Download or read book Exposure to silica dust on continuous mining operations using flooded bed scrubbers written by Jay Colinet and published by . This book was released on 1997 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extracting the Science written by Jürgen Brune and published by SME. This book was released on 2010 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: These research papers also cover a spectrum of innovative technical solutions, including computer-controlled mining equipment, remote monitoring of air quality, and virtual reality training systems.
Download or read book Best Practices for Dust Control in Coal Mining written by Jay Colinet and published by Createspace Independent Pub. This book was released on 2010 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Respirable dust exposure has long been known to be a serious health threat to workers in many industries. In coal mining, overexposure to respirable coal mine dust can lead to coal workers' pneumoconiosis (CWP). CWP is a lung disease that can be disabling and fatal in its most severe form. In addition, miners can be exposed to high levels of respirable silica dust, which can cause silicosis, another disabling and/or fatal lung disease. Once contracted, there is no cure for CWP or silicosis. The goal, therefore, is to limit worker exposure to respirable dust to prevent development of these diseases. The passage of the Federal Coal Mine Health and Safety Act of 1969 established respirable dust exposure limits, dust sampling requirements for inspectors and mine operators, a voluntary x-ray surveillance program to identify CWP in underground coal miners, and a benefits program to provide compensation to affected workers and their families. The tremendous human and financial costs resulting from CWP and silicosis in the U.S. underground coal mine workforce are shown by the following statistics: 1. During 1970-2004, CWP was a direct or contributing cause of 69,377 deaths of U.S. underground coal mine workers. 2. During 1980-2005, over $39 billion in CWP benefits were paid to underground coal miners and their families. 3. Recent x-ray surveillance data for 2000-2006 show an increase in CWP cases. Nearly 8% of examined underground coal miners with 25 or more years of experience were diagnosed with CWP. 4. "Continuous miner operator" is the most frequently listed occupation on death certificates that record silicosis as the cause of death. In light of the ongoing severity of these lung diseases in coal mining, this handbook was developed to identify available engineering controls that can help the industry reduce worker exposure to respirable coal and silica dust. The controls discussed in this handbook range from long-utilized controls that have developed into industry standards to newer controls that are still being optimized. The intent was to identify the best practices that are available to control respirable dust levels in underground and surface coal mining operations. This handbook provides general information on the control technologies along with extensive references. In some cases, the full reference(s) will need to be consulted to gain in-depth information on the testing or implementation of the control of interest. The handbook is divided into five chapters. Chapter 1 discusses the health effects of exposure to respirable coal and silica dust. Chapter 2 discusses dust sampling instruments and sampling methods. Chapters 3, 4, and 5 focus on dust control technologies for longwall mining, continuous mining, and surface mining, respectively. Finally, it must be stressed that after control technologies are implemented, the ultimate success of ongoing protection for workers depends on continued maintenance of these controls. NIOSH researchers have often seen appropriate controls installed, but worker overexposures occurred because of the lack of proper maintenance of these controls." - NIOSHTIC-2
Download or read book NIOSH Publications Catalog FY 1986 FY 1997 written by National Institute for Occupational Safety and Health and published by . This book was released on 1998 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index Medicus written by and published by . This book was released on 2002 with total page 1568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book Handbook for Dust Control in Mining written by Fred N. Kissell and published by . This book was released on 2003 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improving dust control technology for U S mines written by John A. Breslin and published by . This book was released on 1982 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Best Practices for Dust Control in Coal Mining written by Department of Health and Human Services and published by CreateSpace. This book was released on 2013-10 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Respirable dust exposure has long been known to be a serious health threat to workers in many industries. In coal mining, overexposure to respirable coal mine dust can lead to coal workers' pneumoconiosis (CWP). CWP is a lung disease that can be disabling and fatal in its most severe form. In addition, miners can be exposed to high levels of respirable silica dust, which can cause silicosis, another disabling and/or fatal lung disease. Once contracted, there is no cure for CWP or silicosis. The goal, therefore, is to limit worker exposure to respirable dust to prevent development of these diseases. The passage of the Federal Coal Mine Health and Safety Act of 1969 established respirable dust exposure limits, dust sampling requirements for inspectors and mine operators, a voluntary x-ray surveillance program to identify CWP in underground coal miners, and a benefits program to provide compensation to affected workers and their families. The tremendous human and financial costs resulting from CWP and silicosis in the U.S. underground coal mine workforce are shown by the following statistics: • During 1970–2004, CWP was a direct or contributing cause of 69,377 deaths of U.S. underground coal mine workers. • During 1980–2005, over $39 billion in CWP benefits were paid to underground coal miners and their families. • Recent x-ray surveillance data for 2000–2006 show an increase in CWP cases. Nearly 8% of examined underground coal miners with 25 or more years of experience were diagnosed with CWP. • “Continuous miner operator” is the most frequently listed occupation on death certificates that record silicosis as the cause of death. In light of the ongoing severity of these lung diseases in coal mining, this handbook was developed to identify available engineering controls that can help the industry reduce worker exposure to respirable coal and silica dust. The controls discussed in this handbook range from long-utilized controls that have developed into industry standards to newer controls that are still being optimized. The intent was to identify the best practices that are available to control respirable dust levels in underground and surface coal mining operations. This handbook provides general information on the control technologies along with extensive references. In some cases, the full reference(s) will need to be consulted to gain in-depth information on the testing or implementation of the control of interest.
Download or read book Monitoring and Sampling Approaches to Assess Underground Coal Mine Dust Exposures written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-10-04 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal remains one of the principal sources of energy for the United States, and the nation has been a world leader in coal production for more than 100 years. According to U.S. Energy Information Administration projections to 2050, coal is expected to be an important energy resource for the United States. Additionally, metallurgical coal used in steel production remains an important national commodity. However, coal production, like all other conventional mining activities, creates dust in the workplace. Respirable coal mine dust (RCMD) comprises the size fraction of airborne particles in underground mines that can be inhaled by miners and deposited in the distal airways and gas-exchange region of the lung. Occupational exposure to RCMD has long been associated with lung diseases common to the coal mining industry, including coal workers' pneumoconiosis, also known as "black lung disease." Monitoring and Sampling Approaches to Assess Underground Coal Mine Dust Exposures compares the monitoring technologies and sampling protocols currently used or required by the United States, and in similarly industrialized countries for the control of RCMD exposure in underground coal mines. This report assesses the effects of rock dust mixtures and their application on RCMD measurements, and the efficacy of current monitoring technologies and sampling approaches. It also offers science-based conclusions regarding optimal monitoring and sampling strategies to aid mine operators' decision making related to reducing RCMD exposure to miners in underground coal mines.
Download or read book Proceedings of the Annual Institute on Mining Health Safety and Research written by and published by . This book was released on 2000 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Control of Respirable Coal Mine Dust Beckley West Virginia October 4 6 1983 written by and published by . This book was released on 1984 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Purpose of symposium: "To provide an open forum for labor, government, and other interested parties to exchange information on the control of respirable coal mine dust and to identify current problems and possible solutions."
Download or read book U S Bureau of Mines FY 1994 Annual Research Report SP 10 95 Environmental Technology Etc written by and published by . This book was released on with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Research Report written by United States. Bureau of Mines and published by . This book was released on with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dust Control Handbook for Industrial Minerals Mining and Processing written by Andrew B. Andrew B. Cecala and published by CreateSpace. This book was released on 2015-05-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the mining and processing of minerals, the mined ore undergoes a number of crushing, grinding, cleaning, drying, and product sizing operations as it is processed into a marketable commodity. These operations are highly mechanized, and both individually and collectively these processes can generate large amounts of dust. If control technologies are inadequate, hazardous levels of respirable dust may be liberated into the work environment, potentially exposing workers. Accordingly, federal regulations are in place to limit the respirable dust exposure of mine workers. Engineering controls are implemented in mining operations in an effort to reduce dust generation and limit worker exposure.
Download or read book Proceedings of the 15th North American Mine Ventilation Symposium written by Edmund Jong and published by . This book was released on 2015-07-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Best Practices for Dust Control in Metal Nonmetal Mining written by Department of Health and Human Services and published by CreateSpace. This book was released on 2013-10 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Respirable silica dust exposure has long been known to be a serious health threat to workers in many industries. Overexposure to respirable silica dust can lead to the development of silicosis— a lung disease that can be disabling and fatal in its most severe form. Once contracted, there is no cure for silicosis so the goal must be to prevent development by limiting a worker's exposure to respirable silica dust. In addition, the International Agency for Research on Cancer (IARC) has concluded that there is sufficient evidence to classify silica as a human carcinogen. For workers in the metal/nonmetal mining industry, the Mine Safety and Health Administration (MSHA) regulates and monitors exposure to respirable silica dust through personal dust sampling. Recent MSHA personal sampling results indicate that overexposures to respirable silica dust continue to occur for miners in metal/nonmetal mining operations. From 2004 to 2008, the percentages of samples that exceeded the applicable respirable dust standard for the different mining commodities were: • 12% for sand and gravel • 13% for stone • 18% for nonmetal • 21% for metal Of the 2,407 deaths attributed to silicosis in the United States from 1990–1999, employment information was available for 881 deaths. Metal/nonmetal mining was the industry recorded for over 15% of these 881 deaths, with mining machine operator the most frequently recorded occupation. In light of ongoing silica overexposures and reported silicosis deaths in metal/nonmetal miners, an ongoing threat to miners' health is evident. This handbook was developed to identify available engineering controls that can assist the industry in reducing worker exposure to respirable silica dust. The controls discussed in this handbook range from long-used controls which have developed into industry standards, to newer controls, which are still being optimized. The intent is to identify the “best practices” that are available for controlling respirable dust levels in underground and surface metal/nonmetal mining operations. This handbook provides general information on the control technologies along with extensive references. In some cases, the full reference(s) will need to be accessed to gain in-depth information on the testing or implementation of the control of interest.
Download or read book Safety and Health at Work written by and published by . This book was released on 1997 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
