Download or read book Fabricate 2014 written by Fabio Gramazio and published by UCL Press. This book was released on 2017-08-24 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: FABRICATE is an international peer reviewed conference that takes place every three years with a supporting publication on the theme of Digital Fabrication. Discussing the progressive integration of digital design with manufacturing processes, and its impact on design and making in the 21st century, FABRICATE brings together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology and computation. Discussion on key themes includes: how digital fabrication technologies are enabling new creative and construction opportunities from component to building scales, the difficult gap that exists between digital modelling and its realisation, material performance and manipulation, off-site and on-site construction, interdisciplinary education, economic and sustainable contexts. FABRICATE features cutting-edge built work from both academia and practice, making it a unique event that attracts delegates from all over the world. FABRICATE 2011, 2014 and 2017 are now all available to download free from UCL Press.

Download or read book Fabricate written by Fabio Gramazio and published by GTA Verlag. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the inaugural FABRICATE conference 2011 in London, the most important forum for international discussion on digital fabrication in architecture has resumed by Fabio Gramazio and Matthias Kohler at ETH Zurich. In contrast to the projects presented in 2011 at the Bartlett School of Architecture, which were balanced between practice and research, the questions about design and materialisation in architecture, construction, engineering, manufacturing, material and software design currently seem to be driven more by research institutions and young start-up entrepreneurs than by architectural practice. While digital fabrication technologies are becoming common practice in architecture for prototyping as well as in the realisation of buildings, contemporary research does not just investigate their further development, but presents ways to integrate them already in an early design phase to definitely overcome the still prevalent separation of design and making.

Download or read book Fabricate 2020 written by Jane Burry and published by UCL Press. This book was released on 2020-04-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2020 is the fourth title in the FABRICATE series on the theme of digital fabrication and published in conjunction with a triennial conference (London, April 2020). The book features cutting-edge built projects and work-in-progress from both academia and practice. It brings together pioneers in design and making from across the fields of architecture, construction, engineering, manufacturing, materials technology and computation. Fabricate 2020 includes 32 illustrated articles punctuated by four conversations between world-leading experts from design to engineering, discussing themes such as drawing-to-production, behavioural composites, robotic assembly, and digital craft.

Download or read book Advances in Architectural Geometry 2014 written by Philippe Block and published by Springer. This book was released on 2014-12-26 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 24 technical papers presented at the fourth edition of the Advances in Architectural Geometry conference, AAG 2014, held in London, England, September 2014. It offers engineers, mathematicians, designers, and contractors insight into the efficient design, analysis, and manufacture of complex shapes, which will help open up new horizons for architecture. The book examines geometric aspects involved in architectural design, ranging from initial conception to final fabrication. It focuses on four key topics: applied geometry, architecture, computational design, and also practice in the form of case studies. In addition, the book also features algorithms, proposed implementation, experimental results, and illustrations. Overall, the book presents both theoretical and practical work linked to new geometrical developments in architecture. It gathers the diverse components of the contemporary architectural tendencies that push the building envelope towards free form in order to respond to multiple current design challenges. With its introduction of novel computational algorithms and tools, this book will prove an ideal resource to both newcomers to the field as well as advanced practitioners.

Download or read book Fabricate written by Achim Menges and published by UCL Press. This book was released on 2017-04-03 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology and computation, Fabricate is a triennial international conference, now in its third year (ICD, University of Stuttgart, April 2017). The 2017 edition features 32 illustrated articles on built projects and works in progress from academia and practice, including contributions from leading practices such as Foster + Partners, Zaha Hadid Architects, Arup, and Ron Arad, and from world-renowned institutions including ICD Stuttgart, Harvard, Yale, MIT, Princeton University, The Bartlett School of Architecture (UCL) and the Architectural Association.Each year it produces a supporting publication, to date the only one of its kind specialising in Digital Fabrication.

Download or read book Fabricate 2024 written by Bob Sheil and published by UCL Press. This book was released on 2024-04-04 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2024: Creating Resourceful Futures is the fifth volume in the series of Fabricate publications. The first conference – ‘Making Digital Architecture’ – explored the ways in which technology, design and industry are shaping the world around us. Since then, we have become finely attuned to the negative impacts of this shaping. The 2024 conference, hosted in Copenhagen, sets focus on the pressing need to develop new models for architectural production that rethink how resource is deployed, its intensity, its socio-ecological origins and sensitivity to environment. This book features the work of designers, engineers and makers operating within the built environment. It documents disruptive approaches that reconsider how fabrication can be leveraged to address our collective and entangled challenges of resource scarcity, climate emergency and burgeoning demand. Exploring case studies of completed buildings and works-in-progress, together with interviews with leading thinkers, this edition of Fabricate offers a plurality of tangible models for design and production that set a creative and responsible course towards resourceful futures.

Download or read book Developing Novel Spinning Methods to Fabricate Continuous Multifunctional Fibres for Bioapplications written by Azadeh Mirabedini and published by Springer. This book was released on 2018-07-23 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of three dimensional electroactive fibres using a novel coaxial wet-spinning approach from organic conductors in combination with non-conducting hydrogel polymers. This book also presents the characterization and evaluation of multiaxial biofibres in terms of mechanical, physical, electrochemical and biological properties, and explores their use in a diverse range of applications including implantable electrodes, drug delivery systems and energy-storage systems. In the first chapter, the author highlights the significance of engineering three dimensional fibres, introduces the involved hydrogels and organic conductors with emphasis on their biomedical application, and collects some of the previously established methods for fabrication of biofibres. In the second chapter, particular attention is given to the overall experimental fabrication methods and characterization analyses conducted in the work. Chapters three to five present the main findings of this work, in which readers will discover how novel hybrid hydrogel fibres with an inner core of chitosan and alginate were prepared and characterized, how graphene was incorporated into coaxial wet-spun biofibres, and how one-dimensional triaxial fibres were developed using a novel coaxial wet-spinning fibre production method and applied as potential battery devices. In the final chapter of this work, the author summarizes the main achievements of the work and outlines some recommendations for future research.

Download or read book Fabricate 2011 written by Ruairi Glynn and published by UCL Press. This book was released on 2017-08-24 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: FABRICATE is an international peer reviewed conference that takes place every three years with a supporting publication on the theme of Digital Fabrication. Discussing the progressive integration of digital design with manufacturing processes, and its impact on design and making in the 21st century, FABRICATE brings together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology and computation. Discussion on key themes includes: how digital fabrication technologies are enabling new creative and construction opportunities from component to building scales, the difficult gap that exists between digital modelling and its realisation, material performance and manipulation, off-site and on-site construction, interdisciplinary education, economic and sustainable contexts. FABRICATE features cutting-edge built work from both academia and practice, making it a unique event that attracts delegates from all over the world. FABRICATE 2011, 2014 and 2017 are now all available to download free from UCL Press.

Download or read book Computer Aided Architectural Design Hello Culture written by Ji-Hyun Lee and published by Springer. This book was released on 2019-06-13 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes selected papers of the 18th International Conference on Computer-Aided Architectural Design Futures, CAAD Futures 2019, held in Daejeon, Republic of Korea, in June 2019. The 34 revised full papers presented were carefully reviewed and selected from 194 submissions. The papers are organized in topical sections on theory, methodology and practice of architectural and interior design; support systems for design decisions; tools, methods and implementation of urban design; rethinking space and spatial behavior; fabrication and materialization; and shape studies.

Download or read book Impact Design With All Senses written by Christoph Gengnagel and published by Springer Nature. This book was released on 2019-08-28 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects and expands on the current trend in the building industry to understand, simulate and ultimately design buildings by taking into consideration the interlinked elements and forces that act on them. Shifting away from the traditional focus, which was exclusively on building tasks, this approach presents new challenges in all areas of the industry, from material and structural to the urban scale. The book presents contributions including research papers and case studies, providing a comprehensive overview of the field as well as perspectives from related disciplines, such as computer science. The chapter authors were invited speakers at the 7th Symposium “Impact: Design With All Senses”, which took place at the University of the Arts in Berlin in September 2019.

Download or read book Advances in Manufacturing Technology written by Somashekhar S. Hiremath and published by Springer. This book was released on 2019-04-17 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented at the International Conference on Advances in Manufacturing Technology (ICAMT 2018). It includes contributions from different researchers and practitioners working in the field of advanced manufacturing technology. This book covers diverse topics of contemporary manufacturing technology including material processes, machine tools, cutting tools, robotics and automation, manufacturing systems, optimization technologies, 3D scanning and re-engineering, and 3D printing. Computer applications in design, analysis, and simulation tools for solving manufacturing problems at various levels starting from material designs to complex manufacturing systems are also discussed. This book will be useful for students, researchers, and practitioners working in the field of manufacturing technology.

Download or read book Elementary Food Science written by Richard Owusu-Apenten and published by Springer Nature. This book was released on 2022-05-28 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the success of the popular introductory text,Elementary Food Science(5th edition) coversabroad range of food science topics organized infour parts; Part (1)Interrelated food science topics, Part (2)Food safety & sanitation, Part (3)Food preservation and processing and Part (4)Handling & processing of foods. The opening two chapters discuss what food science actually is, the significanceforsociety, and the large contribution of the food industry to jobs and revenue in the USA and globally. Succeeding chapterscover food regulatory agencies, food labels, food quality and sensory evaluation, and consumer food literacy. Part (2)hastwo new chapters explaininghow microbes affect food quality,and alsofoodborne disease outbreaks; GMP is described independently and as a prerequisite for HACCP, VACCP andTACCPfood-safety management systems. Part (3) containstwo new chapters dealing with basic aspects of food processing, and the quality of dried foods. Part (4) covershandling and processing major food commodity groups (meat, dairy products, poultry and eggs, fish and shellfish, cereal grains, bakery products, fruits and vegetables, sugar confectionary). A new final chapter coversthe foodservice industry. The text highlights food science links with industry uniquelyusing the North American Industry Classification System (NAICS). Overall, the book is thoroughly modernized with over 1500 references cited in recognition of thousands of named food scientists and other professionals. The target readership remain unchanged for the current edition, i.e. Students of food science fromsenior high school, colleges or universities. Sections of the book will also appeal toadvanced readers from other disciplines with perhaps little or noprior food science experience. Additionally, readers covering the intersection of food science with culinary arts, foodservices, and nutritionor public health will find the book useful.

Download or read book Directed Self assembly of Block Co polymers for Nano manufacturing written by Roel Gronheid and published by Woodhead Publishing. This book was released on 2015-07-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The directed self-assembly (DSA) method of patterning for microelectronics uses polymer phase-separation to generate features of less than 20nm, with the positions of self-assembling materials externally guided into the desired pattern. Directed self-assembly of Block Co-polymers for Nano-manufacturing reviews the design, production, applications and future developments needed to facilitate the widescale adoption of this promising technology. Beginning with a solid overview of the physics and chemistry of block copolymer (BCP) materials, Part 1 covers the synthesis of new materials and new processing methods for DSA. Part 2 then goes on to outline the key modelling and characterization principles of DSA, reviewing templates and patterning using topographical and chemically modified surfaces, line edge roughness and dimensional control, x-ray scattering for characterization, and nanoscale driven assembly. Finally, Part 3 discusses application areas and related issues for DSA in nano-manufacturing, including for basic logic circuit design, the inverse DSA problem, design decomposition and the modelling and analysis of large scale, template self-assembly manufacturing techniques. Authoritative outlining of theoretical principles and modeling techniques to give a thorough introdution to the topic Discusses a broad range of practical applications for directed self-assembly in nano-manufacturing Highlights the importance of this technology to both the present and future of nano-manufacturing by exploring its potential use in a range of fields

Download or read book Architectural Research Addressing Societal Challenges Volume 2 written by Manuel Jorge Rodrigues Couceiro da Costa and published by CRC Press. This book was released on 2017-09-19 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EAAE/ARCC International Conference, held under the aegis of the EAAE (European Association for Architectural Education) and of the ARCC (Architectural Research Centers Consortium), is a conference organized every other year, in collaboration with one of the member schools / universities of those associations, alternatively in North America or in Europe. The EAAE/ARCC Conferences began at the North Carolina State University College of Design, Raleigh with a conference on Research in Design Education (1998); followed by conferences in Paris (2000), Montreal (2002), Dublin (2004), Philadelphia (2006), Copenhagen (2008), Washington (2010), Milan (2012) and Honolulu (2014). The conference discussions focus on research experiences in the field of architecture and architectural education, providing a critical forum for the dissemination and engagement of current ideas from around the world.

Download or read book Architecture and Urbanism A Smart Outlook written by Shaimaa Kamel and published by Springer Nature. This book was released on 2020-11-02 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings addresses the challenges of urbanization that gravely affect the world’s ecosystems. To become efficiently sustainable and regenerative, buildings and cities need to adopt smart solutions. This book discusses innovations of the built environment while depicting how such practices can transform future buildings and urban areas into places of higher value and quality. The book aims to examine the interrelationship between people, nature and technology, which is essential in pursuing smart environments that optimize human wellbeing, motivation and vitality, as well as promoting cohesive and inclusive societies: Urban Sociology - Community Involvement - Place-making and Cultural Continuity – Environmental Psychology - Smart living - Just City. The book presents exemplary practical experiences that reflect smart strategies, technologies and innovations, by established and emerging professionals, provides a forum of real-life discourse. The primary audience for the work will be from the fields of architecture, urban planning and built-environment systems, including multi-disciplinary academics as well as professionals.

Download or read book Additive Manufacturing Materials and Technology written by Sanjay Mavinkere Rangappa and published by Elsevier. This book was released on 2024-07-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing Materials and Technologies discusses the recent developments and future possibilities in additive manufacturing. The book focuses on advanced technologies and materials, with chapters centered on shape memory materials, alloys and metals, polymers, ceramics, thermosets, biomaterials, and composites. Fiber-reinforced materials are covered as well, as are the life cycle and performance criteria of 3D printed materials. Other chapters look at the various applications of these materials and processing techniques, covering their use in the aerospace and automotive sectors, construction, bioengineering, and the pharmaceutical industry. Various additive manufacturing techniques such as electron beam melting, selective laser melting, laser sintered, fused deposition, and more are also studied. Presents a comprehensive overview of recent advances in additive manufacturing technology and materials research and development Outlines the processing methods, functionalization, mechanics, and applications of additive manufactured materials and technology Summarizes lifecycles and performance parameters of 3D printed materials Focuses on the types of shape memory materials and smart materials used in 3D printing in industrial applications and their applications

Download or read book Additive Manufacturing for Plastic Recycling written by Rupinder Singh and published by CRC Press. This book was released on 2022-04-26 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date discussion of breakthroughs on additive manufacturing for plastic material recycling to boost a circular economy. It offers new ideas of combining/hybridizing processing methods that work as a source of information for manufacturers in making new and strategic product development plans. Additive Manufacturing for Plastic Recycling: Efforts in Boosting a Circular Economy provides a critical, comprehensive, methodological, and strong state-of-the-art work on the processing of thermoplastic and thermosetting along with new directions and applications. It describes the common and hybrid approaches of recycling processes and includes theoretical and practical ideas of combining/hybridizing processing methods with the use of fused deposition modelling, which is one of the low-cost additive manufacturing techniques. The book also discusses mechanical twin-screw extrusion followed by case studies for developing hybrid composite structures for biomedical and structural applications. Recent innovations in melt processing for recycling and the fundaments, process parameters investigations, and applications for new product development are also presented. This book is a first-hand reference source of information for academic scholars and commercial manufacturers for making strategic development plans for new product development.