EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Explosive Bonding

Download or read book Explosive Bonding written by V. D. Linse and published by . This book was released on 1967 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes basic mechanics of the process, practices of those in the field, metal combinations and configurations that have been bonded, and applications.

Book Explosive Welding  Forming and Compaction

Download or read book Explosive Welding Forming and Compaction written by T.Z. Blazynski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last two decades have seen a steady and impressive development, and eventual industrial acceptance, of the high energy-rate manufact turing techniques based on the utilisation of energy available in an explo sive charge. Not only has it become economically viable to fabricate complex shapes and integrally bonded composites-which otherwise might not have been obtainable easily, if at all-but also a source of reasonably cheap energy and uniquely simple techniques, that often dispense with heavy equipment, have been made available to the engineer and applied scientist. The consolidation of theoretical knowledge and practical experience which we have witnessed in this area of activity in the last few years, combined with the growing industrial interest in the explosive forming, welding and compacting processes, makes it possible and also opportune to present, at this stage, an in-depth review of the state of the art. This book is a compendium of monographic contributions, each one of which represents a particular theoretical or industrial facet of the explosive operations. The contributions come from a number of practising engineers and scientists who seek to establish the present state of knowledge in the areas of the formation and propagation of shock and stress waves in metals, their metallurgical effects, and the methods of experimental assessment of these phenomena.

Book High Explosives and Propellants

Download or read book High Explosives and Propellants written by S. Fordham and published by Elsevier. This book was released on 2013-10-22 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Explosives and Propellants, Second Edition is a four-part book classified into High Explosives, Blasting Accessories, Application of High Explosives, and Deflagrating and Propellent Explosives. Part I, High Explosives, centers on the general principles, manufacture, design, and assessment of this type of explosive. Part II, Blasting Accessories, describes initiation of explosives and different types of detonators. Part III, Application of High Explosives, deals with the commercial and military applications of high explosives. The last part, Deflagrating and Propellent Explosives, discusses the manufacture, properties, design, and application of propellants.

Book Metallurgical and Ceramic Protective Coatings

Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.

Book Explosive Welding

Download or read book Explosive Welding written by B.A. Greenberg and published by CRC Press. This book was released on 2019-08-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference explores explosion welding, a high intensity, transient impact that achieves metal compounds not obtainable otherwise. Electron microscopy images cover the structure of numerous welded joints including titanium–orthorhombic titanium aluminide, copper–tantalum, aluminum–tantalum, iron–silver, steel–steel, and copper–titanium. These weldable pairs have different solubility than their initial elements. The authors present various processes and structures including granulating fragmentation, cusps, splashes, and quasi-wave interface. Specific risk zones for chemical and petrochemical (coke chamber) reactors are probed and suggestions offered. Key Features: Offers new theories about explosion welding processes and structures Investigates dozens of weldable pairs with differing solubility from initial elements Studies both hetero- and homogeneous pairs Explores welded joints with flat, wavy and quasi-wavy separation boundaries Observes irregularities of the separation surface relief observing asperities and splashes and their transformation under intensified welding modes Unveils a new type of fragmentation under explosion welding Explosive Welding: Processes and Structures is a valuable resource for a wide range of experts involved in explosion welding, engineers, as well as graduate and postgraduate students.

Book Explosives

    Book Details:
  • Author : Rudolf Meyer
  • Publisher : John Wiley & Sons
  • Release : 2016-03-18
  • ISBN : 3527689591
  • Pages : 451 pages

Download or read book Explosives written by Rudolf Meyer and published by John Wiley & Sons. This book was released on 2016-03-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unrivaled, definitive reference for almost 40 years, this classic work on explosives is now in its seventh, completely revised and updated edition. Some 500 monographic entries, arranged alphabetically, consider the physicochemical properties, production methods, and safe applications of over 120 explosive chemicals. In addition, 70 fuels, additives, and oxidizing agents are discussed as well as the corresponding test methods. Trade, company, and military short names are provided for many of the materials listed, while further key features include a combined index and glossary with terms and abbreviations in English, French, and German, as well as conversion tables and many literature references. Finally, this indispensable source also contains safety data and transport regulations.

Book Engineering Tribology

Download or read book Engineering Tribology written by Gwidon W. Stachowiak and published by Elsevier. This book was released on 2001 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanisms of wear, friction and lubrication are comprehensively described in an accessible manner that is designed to be helpful to non-specialists. The control of wear is given extensive treatment with a thorough discussion of lubricant additives, solid lubricants and surface coatings. The effectiveness of coatings in suppressing specific forms of wear is described together with the methods of coating deposition. More than 1000 references are provided to give the reader access to more specialized information if required.

Book Explosive Welding of Metals and Its Application

Download or read book Explosive Welding of Metals and Its Application written by Bernard Crossland and published by Oxford University Press, USA. This book was released on 1982 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Explosion Shock Waves and High Strain Rate Phenomena

Download or read book Explosion Shock Waves and High Strain Rate Phenomena written by K. Hokamoto and published by Materials Research Forum LLC. This book was released on 2019-08-20 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the papers presented at the 6th international conference on Explosion, Shock Wave and High Strain-Rate Phenomena (ESHP). Topics covered include: Advanced Manufacturing under Impact/Shock Loading, Detonation of High Pressure Flammable Gas in Closed Spaces, High Strain-Rate Behaviour of Auxetic Cellular Structures, Underwater Shock Waves Generation, Magnetic Pressure Welding of Aluminum Sheets, Shock Synthesis of Zirconium Oxides, Impact Joining of Dissimilar Metals, High-Speed Oblique Collision of Metals, Dynamic Behavior of Dislocation Wall Structures, Tensile Strength of Rock at High Strain Rates, Fiber Reinforced Mortar, Impact Analysis of Carbon Fiber Reinforced Polymer, Explosive Welding , Underwater Explosive Welding , Making Ultrafine Explosives, Aluminum-Steel Explosive Cladding, Explosively Cladded Aluminum Hybrid Composites, Explosive Clads with Interlayers.

Book Library of Congress Subject Headings

Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2013 with total page 1708 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Heat Exchanger Design Handbook  Second Edition

Download or read book Heat Exchanger Design Handbook Second Edition written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect current advances in heat exchanger technology, Heat Exchanger Design Handbook, Second Edition includes enhanced figures and thermal effectiveness charts, tables, new chapter, and additional topics––all while keeping the qualities that made the first edition a centerpiece of information for practicing engineers, research, engineers, academicians, designers, and manufacturers involved in heat exchange between two or more fluids. See What’s New in the Second Edition: Updated information on pressure vessel codes, manufacturer’s association standards A new chapter on heat exchanger installation, operation, and maintenance practices Classification chapter now includes coverage of scrapped surface-, graphite-, coil wound-, microscale-, and printed circuit heat exchangers Thorough revision of fabrication of shell and tube heat exchangers, heat transfer augmentation methods, fouling control concepts and inclusion of recent advances in PHEs New topics like EMbaffle®, Helixchanger®, and Twistedtube® heat exchanger, feedwater heater, steam surface condenser, rotary regenerators for HVAC applications, CAB brazing and cupro-braze radiators Without proper heat exchanger design, efficiency of cooling/heating system of plants and machineries, industrial processes and energy system can be compromised, and energy wasted. This thoroughly revised handbook offers comprehensive coverage of single-phase heat exchangers—selection, thermal design, mechanical design, corrosion and fouling, FIV, material selection and their fabrication issues, fabrication of heat exchangers, operation, and maintenance of heat exchangers —all in one volume.

Book NASA Technical Memorandum

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1983 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Library of Congress Subject Headings

Download or read book Library of Congress Subject Headings written by Library of Congress. Office for Subject Cataloging Policy and published by . This book was released on 1991 with total page 1580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Library of Congress Subject Headings

Download or read book Library of Congress Subject Headings written by Library of Congress. Cataloging Policy and Support Office and published by . This book was released on 2001 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Science and Practice of Welding  Volume 2

Download or read book The Science and Practice of Welding Volume 2 written by A. C. Davies and published by Cambridge University Press. This book was released on 1992 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive survey of the welding methods in use today provides information on all types of welding methods and tools, including manual metal arc welding, gas shielded metal arc welding, tungsten inert gas shielded welding, plasma arc, and cutting.

Book Advanced Noncontact Cutting and Joining Technologies

Download or read book Advanced Noncontact Cutting and Joining Technologies written by Rasheedat Modupe Mahamood and published by Springer. This book was released on 2018-03-02 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illuminates advanced cutting and joining processes, what they are used for, and the capabilities of these manufacturing techniques, especially in micro- and nano-fabrication. The authors illustrate the use of water jets and lasers that can be used to cut highly complex shapes without leaving burrs of heat affected zones, as well as friction stir welding processes that were not possible in the past. Rounding out their examination, the authors describe in detail the use of additive manufacturing for fabrication of micro and nano-scale components and the direction of future research. Incorporating many examples from industry, the book is ideal for professional engineers, technicians, and fabrication managers in multiple industries. Maximizes understanding of advanced manufacturing processes and their capabilities, as well as the limitations of each of these technologies; Explains use of contactless manufacturing processes in applications such as electronics and sensor fabrication; Serves as a ready reference on the latest cutting and joining technologies, including those at the micro- and nano-scale.

Book Tool and Manufacturing Engineers Handbook  Quality Control and Assembly

Download or read book Tool and Manufacturing Engineers Handbook Quality Control and Assembly written by Thomas J. Drozda and published by Society of Manufacturing Engineers. This book was released on 1983 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Control and Assembly helps you meet today's competitive pressures for measuring quality, making continuous quality improvements, streamlining assembly, and making the transition to automated assembly systems and applications.