Download or read book Experimental theoretical Comparisons of the Turbulence in the Scrape off layers of Alcator C Mod DIII D and NSTX written by James L. Terry and published by . This book was released on 2002 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intermittent turbulent transport in the scrape-off-layers of Alcator C-Mod, DIII-D, and NSTX is studied experimentally. On DIII-D the fluctuations of both density and temperature have strongly non-Gaussian statistics, and events with amplitudes above 10 times the mean level are responsible for large fractions of the net particle and heat transport, indicating the importance of turbulence on the transport. In C-Mod and NSTX the turbulence is imaged with a very high density of spatial measurements. The 2-D structure and dynamics of emission from a localized gas puff are observed, and intermittent features (also sometimes called 3blobs4) are typically seen. On DIII-D the turbulence is imaged using BES and similar intermittent features are seen. The dynamics of these intermittent features are discussed. The experimental observations are compared with numerical simulations of edge turbulence. The electromagnetic turbulence in a 3-D geometry is computed using non-linear plasma fluid equations. The wavenumber spectra in the poloidal dimension of the simulations are in reasonable agreement with those of the C-Mod experimental images once the response of the optical system is accounted for. The resistive ballooning mode is the dominant linear instability in the simulations.
Download or read book Observations of the Turbulence in the Scrape off layers of Alcator C Mod and NSTX and Comparisons with Simualtion sic written by James L. Terry and published by . This book was released on 2002 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intermittent turbulent transport in the scrape-off-layer of Alcator C-Mod and NSTX is studied experimentally by imaging with a very high density of spatial measurements. The 2-D structure and dynamics of emission from a localized gas puff are observed, and intermittent features (also sometimes called "filaments" or "blobs") are typically seen. The characteristics of the spatial structure of the turbulence and their relationship to the time-averaged SOL profiles are discussed. The experimental observations are compared with 3-D non-linear numerical simulations of edge turbulence. Radial profiles of the poloidal wavenumber spectra and the poloidal scale length from the simulations are in reasonable agreement with those obtained from the experimental images, once the response of the optical system is accounted for. The resistive ballooning mode is the dominant linear instability in the simulations. The ballooning character of the turbulence is also consistent with fluctuation measurements made at the inboard and outboard midplane, where normalized fluctuation levels are found to be about ten times smaller on the inboard side. For discharges near the density limit, turbulent structures are seen on closed flux surfaces. Keywords: turbulence; edge plasma; fluctuations; transport phenomena; resistive instabilities.
Download or read book Comparison of Scrape off Layer Turbulence in Alcator C Mod with Three Dimensional Gyrofluid Computations written by and published by . This book was released on 2009 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes quantitative comparisons between turbulence measured in the scrape-off layer (SOL) of Alcator C-Mod [S. Scott, A. Bader, M. Bakhtiari et al., Nucl. Fusion 47, S598 (2007)] and three dimensional computations using electromagnetic gyrofluid equations in a two-dimensional tokamak geometry. These comparisons were made for the outer midplane SOL for a set of inner-wall limited, near-circular Ohmic plasmas. The B field and plasma density were varied to assess gyroradius and collisionality scaling. The poloidal and radial correlation lengths in the experiment and computation agreed to within a factor of 2 and did not vary significantly with either B or density. The radial and poloidal propagation speeds and the frequency spectra and poloidal k-spectra also agreed fairly well. However, the autocorrelation times and relative Da fluctuation levels were higher in the experiment by more than a factor of 2. Possible causes for these disagreements are discussed. 2009 American Institute of Physics.
Download or read book Energy and Water Development Appropriations for 2011 Part 3 February 2010 111 2 Hearings written by and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy and Water Development Appropriations for 2011 Dept of Energy fiscal year 2011 justifications cont written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2010 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparison of 3D Flux driven Scrape off Layer Turbulence Simulations with Gas puff Imaging of Alcator C Mod Inner wall Limited Discharges written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Edge Turbulence Imaging on NSTX and Alcator C mod written by S. J. Zweben and published by . This book was released on 2002 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Fusion written by and published by . This book was released on 2009 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reduced Simulations of Scrape off layer Turbulence written by Thomas Nicholas and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.
Download or read book The Plasma Boundary of Magnetic Fusion Devices written by P.C Stangeby and published by CRC Press. This book was released on 2000-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plasma Boundary of Magnetic Fusion Devices introduces the physics of the plasma boundary region, including plasma-surface interactions, with an emphasis on those occurring in magnetically confined fusion plasmas. The book covers plasma-surface interaction, Debye sheaths, sputtering, scrape-off layers, plasma impurities, recycling and control, 1D and 2D fluid and kinetic modeling of particle transport, plasma properties at the edge, diverter and limiter physics, and control of the plasma boundary. Divided into three parts, the book begins with Part 1, an introduction to the plasma boundary. The derivations are heuristic and worked problems help crystallize physical intuition, which is emphasized throughout. Part 2 provides an introduction to methods of modeling the plasma edge region and for interpreting computer code results. Part 3 presents a collection of essays on currently active research hot topics. With an extensive bibliography and index, this book is an invaluable first port-of-call for researchers interested in plasma-surface interactions.
Download or read book Benchmarking Nonlinear Turbulence Simulations on Alcator C Mod written by M. H. Redi and published by . This book was released on 2004 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparison of Edge Turbulence Velocity Analysis Techniques Using Gas Puff Imaging Data on Alcator C Mod written by Jennifer Marie Sierchio and published by . This book was released on 2014 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, two methods for analyzing data from the Gas Puff Imaging diagnostic on Alcator C-Mod have been used. One uses temporal and spatial Fourier analysis to obtain wavenumber-frequency spectra, from which a phase velocity is computed [1, 2]. The other is based on time-delay cross-correlation of successive images used to track the motion of discrete emission structures [3, 4]. Several Gas-Puff-Imaging experiments were conducted to obtain data taken using the GPI Phantom Camera. The analysis of and results from these data are discussed in [3]. The results showed that the tracking time-delay-estimation technique found poloidal velocity magnitudes in the 0.1-1.4 km/sec range. However, independent examination of these data using the Fourier analysis yielded magnitudes up to a factor of 10 larger for the same data, and sometimes even disagreed with the direction of motion found. To understand the reasons for these discrepancies, we designed and generated synthetic data that mimics the real data. The user inputs the velocities, sizes, intensities, and distributions of the synthetic emission structures. We have used the synthetic data to test each code rigorously for strengths, weaknesses, and weighting. We have found that the Fourier analysis perfectly returns the correct poloidal velocity when there is no radial velocity component present. We have found that the tracking TDE analysis weights low frequency, low wavenumber features most heavily since they are typically the most intense, but systematically returns a smaller velocity than expected due to issues associated with averaging. After adjusting for these issues, the tracking TDE code now returns the correct value of the poloidal and radial velocities to within 10% for synthetic data as long as there is only one velocity present in the synthetic simulation. We applied these corrections to the analysis of the real data, and found that the measurements changed little in most cases. We then examined, in detail, the Fourier-analysis-derived "conditional" spectra for each shot, and determined that the likely causes for the discrepancies are due either to multiple velocities with emission structures moving in opposite directions in the same field of view or to non-zero "dispersion" in which lower-frequency/lower-wavenumber features are moving with one phase velocity and higher-frequency/higher-wavenumber features are moving with a different phase velocity. In a couple of cases, there may be a radial component in the actual images that may affect the poloidal velocity measurement for the Fourier analysis. Accounting for these explanations, we believe that we have resolved the discrepancies in many cases, and can explain it in the others.
Download or read book Experimental and Theoretical Turbulent Boundary Layer Development in a Mach 4 4 Water cooled Conical Nozzle written by Donald R. Boldman and published by . This book was released on 1969 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bringing Fusion to the U S Grid written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-11-17 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fusion energy offers the prospect of addressing the nation's energy needs and contributing to the transition to a low-carbon emission electrical generation infrastructure. Technology and research results from U.S. investments in the major fusion burning plasma experiment known as ITER, coupled with a strong foundation of research funded by the Department of Energy (DOE), position the United States to begin planning for its first fusion pilot plant. Strong interest from the private sector is an additional motivating factor, as the process of decarbonizing and modernizing the nation's electric infrastructure accelerates and companies seek to lead the way. At the request of DOE, Bringing Fusion to the U.S. Grid builds upon the work of the 2019 report Final Report of the Committee on a Strategic Plan for U.S. Burning Plasma Research to identify the key goals and innovations - independent of confinement concept - that are needed to support the development of a U.S. fusion pilot plant that can serve as a model for producing electricity at the lowest possible capital cost.
Download or read book Iter Physics written by C Wendell Horton, Jr and published by World Scientific. This book was released on 2015-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of a vast and clean source of thermal power drove physics research for over fifty years and has finally come to collimation with the international consortium led by the European Union and Japan, with an agreement from seven countries to build a definitive test of fusion power in ITER. It happened because scientists since the Manhattan project have envisioned controlled nuclear fusion in obtaining energy with no carbon dioxide emissions and no toxic nuclear waste products.This large toroidal magnetic confinement ITER machine is described from confinement process to advanced physics of plasma-wall interactions, where pulses erupt from core plasma blistering the machine walls. Emissions from the walls reduce the core temperature which must remain ten times hotter than the 15 million degree core solar temperature to maintain ITER fusion power. The huge temperature gradient from core to wall that drives intense plasma turbulence is described in detail.Also explained are the methods designed to limit the growth of small magnetic islands, the growth of edge localized plasma plumes and the solid state physics limits of the stainless steel walls of the confinement vessel from the burning plasma. Designs of the wall coatings and the special 'exhaust pipe' for spent hot plasma are provided in two chapters. And the issues associated with high-energy neutrons — about 10 times higher than in fission reactions — and how they are managed in ITER, are detailed.
Download or read book Images of Edge Turbulence in NSTX written by S. J. Zweben and published by . This book was released on 2004 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
