Download or read book Fabrication and Characterization of a Pulsed MEMS based Micro Flow Sensor for Microfluidic Application written by Nihat Okulan and published by . This book was released on 2000 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microfluidic Biosensors written by Wing Cheung Mak and published by Elsevier. This book was released on 2022-11-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidic Biosensors provides a comprehensive overview covering the most recent emerging technologies on the design, fabrication, and integration of microfluidics with transducers. These form various integrated microfluidic biosensors with device configurations ranging from 2D to 4D levels. Coverage also includes advanced printed microfluidic biosensors, flexible microfluidics for wearable biosensors, autonomous lab-on-a-chip biosensors, CMOS-base microanalysis systems, and microfluidic devices for mobile phone biosensing. The editors and contributors of this book represent both academia and industry, come from a varied range of backgrounds, and offer a global perspective. This book discusses the design and principle of microfluidic systems and uses them for biosensing applications. The microfluidic fabrication technologies covered in this book provide an up-to-date view, allowing the community to think of new ways to overcome challenges faced in this field. The focus is on existing and emerging technologies not currently being analyzed extensively elsewhere, providing a unique perspective and much-needed content. The editors have crafted this book to be accessible to all levels of academics from graduate students, researchers, and professors working in the fields of biosensors, microfluidics design, material science, analytical chemistry, biomedical devices, and biomedical engineering. It can also be useful for industry professionals working for microfluidic device manufacturers, or in the industry of biosensors and biomedical devices. - Presents an in-depth overview of microfluidic biosensors and associated emerging technologies such as printed microfluidics and novel transducers - Addresses a range of microfluidic biosensors with device configurations ranging from 2D to 4D levels - Includes the commercialization aspects of microfluidic biosensors that provide insights for scientists and engineers in research and development
Download or read book MEMS Based Devices for Drug Delivery written by A. Nisar and published by LAP Lambert Academic Publishing. This book was released on 2011 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book briefly overviews progress on development of MEMS based microfluidic devices such as micropumps, microneedles, micromixers and micro flow cytometers for biomedical applications. Design, analysis and fabrication of MEMS based piezoelectrically actuated polymeric valveless micropumps is also presented. The book provides a valuable reference for researchers working on design and development of MEMS-based microfluidic devices for biomedical applications.
Download or read book MEMS and Microfluidics in Healthcare written by Koushik Guha and published by Springer Nature. This book was released on 2023-03-13 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the research significance of biomedical instrumentation and discusses micro-fabrication techniques utilized for biomedical devices. This book primarily focuses on the reader enlightenment on MEMS medical devices by introducing all the diagnostic devices and treatment tools at one place. The book covers in-depth technical works and general introductions to the devices such that the book can reach technical as well as non-technical readers.
Download or read book Microfluidic Devices for Biomedical Applications written by Xiujun James Li and published by Woodhead Publishing. This book was released on 2013-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics or lab-on-a-chip (LOC) is an important technology suitable for numerous applications from drug delivery to tissue engineering. Microfluidic devices for biomedical applications discusses the fundamentals of microfluidics and explores in detail a wide range of medical applications. The first part of the book reviews the fundamentals of microfluidic technologies for biomedical applications with chapters focussing on the materials and methods for microfabrication, microfluidic actuation mechanisms and digital microfluidic technologies. Chapters in part two examine applications in drug discovery and controlled-delivery including micro needles. Part three considers applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and their role in developing tissue scaffolds and stem cell engineering. The final part of the book covers the applications of microfluidic devices in diagnostic sensing, including genetic analysis, low-cost bioassays, viral detection, and radio chemical synthesis. Microfluidic devices for biomedical applications is an essential reference for medical device manufacturers, scientists and researchers concerned with microfluidics in the field of biomedical applications and life-science industries.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2002 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microfabrication of a MEMS Piezoresistive Flow Sensor Materials and Processes written by Avishek R. Aiyar and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) based artificial sensory hairs for flow sensing have been widely explored, but the processes involved in their fabrication are lithography intensive, making the process quite expensive and cumbersome. Most of these devices are also based on silicon MEMS, which makes the fabrication of out-of plane 3D flow sensors very challenging. This thesis aims to develop new fabrication technologies based on Polymer MEMS, with minimum dependence on lithography for the fabrication of piezoresistive 3D out-of-plane artificial sensory hairs for sensing of air flow. Moreover, the fabrication of a flexible sensor array is proposed and new materials are also explored for the sensing application.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. - Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field - Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms - Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Microfluidic Technologies for Miniaturized Analysis Systems written by Steffen Hardt and published by Springer Science & Business Media. This book was released on 2007-09-29 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses Lab-on-a-Chip devices. It focuses on microfluidic technologies that have emerged in the past decade. Coverage presents a comprehensive listing of the most promising microfluidic technologies in the Lab-on-a-Chip field. It also details technologies that can be viewed as toolboxes needed to set up complex Lab-on-a-Chip systems.
Download or read book Optical Feedback Sensing in Microfluidics written by Yu Zhao and published by . This book was released on 2017 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical feedback interferometry (OFI) is an emerging sensing technique which has been studied in fluidic systems. This sensing scheme is based on the modulation of the laser emission output power and/or the junction voltage induced by the interaction between the back-scattered light from a distant target and the laser inner cavity light. Thanks to the Doppler Effect, OFI can precisely measure the velocity of seeding particles in flowing liquids which is much required in chemical engineering and biomedical fields. In the present thesis, optical feedback interferometry performance for microscale flow sensing is studied theoretically and experimentally. A new numerical modeling approach based on multi-physics numerical simulations for OFI signal simulation in the micro-scale flowmetry configuration is presented that highlight the sensor performances. In this model, many factors are involved such as particle concentration and laser-particle scattering angle distribution and flow velocity distribution. The flow rate measurement shows good agreement with the modeling. The implementation of OFI based sensors in multiple fluidic systems, investigating the impact of the fluidic chip specific configuration on the sensor signal.Finally, a compact OFI flowmetry sensor based on Vertical-Cavity Surface-Emitting Lasers (VCSELs) using micro optical fabrication techniques is demonstrated as well. The simulation method for the design and the microfabrication procedures are detailed. After an evaluation of the experimental results, the capabilities of this new OFI sensor in microfluidic measurements are emphasized, thus demonstrating an open path towards ultra-compact microfluidic systems based on the OFI sensing technique.
Download or read book Advances in MEMS and Microfluidic Systems written by Rakesh Kumar Phanden and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in MEMS and Microfluidic Systems explores the emerging research and advances in MEMS device and microfluidic systems applications. It features in-depth chapters on microfluidic device design and fabrication as well as on the aspects of devices/systems, characterization, and comparative research findings. Covering topics such as biosensors, lab-on-a-chip, and microfluidic technology, this premier reference source is an indispensable resource for engineers, health professionals, students and educators of higher education, librarians, researchers, and academicians"--
Download or read book SEIA 2019 Conference Proceedings written by Sergey Yurish and published by Lulu.com. This book was released on 2020-01-13 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 5th International Conference on Sensors and Electronic Instrumentation Advances SEIA' 2019), 25-27 September 2019, Tenerife (Canary Islands), Spain. The coverage includes: various physical sensors, gas sensors, optical and fiber optical sensors and systems, biosensors, sensors networks and applications.
Download or read book Design and Fabrication of a Microfluidic Flowrate Temperature Sensor written by Justin McKennon and published by LAP Lambert Academic Publishing. This book was released on 2014-03 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of microfluidics has been an emerging area of popular research in the fields of science and engineering since it first emerged in the early 1980s. Residing at the intersection of engineering, chemistry, physics, and biology, microfluidics problems have posed some of the greatest challenges of science in recent times. Due to the extreme difficulty in manipulating, measuring, and controlling the fluid volumes and velocities associated with microfluidics applications, many significant scientific advances have been held out of reach. Of the all the bottlenecks associated with microfluidics, the accurate measurement and characterization of fluids in these systems has proven to be one of the most challenging. Sensors in this category are constrained to geometrically minute spaces, typically on the sub-millimeter scale, making conventional measurement techniques obsolete for many applications. This book discusses the analysis and fabrication techniques associated with designing, building, and testing a microfluidic flow rate and temperature sensor.
Download or read book Fabrication and Characterization of Micropits Surface Texture and Microfluidic written by Maryam Alsadat Rad and published by . This book was released on 2013 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Characterization of Bulk type MEMS High Pressure Sensor written by Elena Yin Ling Chan and published by . This book was released on 2018 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Micromachined Microfluidic Channels and Tunable Microwave Inductors written by Thomas P. Ketterl and published by . This book was released on 2000 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
