Download or read book High Explosives Propellants Pyrotechnics written by Ernst-Christian Koch and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-01-18 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary contains 739 entries with about 1400 references to the primary literature. Details on the composition, performance, sensitivity and other pertinent properties of Energetic Materials such as High Explosives, Propellants, Pyrotechnics, as well as important ingredients such as Oxidizers, Fuels, Binders, and Modifiers are given and presented partly in over 180 tables with more than 240 structural formulas . In detail the dictionary gives elaborate descriptions of 460 Chemical Substances 170 Pyrotechnic Compositions 360 High Explosive and Propellant Formulations In addition, the basic physical and thermochemical properties of 435 pure substances (elements & compounds) typically occuring as ingredients or reaction products are given too. 150 Figures, schemes and diagrams explain Applications, Test methods, Scientific facilities, and finally Individuals closely tied with the development and investigation of Energetic Materials. The book is intended for readers with a technical or scientific background, active in governmental agencies, research institutes, trade and industry, concerned with the procurement, development, manufacture, investigation and use of Energetic Materials, such as High Explosives, Propellants, Pyrotechnics, Fireworks and Ammunition. The book serves both as a daily reference for the experienced as well as an introduction for the newcomer to the field.
Download or read book Explosives Propellants and Pyrotechnics written by Alan Bailey and published by Brassey's. This book was released on 1989 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Britisk lærebog til selvstudium i spræng- og fremdrivningsstoffer til militære formål, omfattende detonerende højeksplosiver, fremdrivningsstoffer og pyroteknika.
Download or read book High Energy Materials written by Jai Prakash Agrawal and published by John Wiley & Sons. This book was released on 2015-11-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an insider with over 40 years of high energy materials (HEMs) experience in academia, industry and defense organizations, this handbook and ready reference covers all important HEMs from the 1950s to the present with their respective properties and intended purposes. Written at an attainable level for professionals, engineers and technicians alike, the book provides a comprehensive view of the current status and suggests further directions for research and development. An introductory chapter on the chemical and thermodynamic basics allows the reader to become acquainted with the fundamental features of explosives, before moving on to the important safety aspects in processing, handling, transportation and storage of high energy materials. With its collation of results and formulation strategies hitherto scattered in the literature, this should be on the shelf of every HEM researcher and developer.
Download or read book Demystifying Explosives written by Sethuramasharma Venugopalan and published by Elsevier. This book was released on 2015-01-09 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demystifying Explosives: Concepts in High Energy Materials explains the basic concepts of and the science behind the entire spectrum of high energy materials (HEMs) and gives a broad perspective about all types of HEMs and their interrelationships. Demystifying Explosives covers topics ranging from explosives, deflagration, detonation, and pyrotechnics to safety and security aspects of HEMS, looking at their aspects, particularly their inter-relatedness with respect to properties and performance. The book explains concepts related to the molecular structure of HEMs, their properties, performance parameters, detonation and shock waves including explosives and propellants. The theory-based title also deals with important (safety and security) and interesting (constructive applications) aspects connected with HEMs and is of fundamental use to students in their introduction to these materials and applications. - Explains the concept of high energy materials in simple language and down-to-earth examples - Worked examples and problems are given wherever required - Demystifies the concept of explosives - Limited use of big and complex equations - Questions and Suggested Reading are given at the end of each chapter
Download or read book Green Energetic Materials written by Tore Brinck and published by John Wiley & Sons. This book was released on 2014-01-15 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents a detailed account of research and recent developments in the field of green energetic materials, including pyrotechnics, explosives and propellants. This area is attracting increasing interest in the community as it undergoes a transition from using traditional processes, to more environmentally-friendly procedures. The book covers the entire line of research from the initial theoretical modelling and design of new materials, to the development of sustainable manufacturing processes. It also addresses materials that have already reached the production line, as well as considering future developments in this evolving field.
Download or read book Organic Chemistry of Explosives written by Jai Prakash Agrawal and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Chemistry of Explosives is the first text to bring together the essential methods and routes used for the synthesis of organic explosives in a single volume. Assuming no prior knowledge, the book discusses everything from the simplest mixed acid nitration of toluene, to the complex synthesis of highly energetic caged nitro compounds. Reviews laboratory and industrial methods, which can be used to introduce aliphatic C-nitro, aromatic C-nitro, N-nitro, and nitrate ester functionality into organic compounds Discusses the advantages and disadvantages of each synthetic method or route, with scope, limitations, substrate compatibility and other important considerations Features numerous examples in the form of text, reaction diagrams, and tables.
Download or read book Chemistry of Pyrotechnics written by Chris Mocella and published by CRC Press. This book was released on 2010-12-23 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily driven by advancing technology and concerns for safety, advancement in the world of pyrotechnics and high-energy materials has exploded in the past 25 years. The promulgation of new government regulations places new and more stringent restrictions on the materials that may be used in energetic mixtures. These regulations now mandate numerous training programs, and initiate other actions, such as OSHA’s Process Safety Management standard, intended to eliminate accidents and incidents. Unfortunately, the US lacks an organized, broad-range academic program to cover the science and use of energetic materials and educate the next generation of pyrotechnicians. Designed as a bridge to allow a smooth and confident transition for personnel coming from a chemistry background into the practical world of explosives, Chemistry of Pyrotechnics: Basic Principles and Theory, Second Edition emphasizes basic chemical principles alongside practical, hands-on knowledge in the preparation of energetic mixtures. It examines the interactions between and adaptations of pyrotechnics to changing technology in areas such as obscuration science and low-signature flame emission. Much more than a simple how-to guide, the book discusses chemical and pyrotechnic principles, components of high-energy mixtures, and elements of ignition, propagation, and sensitivity. It offers heat compositions, including ignition mixes, delays, thermites, and propellants and investigates the production of smoke and sound as well as light and color. Promoting the growth and expansion of pyrotechnics as a science, Chemistry of Pyrotechnics: Basic Principles and Theory, Second Edition provides practitioners with the ability to apply chemical principles and logic to energetic materials and thereby make the field as productive, useful, and safe as possible.
Download or read book Explosives written by Rudolf Meyer and published by John Wiley & Sons. This book was released on 2016-03-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unrivaled, definitive reference for almost 40 years, this classic work on explosives is now in its seventh, completely revised and updated edition. Some 500 monographic entries, arranged alphabetically, consider the physicochemical properties, production methods, and safe applications of over 120 explosive chemicals. In addition, 70 fuels, additives, and oxidizing agents are discussed as well as the corresponding test methods. Trade, company, and military short names are provided for many of the materials listed, while further key features include a combined index and glossary with terms and abbreviations in English, French, and German, as well as conversion tables and many literature references. Finally, this indispensable source also contains safety data and transport regulations.
Download or read book High Explosives and Propellants written by S. Fordham and published by Elsevier. This book was released on 2013-10-22 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.
Download or read book Nanothermites written by Eric Lafontaine and published by John Wiley & Sons. This book was released on 2016-07-14 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent introduction of the “nano” dimension to pyrotechnics has made it possible to develop a new family of highly reactive substances: nanothermites. These have a chemical composition that is comparable to that of thermites at submillimeter or micrometric granulometry, but with a morphology having a much increased degree of homogeneity. This book discusses the methods of preparation of these energetic nanomaterials, their specific properties, and the different safety aspects inherent in their manipulation.
Download or read book Explosives Engineering written by Paul W. Cooper and published by John Wiley & Sons. This book was released on 2018-07-19 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text, and Cooper's companion introductory text ('Introduction to the Technology of Explosives'), serve the same markets as the successful explosives reference by Meyer, now in its 4th edition. VCH also published the International Journal of Propellants, Explosives, and Pyrotechnics. The resulting package would give VCH the major presence in the field. This text presents the basic technologies used in the engineering of explosives and explosive systems, i.e., chemistry, burning, detonation, shock waves, initiation theories, scaling. The book is written for upper-division undergraduate or graduate-level scientists and engineers, and assumes a good grasp of basic physics, chemistry, mechanics and mathematic through calculus. It is based on lecture notes used for graduate courses at the Dept. of Energy Laboratories, and could serve as a core text for a course at schools of mining or military engineering. The intent of the book is to provide the engineer or scientist in the field with an understanding of the phenomena involved and the engineering tools needed to solve/ design/ analyze a broad range of real problems.
Download or read book Explosives Propellants and Pyrotechnics written by A. Bailey and published by Potomac Books. This book was released on 2000 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and updated to take account of the most recent developments in the field, this useful text explains today''s explosives from simple theory to practical use and considers future developments.'
Download or read book Chemistry of High Energy Materials written by Thomas M. Klapötke and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-08-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4th revised edition expands on the basic chemistry of high energy materials of the precious editions and examines new research developments, including hydrodynamics and ionic liquids. Applications in military and civil fields are discussed. This work is of interest to advanced students in chemistry, materials science and engineering, as well as to all those working in defense technology.
Download or read book Introduction to the Technology of Explosives written by Paul W. Cooper and published by John Wiley & Sons. This book was released on 1997-01-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Technology of Explosives Paul W. Cooper and Stanley R. Kurowski Introduction to the Technology of Explosives is a clear and concise survey of the technologies and physical processes involved in explosive phenomena. The book is intended to provide the worker new to the field with sufficient background to understand problems that may arise and to interact intelligently with specialists in the field. The book covers the fundamentals of the chemistry of explosives; the mechanics of burning; sound, shock, and detonation; initiation and initiators; scaling in design and analysis; and off-the-shelf explosive devices. It provides the basic calculational skills needed to solve simple, first-order engineering design problems, and emphasizes the crucial importance of safety considerations. The book contains a broad range of data on explosive materials, and their properties and behavior, along with extensive lists of useful references. Example problems with solutions are provided in each technical area, as are descriptions and analysis of a wide variety of explosive devices. The book concludes with a thorough and comprehensive description of regulatory requirements for the classification, transportation, and storage of explosives, and an extensive guide to explosives safety in plant and test facilities. This book will be of interest to explosives technicians and engineers, government regulators, crime and accident scene investigators, and instructors in military, police, and FBI bomb schools.
Download or read book Energetic Compounds written by Mohammad Hossein Keshavarz and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-05-05 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses methods for the assessment of energetic compounds through heat of detonation, detonation pressure, velocity and temperature, Gurney energy and power. The authors focus on the detonation pressure and detonation velocity of non-ideal aluminized energetic compounds. This 2nd Edition includes an updated and improved presentation of simple, reliable methods for the design, synthesis and development of novel energetic compounds.
Download or read book Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-05-19 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvised explosive devices (IEDs) are a type of unconventional explosive weapon that can be deployed in a variety of ways, and can cause loss of life, injury, and property damage in both military and civilian environments. Terrorists, violent extremists, and criminals often choose IEDs because the ingredients, components, and instructions required to make IEDs are highly accessible. In many cases, precursor chemicals enable this criminal use of IEDs because they are used in the manufacture of homemade explosives (HMEs), which are often used as a component of IEDs. Many precursor chemicals are frequently used in industrial manufacturing and may be available as commercial products for personal use. Guides for making HMEs and instructions for constructing IEDs are widely available and can be easily found on the internet. Other countries restrict access to precursor chemicals in an effort to reduce the opportunity for HMEs to be used in IEDs. Although IED attacks have been less frequent in the United States than in other countries, IEDs remain a persistent domestic threat. Restricting access to precursor chemicals might contribute to reducing the threat of IED attacks and in turn prevent potentially devastating bombings, save lives, and reduce financial impacts. Reducing the Threat of Improvised Explosive Device Attacks by Restricting Access to Explosive Precursor Chemicals prioritizes precursor chemicals that can be used to make HMEs and analyzes the movement of those chemicals through United States commercial supply chains and identifies potential vulnerabilities. This report examines current United States and international regulation of the chemicals, and compares the economic, security, and other tradeoffs among potential control strategies.
Download or read book The Chemistry of Explosives written by Jacqueline Akhavan and published by Royal Society of Chemistry. This book was released on 2004 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and expanded to reflect new developments in the field, this book outlines the basic principles required to understand the chemical processes of explosives. The Chemistry of Explosives provides an overview of the history of explosives, taking the reader to future developments. The text on the classification of explosive materials contains much data on the physical parameters of primary and secondary explosives. The explosive processes of deflagration and detonation, including the theory of 'hotspots' for the detonation process, are introduced and many examples are provided in the detailed description on the thermochemistry of explosives. New material includes coverage of the latest explosive compositions, such as high temperature explosives, nitrocubanes, energetic polymers, plasticizers and insensitive munitions (IM). This concise, readable book is ideal for 'A' level students and new graduates with no previous knowledge of explosive materials. With detailed information on a vast range of explosives in tabular form and an extensive bibliography, this book will also be useful to anyone needing succinct information on the subject.
