructure-forming compounds or composite. Instead, it is based mainly on the less-common nanostructures. Possessing unusual shapes and high surface areas, these structures are potentially very useful for catalytic, medical, electronic, and many other applications.