Download or read book Fabrication and Characterisation of Three dimensional Passive and Active Photonic Crystals written by Michael James Ventura and published by . This book was released on 2008 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Photonic Crystals written by Kurt Busch and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of the contributions in this topically edited book stems from the priority program SPP 1113 "Photonische Kristalle" run by the Deutsche Forschungsgemeinschaft (DFG), resulting in a survey of the current state of photonic crystal research in Germany. The first part of the book describes methods for the theoretical analysis of their optical properties as well as the results. The main part is dedicated to the fabrication, characterization and modeling of two- and three-dimensional photonic crystals, while the final section presents a wide spectrum of applications: gas sensors, micro-lasers, and photonic crystal fibers. Illustrated in full color, this book is not only of interest to advanced students and researchers in physics, electrical engineering, and material science, but also to company R&D departments involved in photonic crystal-related technological developments.

Download or read book Design Fabrication and Characterization of Three dimensional Photonic Crystals written by Lifeng Chen and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Fabrication and Characterization of Three dimensional Chiral Photonic Crystals written by Michael Thiel and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Three dimensional Photonic Crystals Via Direct Laser Writing written by Markus Deubel and published by . This book was released on 2006 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication and Characterization of Three dimensional Infrarer Photonic Crystals written by Lisa Zavieh and published by . This book was released on 1999 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication and Characterization of Three Dimensional Photonic Crystals Generated by Multibeam Interference Lithography written by Ying-Chieh Chen and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibeam interference lithography is investigated as a manufacturing technique for three-dimensional photonic crystal templates. In this research, optimization of the optical setup and the photoresist initiation system leads to a significant improvement of the optical quality of the crystal, as characterized by normal incidence optical spectroscopy. Theoretical spectra are calculated and demonstrate close agreement with experimental values, indicating that this fabrication process achieves excellent optical quality. X-ray microscopy provides non-destructive inspection of the fabricated crystals at nano-scale resolution. A reconstructed crystal model is generated by computed tomography which allows for comparison to a predicted structure's geometry and optical spectra. Using the polymer crystal as a template, electrodeposition is performed to completely infiltrate the crystal with Cu2O. After polymer removal the inverted Cu2O crystal exhibits a high peak reflectance at the predicted wavelength, indicating the structure is an exact inverse of the template. A conformal growth algorithm is developed for the commonly used chemical vapor deposition infiltration technique to explain growth results and verified experimentally with atomic layer deposition of oxide materials. Finally, a customized chemically amplified positive photoresist system and its processing steps are developed as a route to zero-shrinkage template material for high fidelity patterning of the designed interference patterns.

Download or read book Fabrication and Characterization of Three Dimensional Photonic Crystals Generated by Multibeam Interference Lithography written by Ying-Chieh Chen and published by . This book was released on 2009 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibeam interference lithography is investigated as a manufacturing technique for three-dimensional photonic crystal templates. In this research, optimization of the optical setup and the photoresist initiation system leads to a significant improvement of the optical quality of the crystal, as characterized by normal incidence optical spectroscopy. Theoretical spectra are calculated and demonstrate close agreement with experimental values, indicating that this fabrication process achieves excellent optical quality. X-ray microscopy provides non-destructive inspection of the fabricated crystals at nano-scale resolution. A reconstructed crystal model is generated by computed tomography which allows for comparison to a predicted structure's geometry and optical spectra. Using the polymer crystal as a template, electrodeposition is performed to completely infiltrate the crystal with Cu2O. After polymer removal the inverted Cu2O crystal exhibits a high peak reflectance at the predicted wavelength, indicating the structure is an exact inverse of the template. A conformal growth algorithm is developed for the commonly used chemical vapor deposition infiltration technique to explain growth results and verified experimentally with atomic layer deposition of oxide materials. Finally, a customized chemically amplified positive photoresist system and its processing steps are developed as a route to zero-shrinkage template material for high fidelity patterning of the designed interference patterns.

Download or read book Design Fabrication and Characterisation of Silicon Based One Dimensional Photonic Crystal Structures written by Siobhán Margaret O'Neill and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Photonic Crystals Physics and Technology written by Concita Sibilia and published by Springer. This book was released on 2008-09-18 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the work is give an overview of the activity in the field of Photonic Crystal developed in the frame of COST P11 action . The main objective of the COST P11 action was to unify and coordinate national efforts aimed at studying linear and nonlinear optical interactions with Photonic Crystals (PCs), without neglecting an important aspect related to the material research as idea and methods of realizations of 3D PC, together with the development and implementation of measurement techniques for the experimental evaluation of their potential applications in different area, as for example telecommunication with novel optical fibers, lasers, nonlinear multi-functionality, display devices, opto-electronics, sensors. The book contains contributions from authors who gave their lecture at the Cost P11 Training School.

Download or read book Design Fabrication and Characterization of One Dimensional Photonic Crystal Devices written by Xiaohua Shi and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Simulation and Physical Characterization of 3D Photonic Crystal Woodpile Structures for High Efficacy Incandescent Thermal Emission written by Supriya Lalapet Sridhar and published by . This book was released on 2008 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic crystals are widely recognized for their light extraction properties paving a way for extensive use in optical communication and many other fields where there is a need for manipulation and control of light and its properties. Though one dimensional photonic crystal in the form of diffraction gratings and two dimensional photonic crystals are widely used in various optics applications, recent work in three dimensional photonic crystals is allowing their use as thermal emitters. Previous work done on three dimensional photonic crystals with various fabrication techniques have enabled thermal emission but beyond the visible wavelength region. The basis of this thesis dissertation is to lay the foundation for the use of photonic crystals as Thermal emitters within the visible wavelength region leading to enhanced emission which could in the future be an ideal replacement for other optical sources. This work presents the Design, simulation and Physical characterization of Tungsten photonic crystal filaments for enhanced black body emission. The major focus area is the simulation of the Crystal structure using the software FDTD Solutions to obtain the accurate dimensions for the fabrication of the structure. The initial steps of the fabrication process were then carried out with emphasis on Thermocompression bonding to obtain the first layer of the woodpile structure. Several strength measurements were carried out to emphasize the Bond strength characterization and the first layer of the overall structure was successfully obtained. The crux of this work is mainly simulation and Initial fabrication process mainly comprising of Thermocompression bonding and characterization following the bonding.

Download or read book Fabrication and Characterization of 3 D Photonic Crystals of Various Microspheres by Electrophoretic Self Assembly written by and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Characteristics of Two dimensional Triangular and Three dimensional Face centered cubic Photonic Crystals written by Jeffrey Dustin Clark and published by . This book was released on 2006 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fabrication of Three dimensional Photonic Crystals Via Direct Laser Writing in an All inorganic Photoresist written by Sean Hang Edmond Wong and published by . This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Photonic Crystals written by Jean-Michel Lourtioz and published by Springer Science & Business Media. This book was released on 2005 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just like the periodical crystalline potential in solid-state crystals determines their properties for the conduction of electrons, the periodical structuring of photonic crystals leads to envisioning the possibility of achieving a control of the photon flux in dielectric and metallic materials. The use of photonic crystals as a cage for storing, filtering or guiding light at the wavelength scale thus paves the way to the realisation of optical and optoelectronic devices with ultimate properties and dimensions. This should contribute toward meeting the demands for a greater miniaturisation that the processing of an ever increasing number of data requires. Photonic Crystals intends to provide students and researchers from different fields with the theoretical background needed for modelling photonic crystals and their optical properties, while at the same time presenting the large variety of devices, from optics to microwaves, where photonic crystals have found applications. As such, it aims at building bridges between optics, electromagnetism and solid-state physics. This book was written by six specialists of nanophotonics, and was coordinated by Jean-Michel Lourtioz, head of the Institut d'A0/00lectronique Fondamentale in Orsay and coordinator of the French Research Network in Nanophotonics.

Download or read book Photonic Crystals Theory Applications and Fabrication written by Dennis W Prather and published by John Wiley & Sons. This book was released on 2009-05-26 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Only Source You Need for Understanding the Design and Applications of Photonic Crystal-Based Devices This book presents in detail the fundamental theoretical background necessary to understand the unique optical phenomena arising from the crystalline nature of photonic-crystal structures and their application across a range of disciplines. Organized to take readers from basic concepts to more advanced topics, the book covers: Preliminary concepts of electromagnetic waves and periodic media Numerical methods for analyzing photonic-crystal structures Devices and applications based on photonic bandgaps Engineering photonic-crystal dispersion properties Fabrication of two- and three-dimensional photonic crystals The authors assume an elementary knowledge of electromagnetism, vector calculus, Fourier analysis, and complex number analysis. Therefore, the book is appropriate for advanced undergraduate students in physics, applied physics, optics, electronics, and chemical and electrical engineering, as well as graduate students and researchers in these fields.