Download or read book Review on Copper Hydrometallurgy written by Roger Rumbu and published by Lulu.com. This book was released on 2019-02-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current technological challenges mean that engineers are expected to apply the available extraction in the field of extractive metallurgy.Extraction of copper, one of the most used metals, has been practiced since ancient times around the world.Three crucial steps, namely sulphide roasting, leaching of ores and concentrates, and electro-extraction through solvent extraction, are described here with ample details, diagrams, examples and explanations to enlighten practitioners. these techniques are widespread where copper ores are mined.These modes of extraction are applied in operations for many non-ferrous metals from where the interest of this book which enters in the collection of Extractive Metallurgy.Roger RUMBU, Met. Eng., PPM, TBOM.
Download or read book Extractive Metallurgy of Copper written by Anil Kumar Biswas and published by Oxford ; Toronto : Pergamon. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics.Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Review on Copper Hydrometallurgy written by Roger Rumbu and published by Lulu.com. This book was released on 2019-01-28 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current technological challenges mean that engineers are expected to apply the available extraction in the field of extractive metallurgy. Extraction of copper, one of the most used metals, has been practiced since ancient times around the world. Three crucial steps, namely sulphide roasting, leaching of ores and concentrates, and electro-extraction through solvent extraction, are described here with ample details, diagrams, examples and explanations to enlighten practitioners. these techniques are widespread where copper ores are mined. These modes of extraction are applied in operations for many non-ferrous metals from where the interest of this book which enters in the collection of Extractive Metallurgy. Roger RUMBU, Met. Eng., PPM.
Download or read book Extractive Metallurgy of Copper Hydrometallurgy and electrowinning written by and published by . This book was released on 1976 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydroxyoximes and Copper Hydrometallurgy written by Jan Szymanowski and published by CRC Press. This book was released on 1993-06-11 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydroxyoximes and Copper Hydrometallurgy provides a current examination of what is known regarding hydroxyoxime extractants, the chemistry and physicochemistry of extraction, and the potential of applying hydroxyoximes for extraction of copper and other metals in industrial processes. Topics addressed include the development of the hydrometallurgical process, methods of synthesis and structural characteristics, extraction properties, losses of active substances and problems associated with environmental pollution, the potential of metal extraction and separation with hydroxyoximes, methods of extraction and stripping that can improve metal separation and recovery, the applications of hydroxyoximes in various membrane processes, and industrial processes and equipment used for processing oxide ores and tailing. The book will benefit metallurgists, hydrometallurgists, analytical and physical chemists, and researchers in mining industries and solvent extraction.
Download or read book Extractive Metallurgy of Copper written by William G. Davenport and published by Elsevier. This book was released on 2002-09-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been extensively revised and updated since the 3rd edition published in 1994. It contains an even greater depth of industrial information, focussing on how copper metal is extracted from ore and scrap, and how this extraction could be made more efficient. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The book demonstrates how recycling of copper and copper alloy scrap is an important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics. Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Extractive Metallurgy of Copper written by Mark E. Schlesinger and published by Elsevier. This book was released on 2011-09-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: William G.I. Davenport
Download or read book Copper Leaching Solvent Extraction and Electrowinning Technology written by Gerald V. Jergensen and published by SME. This book was released on 1999 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume recognizes the growing role of solvent extraction and electrowinning technology in the world copper business. This well-established, remarkable hydrometallurgical achievement fills an important role in our technical ability to extract copper in an efficient and cost-effective way. This proceedings documents the present status of the SX-EW business. It represents a substantial body of historical, scientific, engineering, and commercial information regarding the growth and application of the technology.
Download or read book Hydrometallurgy written by Michael Free and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides a college-level overview of chemical processing of metals in water-based solutions, in the field that is known as hydrometallurgy"--
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Physical Chemistry of Metallurgical Processes written by M. Shamsuddin and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various metallurgical topics, viz. roasting of sulfide minerals, matte smelting, slag, reduction of oxides and reduction smelting, interfacial phenomena, steelmaking, secondary steelmaking, role of halides in extraction of metals, refining, hydrometallurgy and electrometallurgy. Each chapter is illustrated with appropriate examples of applications of the technique in extraction of some common, reactive, rare or refractory metal together with worked out problems explaining the principle of the operation.
Download or read book Electrometallurgy 2012 written by Michael L. Free and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by The Metallurgy and Materials Society of CIM and the Hydrometallurgy and Electrometallurgy Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA, March 11-15, 2012
Download or read book Advances in Hydrometallurgy written by Alexandre Chagnes and published by MDPI. This book was released on 2020-05-22 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new technologies and the increasing demand for mineral resources from emerging countries are responsible for significant tensions in the pricing of non-ferrous metals. Some metals have become strategic and critical because they are used in many technological applications such as flat panel TVs (indium), solar panel cells (indium), lithium-ion batteries for electric vehicles (lithium, cobalt), magnets (rare earth elements, such as neodymium and dysprosium), scintillators (rare earths), and aviation and medical applications (titanium); their availabilities remain limited. The secured supply of these metals is crucial to continue producing and exporting these technologies, and because the specific properties of these metals make them essential and difficult to substitute for a given industrial application. Hydrometallurgy have the advantages of being able to process low-grade ores, to allow better control of co-products, and have a lower environmental impact providing that the hydrometallurgical route is optimized and cheap. The need to develop sustainable, efficient, and cheap processes to extract metals from complex and poor polymetallic matrices is real. The aim of this book was to highlight recent advances related to hydrometallurgy to face new challenges in metal production.
Download or read book The Chemistry of Gold Extraction written by John Marsden and published by SME. This book was released on 2006 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively revised and updated, this edition provides the broad base of knowledge required by all working in the gold extraction and gold processing industries. It bridges the gap between research and industry by emphasizing practical applications of chemical principles and techniques.
Download or read book Hydrometallurgy in Extraction Processes Volume I written by T.K. Mukherjee and published by Routledge. This book was released on 2019-01-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set provides a full account of hydrometallurgy. Filled with illustrations and tables, this work covers the flow of source material from the mined or concentrate state to the finished product. It also highlights ion exchange, carbon adsorption and solvent extraction processes for solution purification and concentration. The extensive
Download or read book Hydrometallurgical Production of Copper from Flotation Concentrates written by J. R. Cobble and published by . This book was released on 1993 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
