Download or read book Extrusion Coating written by B. H Gregory and published by Trafford Publishing. This book was released on 2005 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications

Download or read book Extrusion Coating Manual written by Technical Association of the Pulp and Paper Industry. Water Removal Committee and published by Tappi. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reference on extrusion coating processes, equipment, and raw materials, for engineers, technicians, and operators. Offers information on classical materials and troubleshooting techniques as well as the latest materials and machine designs, with chapters on screw design, extrusion dies, bead reduction die technology, pretreatments, coat weight and thickness measurement, and winding. Other topics include safety, polyolefin and polyethylene for extrusion coating, properties of common polymers, color and additives, and processing and converting tips for cast film and extrusion coating. Includes bandw photos and diagrams. No index. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Extrusion Coating Manual Fifth Edition written by Warren Durling and published by . This book was released on 2017-08-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Extrusion Coating Lamination and Coextrusion written by Bertram Hubert Gregory and published by . This book was released on 2012 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical study of the production and potential of multilayered plastic films This book is written for the industry professional engaged in the development, production or specification of multilayered films for packaging and other industrial applications. It will enable the reader to optimize product performance and evaluate the most cost effective solutions, with useful information on the key polymers and substrates used. Multilayer film structures provide properties and performance which could not be achieved by a single material, whilst also exploiting cheap and easily processed polymers. All three processes described can be used in their manufacture, and in combination they provide yet more options and benefits. One role of this book is to explain when each should be used. This is a practical process manual filled with useful advice for the processor seeking the optimum product, describing the effects of machine design, process variables and materials selection. There is sufficient theory for the student or industry newcomer who wishes to understand how the processes work. Designers and end-users will also find plenty of information on the properties and performance that can be obtained.

Download or read book Extrusion Coating written by B. H. Gregory and published by Trafford Publishing. This book was released on 2008-05-28 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive study of extrusion coating technology describes the process and applications in detail, combining experimental data with computer modeling and the author's 30 years of experience. This methodology provides insight, clarity and assistance in problem solving, process optimization and new product development. The oportunities to exploit a wide range of polymers by the extrusion coater are discussed in detail. These include LDPE, HDPE, PP, ionomers, copolymers and blends and speciality materials, such as EVOH and PET. Everything you wanted to know about: Screw and die design for mono and coextrusion. Chill roll design and winders. Maximizing adhesion at high line speeds:- time in air gap and melt relaxation. Adhesion promotion:- corona, flame, ozone treatment and chemical primers. Feedblock and dual manifold coextrusion compared. Coextrusion:- control layer arrangement and eliminate interfacial instabilities. Optimize melt stability and minimize neck-in in air gap. Material selection:- polyethylenes, copolymers, ionomers, metallocenes, polypropylene etc. Substrates: pulp and paper, aluminium foil, plastic films etc. Applications for extrusion coatings and laminates. Minimize odor and off-taste and the scalping phenomenon in food packaging. Trouble shooting and many more insights. Target Audience: Engineers, marketers, technicians and students involved with the extrusion coating process. Table of Contents: The Extrusion Coating Process Equipment and Screw Design Die Design Stretching Flows and Neck-In Adhesion Coextrusion Adhesion Promotion Methods Polymers for Extrusion Coating: includes, coplymers, ionomers, PP, blends, metallocene PEs Speciality Polymers: EVOH and PET Improving organoleptic properties Substrates and Films for the EXtrusion Coater Extrusion Coated Products and Applications

Download or read book The Science and Technology of Flexible Packaging written by Barry A. Morris and published by William Andrew. This book was released on 2022-07-23 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Flexible Packaging: Multilayer Films from Resin and Process to End Use, Second Edition provides a comprehensive guide on plastic films in flexible packaging, covering scientific principles, materials properties, processes and end use considerations. Sections discuss the science of multilayer films in a concise and impactful way, presenting the fundamental understanding required to improve product design, material selection and processes. In addition, the book includes information on why one material is favored over another and how film or coating affects material properties. Descriptions and analysis of key properties of packaging films are provided from engineering and scientific perspectives. With essential scientific insights, best practice techniques, environmental sustainability information and key principles of structure design, this book provides information aids in material selection and processing, how to shorten development times and deliver stronger products, and ways to enable engineers and scientists to deliver superior products with reduced development time and cost. Provides essential information on all aspects of multilayer films in flexible packaging, including processing, properties, materials and end use Bridges the gap between scientific principles and practical challenges Includes explanations to assist practitioners in overcoming challenges Enables the reader to address new challenges, such as design for sustainability and eCommerce

Download or read book Polyethylene Film Extrusion written by B. H Gregory and published by Trafford Publishing. This book was released on 2009-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised version of this book is now available.The polyethylene industry has been in the midst of major restructuring and rationalization. This has lead to joint ventures and alliances to combine technologies and exploit opportunities to maximize improvements in process productivity, catalyst innovations, and enhancements in extrusion technology and converting. This comprehensive study of the polyethylene film extrusion process describes this technology in detail. In depth descriptions of the manufacturing processes for polyethylene homopolymers and copolymers, including metallocenes, are reviewed. All aspects of machine design with particular emphasis on screws and dies including coextrusion are discussed comprehensively. With computer modeling, the interactions between equipment and polymer are quantified. All aspects of equipment design and polymer features that control melt fracture, interfacial instabilities, gauge control, output and temperature, and cooling of blown and cast film processes are presented quantitatively. This methodology will highlight solutions in troubleshooting for optimum design and operation and the best available polymer and formulation choices. All polyethylene film applications in packaging, agriculture, lamination, and construction, consumer, industrial, and health care are reviewed and discussed in depth.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques

Download or read book Manufacturing Flexible Packaging written by Thomas Dunn and published by William Andrew. This book was released on 2014-09-04 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficiently and profitably delivering quality flexible packaging to the marketplace requires designing and manufacturing products that are both "fit-to-use" and "fit-to-make". The engineering function in a flexible packaging enterprise must attend to these dual design challenges. Flexible Packaging discusses the basic processes used to manufacture flexible packaging products, including rotogravure printing, flexographic printing, adhesive lamination, extrusion lamination/coating; and finishing/slitting. These processes are then related to the machines used to practice them, emphasising the basics of machines’ control systems , and options to minimize wasted time and materials between production jobs. Raw materials are also considered, including the three basic forms: Rollstock (paper, foil, plastic films); Resin; and Wets (inks, varnishes, primers). Guidance is provided on both material selection, and on adding value through enhancement or modification of the materials’ physical features. A ‘measures’ section covers both primary material features – such as tensile, elongation, modulus and elastic and plastic regions – and secondary quality characteristics such as seal and bond strengths, coefficient of friction, oxygen barrier and moisture vapour barrier. Helps engineers improve existing raw material selection and manufacturing processes for manufacturing functional flexible packaging materials. Covers all aspects of delivering high value packaging to the customer – from the raw materials, to the methods of processing them, the machines used to do it, and the measures required to gauge the characteristics of the product. Helps engineers to minimize waste and unproductive time in production.

Download or read book Film Extrusion Manual Third Edition written by James F. Macnamara, Jr. and published by . This book was released on 2020-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Complete Polyethylene Film Extrusion Manual written by Bertram Hubert Gregory and published by . This book was released on 2014-11-24 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and detailed evaluation of polyethylene film extrusion processes for a diverse range of products. Polyethylene film is pervasive in many aspects of everyday life in applications including consumer and bulk packaging, household items, construction, horticulture, medical and hygiene products and many more. Established now for many years the technology of polyethylene film extrusion continues to develop as newer applications often demand superior performance and more established uses strive for reduced materials consumption by downgauging. Film performance is influenced by the nature of the polymer, the manufacturing process and a wide variety of additives, as well as the option of creating ever more complex multi-layered structures by coextrusion, laminating, coating and even intentional blocking. Applications may demand stretch or shrink behaviour, mechanical strength, heat sealability and high or low permeability. This book has been written for a wide readership of technologists, engineers, marketers and students engaged in the development and production of polyolefin films for all applications. The aim is to assist in optimizing product performance, evaluating the most cost effective solutions and providing useful information on the key polymers and films commercially available. Key features of screw and die designs and film treatments, blending and formulations are evaluated. Clear diagrams are provided together with copious data.

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-12 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book ANTEC 2001 written by Society of Plastics Engineers. Technical Conference and published by Taylor & Francis. This book was released on 2001 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Roll to Roll Manufacturing written by Jehuda Greener and published by John Wiley & Sons. This book was released on 2018-03-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single-volume resource featuring state-of-the art reviews of key elements of the roll-to-roll manufacturing processing methodology Roll-to-roll (R2R) manufacturing is an important manufacturing technology platform used extensively for mass-producing a host of film-type products in several traditional industries such as printing, silver-halide photography, and paper. Over the last two decades, some of the methodologies and know-how of R2R manufacturing have been extended and adapted in many new technology areas, including microelectronics, display, photovoltaics, and microfluidics. This comprehensive book presents the state-of-the-art unit operations of the R2R manufacturing technology, providing a practical resource for scientists, engineers, and practitioners not familiar with the fundamentals of R2R technology. Roll-to-Roll Manufacturing: Process Elements and Recent Advances reviews new developments in areas such as flexible glass, display, and photovoltaics and covers a number of process innovations implemented recently to extend and improve the capabilities of traditional R2R lines. It covers such topics as: coating and solidification processes, in-line vacuum deposition, drying, web handling and winding, polymer film substrates, novel hybrid composite films, flexible solar cells and more. Additionally, this book: Examines key elements (unit operations) of the R2R technology, and discusses how these elements are utilized and integrated to achieve desired process efficiencies in a host of applications. Illustrates several established and novel application areas where R2R processing is utilized in current or future products. Discusses process design methodology and key advantages of R2R manufacturing technology over batch or sheet-to-sheet operations. Roll-to-Roll Manufacturing: Process Elements and Recent Advances is an ideal book for undergraduate and graduate students in various science and engineering disciplines, as well as for scientists, engineers, and technical and business leaders associated in any way with the development, commercialization, and manufacture of a variety of film products.

Download or read book Extrusion of Aluminium Alloys written by T. Sheppard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the importance of extruded alloys has increased due to the decline in copper extrusion, increased use in structural applications, environmental impact and reduced energy consumption. There have also been huge technical advances. This text provides comprehensive coverage of the metallurgical, mathematical and practical features of the process.

Download or read book Melt Rheology and its Applications in the Plastics Industry written by John M Dealy and published by Springer Science & Business Media. This book was released on 2013-05-14 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of Melt Rheology and its Role in Plastics Processing, although the title has changed to reflect its broadened scope. Advances in the recent years in rheometer technology and polymer science have greatly enhanced the usefulness of rheology in the plastics industry. It is now possible to design polymers having specific molecular structures and to predict the flow properties of melts having those structures. In addition, rheological properties now provide more precise information about molecular structure. This book provides all the information that is needed for the intelligent application of rheology in the development of new polymers, the determination of molecular structure and the correlation of processability with laboratory test data. Theory and equations are limited to what is essential for the use of rheology in the characterization of polymers, the development of new plastics materials and the prediction of plastics processing behavior. The emphasis is on information that will be of direct use to practitioners. Extensive references are provided for those wishing to pursue certain issues in greater depth. While the primary audience is applied polymer scientists and plastics engineers, the book will also be of use to postgraduate students in polymer science and engineering and as a text for a graduate course.

Download or read book Guide to Information Sources in Engineering written by Charles Lord and published by Bloomsbury Publishing USA. This book was released on 2000-08-15 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only source that focuses exclusively on engineering and technology, this important guide maps the dynamic and changing field of information sources published for engineers in recent years. Lord highlights basic perspectives, access tools, and English-language resources—directories, encyclopedias, yearbooks, dictionaries, databases, indexes, libraries, buyer's guides, Internet resources, and more. Substantial emphasis is placed on digital resources. The author also discusses how engineers and scientists use information, the culture and generation of scientific information, different types of engineering information, and the tools and resources you need to locate and access that material. Other sections describe regulations, standards and specifications, government resources, professional and trade associations, and education and career resources. Engineers, scientists, librarians, and other information professionals working with engineering and technology information will welcome this research