Download or read book External Corrosion and Corrosion Control of Buried Water Mains written by Andrew E. Romer and published by American Water Works Association. This book was released on 2004 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water utilities often do not know the specific cause of external corrosion observed on their water mains, and consequently, the chosen preventative measure may not work effectively. Historically, these choices are based on data from other industries (e.g., gas and oil) and may not be suitable for the water industry. Corrosion of metallic pipes can be caused by a variety of mechanisms, each of which requires a different solution. Determining which corrosion mechanism is at work is not a simple matter, because the resulting pipe damage looks similar for all of them. The failure to properly identify corrosion sources may produce prevention systems that are ineffective or do not last. For example, it is not effective to install an anode bag on a main that has a bacteriological corrosion problem. Similarly, an anode bag installed to reduce corrosion caused by a stray impressed current would be quickly used up and would provide only short-term protection. Much recent research on corrosion has focused on internal corrosion, primarily related to water-quality issues, such as lead and copper control and red water. This project will examine external corrosion, which affects the structural integrity of the pipe and makes it vulnerable to leaks and breakage. After identifying the causes of external corrosion, the study will find economical solutions for each type of corrosion and verify them through field trials.
Download or read book Corrosion Control for Buried Water Mains written by and published by American Water Works Association. This book was released on 2011-01-12 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book External Corrosion Introduction to Chemistry and Control written by AWWA Staff and published by American Water Works Association. This book was released on 2013-04-19 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual of water supply practices explains the causes and prevention of external pipe corrosion. Third Edition.
Download or read book Corrosion Control for Buried Water Mains written by Andrew E. Romer and published by . This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book External Corrosion written by American Water Works Association and published by . This book was released on 2004 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The basics are explained along with how to institute a corrosion control program. This book explains how to evaluate the potential for damage by studying soil content, pipe material, and other variables. Includes information on installing and protecting distribution system pipe.
Download or read book Review of the Bureau of Reclamation s Corrosion Prevention Standards for Ductile Iron Pipe written by National Research Council and published by National Academies Press. This book was released on 2009-11-19 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductile iron pipe (DIP) was introduced about 50 years ago as a more economical and better-performing product for water transmission and distribution. As with iron or steel pipes, DIP is subject to corrosion, the rate of which depends on the environment in which the pipe is placed. Corrosion mitigation protocols are employed to slow the corrosion process to an acceptable rate for the application. When to use corrosion mitigation systems, and which system, depends on the corrosivity of the soils in which the pipeline is buried. The Bureau of Reclamation's specification for DIP in highly corrosive soil has been contested by some as an overly stringent requirement, necessitating the pipe to be modified from its as-manufactured state and thereby adding unnecessary cost to a pipeline system. This book evaluates the specifications in question and presents findings and recommendations. Specifically, the authoring committee answers the following questions: Does polyethylene encasement with cathodic protection work on ductile iron pipe installed in highly corrosive soils? Will polyethylene encasement and cathodic protection reliably provide a minimum service life of 50 years? What possible alternative corrosion mitigation methods for DIP would provide a service life of 50 years?
Download or read book External Corrosion Control for Infrastructure Sustainability written by American Water Works Association and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual of water supply practices explains the causes and prevention of external pipe corrosion.
Download or read book Internal Corrosion Control of Water Supply Systems written by Colin Hayes and published by IWA Publishing. This book was released on 2012-08-31 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Metals and Related Substances in Drinking Water Set - buy all five books together to save over 30%! This Code of Practice is concerned with metal pick-up by drinking water within the water supply chain, particularly from water mains and from domestic and institutional pipe-work systems. The principal metals of interest are copper, iron, and lead, and to a lesser extent nickel and zinc. The emphasis is on cold drinking water at its point of use by consumers. Metals arising from water sources and hot water systems are not considered. The intention is that this Code of Practice establishes an international standard for the control of internal corrosion of water supply systems. It provides a basis for identifying both problems and sustainable solutions in a manner which is sound scientifically and will help operators to achieve due diligence. It provides a template for improving internal corrosion control in countries, cities or towns where this has been neglected or poorly implemented. Internal Corrosion Control of Water Supply Systems is deliberately brief in its presentation of a wide array of complex information, in order to provide direction to practitioners that can be more easily related to their specific circumstances. The book also provides a series of check-lists and criteria to be used in risk assessment. Editor: Dr Colin R Hayes, University of Swansea, UK, Chair of IWA Specialist Group on Metals and Related Substances in Drinking Water.
Download or read book External Corrosion Control for Infrastructure Sustainability written by and published by . This book was released on 2013 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microbiologically Influenced Corrosion written by Brenda J. Little and published by John Wiley & Sons. This book was released on 2007-04-13 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multi-disciplinary, multi-industry overview of microbiologically influenced corrosion, with strategies for diagnosis and control or prevention Microbiologically Influenced Corrosion helps engineers and scientists understand and combat the costly failures that occur due to microbiologically influenced corrosion (MIC). This book combines recent findings from diverse disciplines into one comprehensive reference. Complete with case histories from a variety of environments, it covers: Biofilm formation Causative organisms, relating bacteria and fungi to corrosion mechanisms for groups of metals Diagnosing and monitoring MIC Electrochemical techniques, with an overview of methods for detection of MIC The impact of alloying elements, including antimicrobial metals, and design features on MIC MIC of non-metallics Strategies for control or prevention of MIC, including engineering, chemical, and biological approaches This is a valuable, all-inclusive reference for corrosion scientists, engineers, and researchers, as well as designers, managers, and operators.
Download or read book Underground Pipeline Corrosion written by Mark Orazem and published by Elsevier. This book was released on 2014-02-17 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground pipelines transporting liquid petroleum products and natural gas are critical components of civil infrastructure, making corrosion prevention an essential part of asset-protection strategy. Underground Pipeline Corrosion provides a basic understanding of the problems associated with corrosion detection and mitigation, and of the state of the art in corrosion prevention. The topics covered in part one include: basic principles for corrosion in underground pipelines, AC-induced corrosion of underground pipelines, significance of corrosion in onshore oil and gas pipelines, numerical simulations for cathodic protection of pipelines, and use of corrosion inhibitors in managing corrosion in underground pipelines. The methods described in part two for detecting corrosion in underground pipelines include: magnetic flux leakage, close interval potential surveys (CIS/CIPS), Pearson surveys, in-line inspection, and use of both electrochemical and optical probes. While the emphasis is on pipelines transporting fossil fuels, the concepts apply as well to metallic pipes for delivery of water and other liquids. Underground Pipeline Corrosion is a comprehensive resource for corrosion, materials, chemical, petroleum, and civil engineers constructing or managing both onshore and offshore pipeline assets; professionals in steel and coating companies; and academic researchers and professors with an interest in corrosion and pipeline engineering. Reviews the causes and considers the detection and prevention of corrosion to underground pipes Addresses a lack of current, readily available information on the subject Case studies demonstrate how corrosion is managed in the underground pipeline industry
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. Selects cost-effective methods to control corrosion Quantitatively measures and estimates corrosion rates Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others Provides a gateway to more than 1,000 industry best practices and international standards
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. Prolong the structural life of your offshore platforms and pipelines Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Internal Corrosion Control in Water Distribution Systems written by AWWA (American Water Works Association) and published by American Water Works Association. This book was released on 2011 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This AWWA manual of practice provides information on the factors that influence pipe corrosion, assessing corrosion-related impacts, water quality and implementation, and maintenance of an effective corrosion control program.
Download or read book Handbook of Cathodic Corrosion Protection written by Walter von Baeckmann and published by Elsevier. This book was released on 1997-10-17 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all aspects of cathodic protection in terms of both practice and theory.
Download or read book Corrosion Protection of Pipelines Conveying Water and Wastewater written by Robert C. Prevost and published by . This book was released on 1987 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The social importance and economic cost of water and sewage pipelines make it essential to maintain them in good working order. Corrosion is one of the most common factors in their alteration and possible, untimely destruction, but it can be prevented or controlled, usually at a relatively low cost. Based on an analysis of existing literature and a number of case studies, this document suggests a series of guidelines for effective corrosion control. Water treatment can play a key role in preventing or controlling internal pipe corrosion; the use of appropriate linings can protect metal components. Coatings or protective outer thin plastic sleeves can effectively guard pipelines against corrosion from external factors. Cathodic protection is also effective, but should be used only where required. New techniques are being developed for rehabilitating old pipelines to extend their functional life, thereby avoiding costly replacement. These processes require, however, a high level of expertise as well as specialized equipment; urban areas in developing countries with relatively newer and smaller pipeline networks and labor costs may therefore find rehabilitation to be a less cost-effective and attractive option.
Download or read book Proceedings AWWA Seminar on Corrosion Control written by and published by American Water Works Association. This book was released on 1982 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
