Download or read book Extruding Plastics written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques
Download or read book Concise Encyclopedia of Plastics written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: After over a century of worldwide production of all kinds trol persons, cost estimators, buyers, vendors, consultants, of products, the plastics industry is now the fourth largest and others. industry in the United States. This brief, concise, and prac The bulk of the book is the alphabetical listing of en tical book is a cutting edge compendium of the plastics tries. Preceding those entries is A Plastics Overview: Fig industry's information and terminology-ranging from ures and Tables (which presents eight summary guides on design, materials, and processes, to testing, quality control, the subjects examined in the text) and then the World of regulations, legal matters, and profitability. New and use Plastics Reviews (which presents 14 articles that provide ful developments in plastic materials and processing con general introductory information, comprehensive updates, tinually are on the horizon, and the examples of these de and important networking avenues within the world of velopments that are discussed in the book provide guides plastics). Following the alphabetical listing of entries, at the to past and future trends. end of the encyclopedia, seven appendices provide back This practical and comprehensive book reviews the ground and source guide information keyed to the text of the book. The extensive and useful Appendix A, List of plastics industry virtually from A to Z through its more than 25,000 entries. Its concise entries cover the basic is Abbreviations, lists all abbreviations used in the text.
Download or read book Extrusion Dies for Plastics and Rubber written by Christian Hopmann and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2017-04-10 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This definitive book provides a comprehensive account of the full range of dies used for extrusion of plastics and elastomers. The distinctive features of the various types of dies are described in detail. Expert advice on the configuration of dies is given, and the possibilities of computer-aided design, as well as its limitations, are demonstrated. Fundamentals and computational procedures are clearly explained so that no special prior knowledge of the subject is required. The mechanical configuration, handling, and maintenance of extrusion dies are described. Calibration procedures for pipes and profiles are also discussed. This book was written for plastics engineers who need daily support in their practical work in industry and science, as well as for students preparing for their professional life. The 4th edition is brought up to date with several important additions, including coverage of multilayer (>15 layer) dies, melt encapsulation, and simulation tools (rheological/thermal CFD simulations).
Download or read book Thermoforming written by Geza Gruenwald and published by CRC Press. This book was released on 1998-05-08 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE FOREWORD Dr. Gruenwald has indicated the desirable properties of polymerics for differing applications; thus, his text is especially useful for polymer chemists who must "tailor" plastic materials for specific groups of applications. Engineers in extruding and calendering film and sheet will benefit from the intimate relationships elucidated between processing parameters imposed upon stocks employed in thermoforming and the products thereof. Mold designers are provided with a complete guide that will enable them to avoid the less obvious pitfalls and wasted effort so often experienced in the evolution of molds for (especially) complex parts.. Quite likely, Dr. Gruenwald's suggestions willl lead to considerable benefits to those who read and practice by this remarkable exposition of thermoforming technology. Robert K. Jordan Director-Metalliding Institute, Director-Engineering Research Institute, Scientist in Residence, Gannon University
Download or read book Plastic Waste Management written by Kalim Deshmukh and published by John Wiley & Sons. This book was released on 2024-03-15 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste Management Comprehensive resource on innovative and breakthrough developments in plastic waste management, covering a wide range of processing techniques and applications Plastic Waste Management offers a complete guide to the best plastic waste management practices through recycling, incineration, landfill, and other processes, discusses applications of plastic waste management including energy generation, biochemical production, construction, and food packaging, covering current challenges relating to plastic waste, explaining the sources of waste and their routes into the environment, and providing systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstock, gasification, and thermal recycling. The book also discusses different biodegradation mechanisms of plastic wastes and ecotoxicity and ecological Implications of marine plastic debris. From a cultural perspective, the book provides information regarding environmental and health implications, societal issues, and current challenges associated with plastic waste management. Written by leading experts in the field and edited by two highly qualified academics, Plastic Waste Management covers specific sample topics such as: A a roadmap towards a circular economy and environmental sustainability via effective management strategies for plastic wastes Implementation of an analytical hierarchy process for developing better waste collection systems, and chemical recycling of plastic waste for sustainable development Mechanisms, perspectives, and challenges for natural biodegradation of plastic wastes, and conversion of plastic wastes into value added materials Plastic wastes management and disposal in developing countries, and challenges and strategies for plastic waste management during and post COVID-19 pandemic Plastic Waste Management is a highly valuable resource for scientists and researchers working in the fields of environmental science, environmental engineering, and plastic engineering towards the goal of developing sustainable materials, along with graduate and postgraduate students in related programs of study, and professionals and engineers in related industries.
Download or read book Plastics Extrusion Technology Handbook written by Sidney Levy and published by . This book was released on 1981 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting an overview of extrusion technology as applied to the operation of extrusion systems and the design of tooling and equipment for use in the process, this practical handbook provides basic technical information on the behavior of polymer and plasties materials in the extrusion process.
Download or read book Encyclopedia of Chemical Processing written by Sunggyu Lee and published by Taylor & Francis US. This book was released on 2006 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplying nearly 350 expertly-written articles on technologies that can maximize and enhance the research and production phases of current and emerging chemical manufacturing practices and techniques, this second edition provides gold standard articles on the methods, practices, products, and standards recently influencing the chemical industries. New material includes: design of key unit operations involved with chemical processes; design, unit operation, and integration of reactors and separation systems; process system peripherals such as pumps, valves, and controllers; analytical techniques and equipment; current industry practices; and pilot plant design and scale-up criteria.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2004-12-31 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why is it important to get to equilibrium and how long does it take? Are there problems running polypropylene profiles on a single screw extruder? Does the job involve compounding color concentrates on a corotating twin screw extruder? This unique reference work is designed to aid operators, engineers, and managers in quickly answering such practical day-to-day questions in extrusion processing. This comprehensive volume is divided into 7 Parts. It contains detailed reference data on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. This reference is a practical guide to extrusion bringing together both the equipment and materials processing aspects. It provides basic and advanced topics about the thermoplastics processing in the extruder, for reference and training. Parts 1 û 3, emphasize the fundamentals, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. Parts 4 û 7 treat advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. Extensive applications in Part 7 cover such contemporary areas as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. Each chapter includes review topics.
Download or read book Extrusion Dies written by Walter Michaeli and published by . This book was released on 1984 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Plastics Joining written by Michael J. Troughton and published by William Andrew. This book was released on 2008-10-17 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this bestselling reference provides fully updated and detailed descriptions of plastics joining processes, plus an extensive compilation of data on joining specific materials. The volume is divided into two main parts: processes and materials. The processing section has 18 chapters, each explaining a different joining technique. The materials section has joining information for 25 generic polymer families. Both sections contain data organized according to the joining methods used for that material. - A significant and extensive update from experts at The Welding Institute - A systematic approach to discussing each joining method including: process, advantages and disadvantages, applications, materials, equipment, joint design, and welding parameters - Includes international suppliers' directory and glossary of key joining terms - Includes new techniques such as flash free welding and friction stir welding - Covers thermoplastics, thermosets, elastomers, and rubbers.
Download or read book Plastics written by and published by . This book was released on 1966 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics
Download or read book Industrial Plastics written by and published by . This book was released on 1946 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Stress Cracking of Plastics written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 1996 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simultaneous action of stress and strain on plastics in contact with specific fluids causes the onset of cracking and embrittlement of plastic known as environmental stress cracking. Since this is responsible for 15% of all failures of plastics components, environmental stress cracking has long been the subject of intensive research. This volume reviews factors that influence environmental stress cracking, and the state of knowledge regarding many families of plastics. Various types of damage, from disfiguring to catastrophic, are discussed in this volume, with the period of time over which the damage occurs. Plastics designers and specifiers will benefit from the wealth of information and data provided.
Download or read book Ceramic Processing written by R.A. Terpstra and published by Springer Science & Business Media. This book was released on 1995-07-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Modern Plastics written by and published by . This book was released on 1946 with total page 1626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
