Download or read book Fabrication and Application of Advanced Functional Materials from Lignincellulosic Biomass written by Sixiao Hu and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation explored the conversion of lignocellulosic biomass into advanced functional materials and their potential applications. Lignocellulosic biomass represents an as-of-yet underutilized renewable source for not only biofuel production but also functional materials fabrication. This renewable source is a great alternative for fossile fuel based chemicals, which could be one of the solutions to energy crisis. In this work, it was demonstrated a variety of advanced materials including functional carbons, metal and silica nanoparticles could be derived from lignocellulosic biomass. Chapter 1 provided overall reviewed of the lignin structures, productions and its utilizations as plastics, absorbents and carbons, as well as the preparation of nano-structured silver, silica and silicon carbide/nitride from biomass. Chapter 2, 3 and 4 discussed the fabrication of highly porous carbons from isolated lignin, and their applications as electric supercapacitors for energy storage. In chapter 2, ultrafine porous carbon fibers were prepared via electrospinning followed by simultaneous carbonization and activation. Chapter 3 covered the fabrication of supercapacitor based on the porous carbon fibers and the investigation of their electrochemical performances. In chapter 4, porous carbon particulates with layered carbon nano plates structures were produced by simple oven-drying followed by simultaneous carbonization and activation. The effects of heat processing parameters on the resulting carbon structures and their electrochemical properties were discussed in details. Chapter 5 and 6 addressed the preparation of silver nanoparticles using lignin. Chapter 5 reported the synthesis, underlying kinetics and mechanism of monodispersed silver nanospheres with diameter less than 25 nm in aqueous solutions using lignin as dual reducing and capping agents. Chapter 6 covered the preparation of silver nanoparticles on electrospun celluloses ultrafine fibers using lignin as both binding and reducing agents. The efficiency of this synthetic protocol and the properties of resulting particles were examined. Chapter 7 reported the streamlined extraction of lignin/hemicelluloses and silica from rice straw and their subsequent conversion to activated carbon and monodispersed silica particles.

Download or read book Lignocellulosics written by Ilari Filpponen and published by Elsevier. This book was released on 2020-03-14 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosics: Renewable Feedstock for (Tailored) Functional Materials and Nanotechnology gives a comprehensive overview of recent advances in using lignocellulosic substrates in materials science and nanotechnology. The functionalization and processing of lignocellulosics are described via a number of examples that cover films, gels, sensors, pharmaceutics and energy storage. In addition to the research related to functional cellulose nanomaterials, there has been an increased interest in research on lignin and lignocellulosics. This book explains how utilizing biomaterials as a raw material allows ambitious reconstruction of smart materials that are green and multifunctional. As lignin as a valuable material has gained a lot of attention in the last few years, shifting from purely extraction and fundamental characterization, and now also focusing on the preparation of exciting materials, such as nanoparticles, readers will find this to be a comprehensive resource on the topic. - Provides a detailed description of functional lignocellulosic materials and their properties - Brings together research advances in the areas of chemistry, chemical engineering, physics and materials science - Concentrates on the fundamental properties of lignocellulose - Includes unique coverage of lignin research

Download or read book Functional Materials From Lignin Methods And Advances written by Xian Jun Loh and published by World Scientific Publishing. This book was released on 2018-06-08 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin is one of the most abundant plant-derived feedstock on earth and qualifies as a renewable material. However, lignin is widely recognized as waste byproduct of the cellulosic ethanol and pulp and paper industry. How to properly modify lignin and develop it into functional polymers is a huge challenge, but an attractive research topic in both industry and academia.This book brings together leading engineering approaches to address the challenges of lignin valorization. It presents the chemistry and properties of different types of lignin, and explores the cutting-edge approaches of lignin modifications. Unlike any existing texts, this book not only summarizes the traditional ways of using lignin, but also presents various potential applications of lignin materials together with advanced processing techniques.The basis of lignin (its chemistry, types and properties) is described, as are different approaches to modify it. The features of lignin and its copolymers are explored and aligned with their potential applications. In addition to the carbon materials from lignin, the advanced fabrication approaches to engineer lignin-based micro/nano-structural materials are summarized.

Download or read book Production of Materials from Sustainable Biomass Resources written by Zhen Fang and published by Springer. This book was released on 2019-04-04 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of studies on state-of-art techniques developed specifically for lignocellulose component derivation, and for the production of functional materials, composite polymers, carbonaceous biocatalysts, and pellets from lignocellulosic biomass, with an emphasis on using sustainable chemistry and engineering to develop innovative materials and fuels for practical application. Technological strategies for the physical processing or biological conversion of biomass for material production are also presented. All chapters were contributed by respected experts in the field from around the globe, providing a broad range of perspectives on cutting-edge applications. The book offers an ideal reference guide for academic researchers and industrial engineers in the fields of natural renewable materials, biorefinery of lignocellulose, biofuels and environmental engineering. It can also be used as a comprehensive reference source for university students in chemical engineering, material science and environmental engineering.

Download or read book Lignin based Materials for Biomedical Applications written by Patrícia Figueiredo and published by Elsevier. This book was released on 2021-07-26 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignin-based Materials for Biomedical Applications: Preparation, Characterization, and Implementation explores the emerging area of lignin-based materials as a platform for advanced biomedical applications, guiding the reader from source through to implementation. The first part of the book introduces the basics of lignin, including extraction methods, chemical modifications, structure and composition, and properties that make lignin suitable for biomedical applications. In addition, structural characterization techniques are described in detail. The next chapters focus on the preparation of lignin-based materials for biomedical applications, presenting methodologies for lignin-based nanoparticles, hydrogels, aerogels, and nanofibers, and providing in-depth coverage of lignin-based materials with specific properties—including antioxidant properties, UV absorbing capability, antimicrobial properties, and colloidal particles with tailored properties—and applications, such as drug and gene delivery, and tissue engineering. Finally, future perspectives and possible new applications are considered. This is an essential reference for all those with an interest in lignin-based materials and their biomedical applications, including researchers and advanced students across bio-based polymers, polymer science, polymer chemistry, biomaterials, nanotechnology, materials science and engineering, drug delivery, and biomedical engineering, as well as industrial R&D and scientists involved with bio-based polymers, specifically for biomedical applications. - Unlocks the potential of lignin-based materials with advanced properties for cutting-edge applications in areas such as drug delivery, gene delivery and tissue engineering - Presents state-of-the-art methodologies used in the development of lignin-based nanoparticles, hydrogels, aerogels and nanofibers - Explains the fundamentals of lignin, including structure and composition, extraction and isolation methods, types and properties, chemical modifications, and characterization techniques

Download or read book From Biomass to Advanced Bio Based Chemicals Materials A Multidisciplinary Perspective written by Gabriel Paës and published by Frontiers Media SA. This book was released on 2020-04-01 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulose is the only renewable carbon source that can help replace oil-based chemicals and materials, in the process fighting global warming. However, because of its chemical and structural complexity, lignocellulose transformation into advanced products requires a better understanding of its composition and of its architecture at different scales, as well as a combination of physical, biological, and chemical processes, in order to render this transformation efficient and economically competitive. Tremendous efforts continue to be made toward the production of ethanol as a biofuel from various lignocellulosic feedstocks. Furthermore, recent successes have been achieved in extracting fibers to prepare composite materials that can compete with plastic fabrics. Importantly, lignocellulose chemistry can bring to the market original and complex chemicals that can lead to new applications, in particular when exploiting aromatic molecules or oligosaccharides from lignocellulose to produce solvents, surfactants, plasticizers, functional additives for food/feed/cosmetics, drugs, monomers, and polymers. In addition to this broad range of molecular products, fibers and particles fractionated from the lignocellulosic biomass are increasingly used to elaborate bio-based composite materials.

Download or read book Production of Materials from Sustainable Biomass Resources written by Zhen Fang and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of studies on state-of-art techniques developed specifically for lignocellulose component derivation, and for the production of functional materials, composite polymers, carbonaceous biocatalysts, and pellets from lignocellulosic biomass, with an emphasis on using sustainable chemistry and engineering to develop innovative materials and fuels for practical application. Technological strategies for the physical processing or biological conversion of biomass for material production are also presented. All chapters were contributed by respected experts in the field from around the globe, providing a broad range of perspectives on cutting-edge applications. The book offers an ideal reference guide for academic researchers and industrial engineers in the fields of natural renewable materials, biorefinery of lignocellulose, biofuels and environmental engineering. It can also be used as a comprehensive reference source for university students in chemical engineering, material science and environmental engineering.

Download or read book Fabrication and Applications of Biomass Derived Porous Carbon written by Kai Yan and published by CRC Press. This book was released on 2024-11-05 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the fundamentals, preparation technology, state-of-the-art applications, and future development of biomass-derived porous carbon materials. The authors provide a theoretical foundation that demonstrates the microstructure and physicochemical properties of carbon materials. The fabrication methods, including physical activation methods, chemical activation methods, and advances in other new fabrication methods are explicitly described. The book also identifies many potential applications of biomass (especially biomass-derived porous carbon materials), such as supercapacitors, removal of organic pollutants from water, CO2 capture, photocatalytic application, and farmland restoration. The book will be a valuable resource for researchers, scientists, and engineers working in the field of biomass-derived porous carbon materials, carbon resource development, and environmental protection.

Download or read book Lignocellulose for Future Bioeconomy written by Hidayah Ariffin and published by Elsevier. This book was released on 2019-04-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulose for Future Bioeconomy discusses the conversion and utilization of lignocellulosic biomass. This book focuses on the utilization of lignocelluloses for various products, including biopolymers, bionanomaterials and bioproducts. Recent findings in scientific investigation, engineering, product development, economic and lifecycle analysis are discussed, as are current synthesis technologies and potential applications. The book progresses from a discussion of the potential sources of biomass, to the refinement and processing of materials. A sampling of various sustainability issues faced by industries in their production methods and a look at real world examples of the use of lignocellulose-based materials in the bioeconomy round out the discussion. - Presents information on lignocellulosic biomass management and its utilization for the production of bioproducts, biopolymers and bionanomaterials - Highlights the applications of advanced materials developed from lignocellulosic biomass and their contribution towards future bioeconomy - Discusses the lifecycle of lignocellulosic biomass

Download or read book Handbook of Advanced Biomass Materials for Environmental Remediation written by Sabu Thomas and published by Springer Nature. This book was released on with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lignocellulosic Fibre and Biomass Based Composite Materials written by Mohammad Jawaid and published by Woodhead Publishing. This book was released on 2017-06-03 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lignocellulosic Fibre and Biomass-Based Composite Materials reviews the development, characterization and applications of composite materials developed from the effective use of lignocellulosic fibre and biomass. The book gathers together a wide spectrum of cutting-edge research on biomass fillers and reinforcements used for the fabrication and synthesis of composites. The book takes a systematic approach, investigating processing, design, characterization and applications of biocomposites, in order to establish their important relationship as a general guideline for end-user applications. Beginning with an introduction to biomass and its composites, a team of leading experts in the field cover rice husk, kenaf, oil palm, alfa and doum fibres, bamboo, cork, and many other materials, considering a range of applications, along with key issues such as performance and sustainability. The groundbreaking research presented opens the door to obtaining advanced material characteristics and significant enhancements in physical, mechanical, and thermal properties. This will be become an extremely useful reference and technical guide for academic and industrial researchers in composite materials, as well as for advanced students and industrialists working in material commercialization. - Gathers together a wide spectrum of research on lignocellulosic fiber and biomass fillers and reinforcements used for the fabrication and synthesis of composites - Presents multidisciplinary work in relation to materials engineering, polymer chemistry and physics, materials processing, organic synthesis and industrial design and applications - Demonstrates systematic approaches and investigations from processing, design, characterization and applications of biocomposites

Download or read book Advanced Functional Textiles and Polymers written by Shahid Ul-Islam and published by John Wiley & Sons. This book was released on 2019-11-12 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on advanced functional textiles and polymers will offer a comprehensive view of cutting-edge research in newly discovered areas such as flame retardant textiles, antimicrobial textiles, insect repellent textiles, aroma textiles, medical-textiles, smart textiles, and nano-textiles etc. The second part the book provides innovative fabrication strategies, unique methodologies and overview of latest novel agents employed in the research and development of functional polymers.

Download or read book Carbon Based Materials and Environmental Remediation Graphene Biochar and More written by Nirmala, N. and published by IGI Global. This book was released on 2024-08-28 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-based materials have emerged as versatile and effective solutions in environmental remediation. These materials possess exceptional adsorption properties that enable them to capture and remove a wide range of pollutants from air and water. Their high surface area, porosity, and stability make them ideal for tackling contaminants such as heavy metals, organic compounds, and pesticides. By leveraging these unique properties, carbon-based materials play a crucial role in mitigating environmental pollution and promoting sustainable practices. Carbon-Based Materials and Environmental Remediation: Graphene, Biochar, and More explores the applications of carbon-based materials such as graphene, biochar, and more for environmental remediation. This book delves into the unique properties and mechanisms that make these materials effective in addressing various environmental challenges. Covering topics such as carbon nanomaterials, pesticide remediation, and water pollution control, this book is an essential resource for environmental scientists, chemical engineers, materials scientists, academic researchers, graduate and postgraduate students, and more.

Download or read book Advanced Materials and Manufacturing Techniques for Biomedical Applications written by Arbind Prasad and published by John Wiley & Sons. This book was released on 2023-12-12 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADVANCED MATERIALS and MANUFACTURING TECHNIQUES for BIOMEDICAL APPLICATIONS The book provides essential knowledge for the synthesis of biomedical products, development, nanomaterial properties, fabrication processes, and design techniques for different applications, as well as process design and optimization. In origin, biomaterials can come from nature or be synthesized in the laboratory with a variety of approaches that use metals, polymers, ceramic, or composite materials. They are often used or adapted for various biomedical applications. Biomaterials are commonly used in scaffolds, orthopedic, wound healing, fracture fixation, surgical sutures, artificial organ developments, pins and screws to stabilize fractures, surgical mesh, breast implants, artificial ligaments and tendons, and drug delivery systems. The sixteen chapters in Advanced Materials and Manufacturing Techniques in Biomedical Applications cover the synthesis, processing, design, manufacturing, and characterization of advanced materials; self-healing, bioinspired, nature-resourced, nanobiomaterials for biomedical applications; and manufacturing techniques such as rapid prototyping, additive manufacturing, etc. Audience The book is for engineers, technologists, and researchers working in the area of biomedical engineering and manufacturing techniques. It is also appropriate for upper-level undergraduate and graduate students.

Download or read book Lignocellulosic Biorefining Technologies written by Avinash P. Ingle and published by John Wiley & Sons. This book was released on 2020-01-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text to the advances and development of novel technologies in the production of high-value products from economically viable raw materials Lignocellulosic Biorefining Technologiesis an essential guide to the most recent advances and developments of novel technologies in the production of various high-value products from economically viable raw materials. Written by a team of experts on the topic, the book covers important topics specifically on production of economical and sustainable products such as various biofuels, organic acids, enzymes, biopigments, biosurfactants, etc. The book highlights the important aspects of lignocellulosic biorefining including structure, function, and chemical composition of the plant cell wall and reviews the details about the various components present in the lignocellulosic biomass and their characterizations. The authors explore the various approaches available for processing lignocellulosic biomass into second generation sugars and focus on the possibilities of utilization of lignocellulosic feedstocks for the production of biofuels and biochemicals. Each chapter includes a range of clear, informative tables and figures, and contains relevant references of published articles. This important text: Provides cutting-edge information on the recent developments in lignocellulose biorefinery Reviews production of various economically important and sustainable products, such as biofuels, organic acids, biopigments, and biosurfactants Highlights several broad-ranging areas of recent advances in the utilization of a variety of lignocellulosic feedstocks Provides a valuable, authoritative reference for anyone interested in the topic Written for post-graduate students and researchers in disciplines such as biotechnology, bioengineering, forestry, agriculture, and chemical industry, Lignocellulosic Biorefining Technologies is an authoritative and updated guide to the knowledge about various biorefining technologies.

Download or read book Polymer Based Advanced Functional Materials for Energy and Environmental Applications written by Nithin Kundachira Subramani and published by Springer Nature. This book was released on 2022-01-01 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer-based advanced functional materials are one of most sought after products of this global high performance material demand as polymer-based materials guarantee both processing ease and mechanical flexibilities. This volume provides a comprehensive and updated review of major innovations in the field of polymer-based advanced functional materials which focuses on constructive knowledge on advanced multifunctional materials and their resultant techno-commercial applications. The contents aim at restricting the coverage to energy and environment related applications as the said two are the most emerging application domains of polymer-based advanced functional materials. It highlights the cutting-edge and recent research findings of polymer based advanced functional materials in energy and environment sectors wherein each chapter focuses on a specific energy and environment related application of polymer-based advanced functional materials, their preparation technique, nature enhancement achieved and allied factors. This volume would be of great interest to researchers, academicians and professionals, involved in polymers, chemistry, energy and environmental research, and other allied domains.

Download or read book Lignin written by Swati Sharma and published by Springer Nature. This book was released on 2020-04-13 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview on origin, structure, properties, modification strategies and applications of the biopolymer lignin. It is organized into four themed parts. The first part focuses on the analysis and characterization of the second most abundant biopolymer. The following part is devoted to the biological aspects of lignin such as biosynthesis and degradation. In the third part, chemical modification strategies and the preparation of composites as well as nano- and microparticles are discussed.The final part addresses the industrial application of lignin and its derivatives, as well as lignin materials. The usage for synthesis of biofuels, fine chemicals and in agriculture and food industry is covered. This book is a comprehensive source for researchers, scientists and engineers working in the field of biopolymers as well as renewable materials and sources.