Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.

Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.

Download or read book Methods of Seawater Analysis written by Klaus Grasshoff and published by John Wiley & Sons. This book was released on 2009-07-30 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the book first appeared in 1976, Methods of Seawater Analysis has found widespread acceptance as a reliable and detailed source of information. Its second extended and revised edition published in 1983 reflected the rapid pace of instrumental and methodological evolution in the preceding years. The development has lost nothing of its momentum, and many methods and procedures still suffering their teething troubles then have now matured into dependable tools for the analyst. This is especially evident for trace and ultra-trace analyses of organic and inorganic seawater constituents which have diversified considerably and now require more space for their description than before. Methods to determine volatile halocarbons, dimethyl sulphide, photosynthetic pigments and natural radioactive tracers have been added as well as applications of X-ray fluorescence spectroscopy and various electrochemical methods for trace metal analysis. Another method not previously described deals with the determination of the partial pressure of carbon dioxide as part of standardised procedures to describe the marine CO2 system.

Download or read book Microgravity Combustion written by Howard D. Ross and published by Elsevier. This book was released on 2001-09-03 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to understanding combustion, the burning of a substance that produces heat and often light, in microgravity environments-i.e., environments with very low gravity such as outer space. Readers are presented with a compilation of worldwide findings from fifteen years of research and experimental tests in various low-gravity environments, including drop towers, aircraft, and space.Microgravity Combustion is unique in that no other book reviews low- gravity combustion research in such a comprehensive manner. It provides an excellent introduction for those researching in the fields of combustion, aerospace, and fluid and thermal sciences.* An introduction to the progress made in understanding combustion in a microgravity environment* Experimental, theoretical and computational findings of current combustion research* Tutorial concepts, such as scaling analysis* Worldwide microgravity research findings

Download or read book The John Zink Combustion Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2001-03-27 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the length of time it has been around, its importance, and vast amounts of research, combustion is still far from being completely understood. Industrial applications of combustion add environmental, cost, and fuel consumption issues to its fundamental complexity, and the process and power generation industries in particular present their o

Download or read book Handbook of Thermal Management of Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-01 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook deals with the vast subject of thermal management of engines and vehicles by applying the state of the art research to diesel and natural gas engines. The contributions from global experts focus on management, generation, and retention of heat in after-treatment and exhaust systems for light-off of NOx, PM, and PN catalysts during cold start and city cycles as well as operation at ultralow temperatures. This book will be of great interest to those in academia and industry involved in the design and development of advanced diesel and CNG engines satisfying the current and future emission standards.

Download or read book Approaches for Clean Combustion in Gas Turbines written by Medhat A. Nemitallah and published by Springer Nature. This book was released on 2020-03-24 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the development of novel combustion approaches and burner designs for clean power generation in gas turbines. It shows the reader how to control the release of pollutants to the environment in an effort to reduce global warming. After an introduction to global warming issues and clean power production for gas turbine applications, subsequent chapters address premixed combustion, burner designs for clean power generation, gas turbine performance, and insights on gas turbine operability. Given its scope, the book can be used as a textbook for graduate-level courses on clean combustion, or as a reference book to accompany compact courses for mechanical engineers and young researchers around the world.

Download or read book Combustion Engineering written by Kenneth W. Ragland and published by CRC Press. This book was released on 2011-05-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Second Edition maintains the same goal as the original: to present the fundamentals of combustion science with application to today's energy challenges. Using combustion applications to reinforce the fundamentals of combustion science, this text provides a uniquely accessible introduction to combustion for undergraduate stud

Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.

Download or read book Underbalanced Drilling Limits and Extremes written by Bill Rehm and published by Elsevier. This book was released on 2013-11-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology

Download or read book Advanced Drying Technologies written by Tadeusz Kudra and published by CRC Press. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents Drying Breakthroughs for an Array of MaterialsDespite being one of the oldest, most energy-intensive unit operations, industrial drying is perhaps the least scrutinized technique at the microscopic level. Yet in the wake of today's global energy crisis, drying research and development is on the rise. Following in the footsteps of the widel

Download or read book Effects of Surface Chemistry on Hot Corrosion Life written by and published by . This book was released on 1985 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Industrial Mixing written by Suzanne M. Kresta and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.

Download or read book Steam written by Babcock & Wilcox Company and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1907, this classic technical manual provides a detailed overview of steam power generation and utilization, as well as a catalog of the equipment and products manufactured by the Babcock & Wilcox Company. Written for engineers and technicians, this book remains a valuable reference for anyone interested in the history and technology of steam power. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Heat Transfer in Gas Turbine Systems written by Richard J. Goldstein and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores recent developments in heat transfer and thermal control applied to modern high-temperature gas turbine systems. It examines experimental results and techniques computational studies and methods and design recommendations. Aspects of heat transfer in rotating machinery are studied as well as thermal aspects of other sections of the turbine (e.g. the compressor). Proceedings of an August 2000 conference.

Download or read book Chlorine and Hydrogen Chloride written by Assembly of Life Sciences (U.S.). Committee on Medical and Biologic Effects of Environmental Pollutants and published by . This book was released on 1976 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 INTRODUCTION. 2 SOURCERS OF CHLORINE AND HYDROGEN CHLORIDE. 3 CONSUMPTION OF CHLORINE AND HYDROGEN CHLORIDE. 4 ATMOSPHERIC CHEMISTRY OF CHLORINE COMPOUNDS. 5 EFFECTS OF CHLORINE AND HYDROGEN CHLORIDE ON MAN AND ANIMALS. 6 EFFECTS OF CHLORINE AND HYDROGEN CHLORIDE ON VEGETATION. 7 PROPERTY DAMAGE AND PUBLIC NUISANCE. 8 SAFETY IN USE AND HANDLING OF CHLORINE AND ANHYDROUS HYDROGEN CHLORIDE.

Download or read book A Gallery of Fluid Motion written by M. Samimy and published by Cambridge University Press. This book was released on 2004-01-12 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The visualization of fluid flow has played a major role in the development of fluid dynamics and its applications, from the evolution of flight to tracking weather, and understanding the flow of blood. The Fluid Dynamics Division of the American Physical Society sponsors an annual competition for outstanding images of fluid flow. This volume includes a selection of winners from 1985 to the present. Each image is accompanied by some explanatory text, making the volume an important acquisition for anyone involved in fluid flow research.