Download or read book Experimental Study of the Structure and Dynamics of Cavitating Flows written by Guangjian Zhang and published by Scientific Research Publishing, Inc. USA. This book was released on 2023-11-06 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cavitation refers to a distinctive occurrence within liquid flows where there is a phase change process involving the rapid transformation of liquid into vapour in regions of low pressure, followed by collapsing or implosion when pressure rises again. The study of cavitation dates back to the late 19th century. While the term “cavitation” was originally coined by R. E. Froude and first documented by Barnaby and Thornycroft in 1895, the concept had been speculated upon much earlier by L. Euler in his 1754 theory on water turbines. However, the phenomenon of cavitation was initially observed and examined by Barnaby and Parsons in 1893. They identified that the formation of vapour bubbles on propeller blades had led to the failure of the sea trial of the British high-speed warship HMS Daring in 1885. In 1895, Parsons established the first water tunnel dedicated to cavitation research, revealing the connection between cavitation and propeller damage. The theoretical groundwork for cavitation research was laid by Rayleigh in 1917, as he successfully addressed the collapse of an empty cavity within a substantial liquid mass. Since then, numerous research work has been published on cavitating flow.
Download or read book Jets Wakes and Cavities written by Zarantonello Eduardo H. and published by Elsevier. This book was released on 2012-12-02 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Mathematics and Mechanics, Volume 2: Jets, Wakes, and Cavities provides a systematic discussion of jets, wakes, and cavities. This book focuses on the general aspects of ideal fluid theory and examines the engineering applications of fluid dynamics. Organized into 15 chapters, this volume starts with an overview of the different types of jets and explores the atomization of jets in carburetors in connection with gasoline engine design. This text then emphasizes the formal treatment of special flows and examines the flows that are bounded by flat plates and free streamlines. Other chapters consider the flows that are bounded by the cavity behind a symmetric wedge. This book discusses as well the intuitive momentum and similarity considerations. The final chapter deals with several surprising physical complications. Mathematician, physicists, engineers, and readers interested in the fields of applied mathematics, experimental physics, hydraulics, and aeronautics will find this book extremely useful.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Dynamics of Cavitation and Cavitating Turbopumps written by Luca d'Agostino and published by Springer Science & Business Media. This book was released on 2008-04-20 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the fluid dynamics of cavitation with special reference to high power density turbopumps, where it represents the major source of performance and life degradation. While covering the more fundamental aspects of cavitation and the main kinds of cavitating flows, there is focus on the hydrodynamics and instabilities of cavitating turbopumps. The book also illustrates the alternative approaches for modeling and engineering simulation of cavitating flows.
Download or read book Liutex and Third Generation of Vortex Identification written by Yiqian Wang and published by Springer Nature. This book was released on 2023-03-21 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings highlights the applications of the newly introduced physical quantity Liutex in hydrodynamics and aerodynamics. Liutex is used to represent the fascinating rotational motion of fluids, i.e., the vortex. Ubiquitously seen in nature and engineering applications, the definition of vortices has been elusive. The Liutex vector provides a unique and systematic description of vortices. The proceedings collects papers presented in the invited workshop "Liutex and Third Generation of Vortex Identification for Engineering Applications" from Aerospace and Aeronautics World Forum 2021. The papers in this book cover both the theoretical aspects of Liutex and many applications in hydrodynamics and aerodynamics. The proceedings is a good reference for researchers in fluid mechanics who are interested in learning about the wide scope of applications of Liutex and using it to develop a new understanding of their research subjects.
Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.
Download or read book Engineering Design Applications II written by Andreas Öchsner and published by Springer. This book was released on 2019-06-27 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an update on recent developments in modern engineering design. Different engineering disciplines, such as mechanical, materials, computer and process engineering, provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by the interaction between various disciplines and a strong shift to computer-based approaches where only a few experiments are conducted for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also linked to environmental demands. In the transportation industry (e.g. automotive or aerospace), the demand for higher fuel efficiency is related to reduced operational costs and less environmental damage. One way to fulfil such requirements is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.
Download or read book Design Simulation and Optimization of Hydraulic Machinery written by Ling Zhou and published by Frontiers Media SA. This book was released on 2022-08-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Cavitation written by Jean-Pierre Franc and published by Springer Science & Business Media. This book was released on 2006-01-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book treats cavitation, which is a unique phenomenon in the field of hyd- dynamics, although it can occur in any hydraulic machinery such as pumps, propellers, artificial hearts, and so forth. Cavitation is generated not only in water, but also in any kind of fluid, such as liquid hydrogen. The generation of cavitation can cause severe damage in hydraulic machinery. Therefore, the prevention of cavitation is an important concern for designers of hydraulic machinery. On the contrary, there is great potential to utilize cavitation in various important applications, such as environmental protection. There have been several books published on cavitation, including one by the same authors. This book differs from those previous ones, in that it is both more physical and more theoretical. Any theoretical explanation of the cavitation phenomenon is rather difficult, but the authors have succeeded in explaining it very well, and a reader can follow the equations easily. It is an advantage in reading this book to have some understanding of the physics of cavitation. Therefore, this book is not an introductory text, but a book for more advanced study. However, this does not mean that this book is too difficult for a beginner, because it explains the cavitation phenomenon using many figures. Therefore, even a beginner on cavitation can read and can understand what cavitation is. If the student studies through this book (with patience), he or she can become an expert on the physics of cavitation.
Download or read book Flinovia Flow Induced Noise and Vibration Issues and Aspects III written by Elena Ciappi and published by Springer Nature. This book was released on 2021-04-29 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances and innovations in the field of flow-induced vibration and noise, as presented by leading international researchers at the 3rd International Symposium on Flow Induced Noise and Vibration Issues and Aspects (FLINOVIA), which was held in Lyon, France, in September 2019. It explores topics such as turbulent boundary layer-induced vibration and noise, tonal noise, noise due to ingested turbulence, fluid-structure interaction problems, and noise control techniques. The authors’ backgrounds represent a mix of academia, government, and industry, and several papers include applications to important problems for underwater vehicles, aerospace structures and commercial transportation. The book offers a valuable reference guide for all those interested in measurement, modelling, simulation and reproduction of the flow excitation and flow induced structural response.
Download or read book Materials Design and Manufacturing for Sustainable Environment written by Elango Natarajan and published by Springer Nature. This book was released on 2022-09-28 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents select proceedings of the International Conference on Materials, Design and Manufacturing (ICMDMSE 2022). The book covers recent trends in design and manufacturing practices relating to sustainability. Various topics covered in this book include materials design for sustainability, material characterization, tribology, finite element methods (FEM), computational fluid dynamics in designing materials, manufacturing techniques inclined to sustainability, additive manufacturing, energy, Industry 4.0, MEMS, green manufacturing, and optimization techniques. This book will be useful for researchers and professionals working in various fields of mechanical engineering.
Download or read book Smart Flow Control Processes in Micro Scale Volume 2 written by Bengt Sunden and published by MDPI. This book was released on 2020-12-29 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, microfluidic devices with a large surface-to-volume ratio have witnessed rapid development, allowing them to be successfully utilized in many engineering applications. A smart control process has been proposed for many years, while many new innovations and enabling technologies have been developed for smart flow control, especially concerning “smart flow control” at the microscale. This Special Issue aims to highlight the current research trends related to this topic, presenting a collection of 33 papers from leading scholars in this field. Among these include studies and demonstrations of flow characteristics in pumps or valves as well as dynamic performance in roiling mill systems or jet systems to the optimal design of special components in smart control systems.
Download or read book HSMV 2020 written by E. Begovic and published by IOS Press. This book was released on 2020-11-03 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 12th International Symposium on High Speed Marine Vehicles, held virtually as an e-conference for the first time on 15 and 16 October 2020. High Speed Marine Vehicles Conference has almost 30-year history since the first Conference held in Naples in 1991. Since then, it has been an opportunity to present and discuss developments in the design, construction and operation of High Speed Marine Vessels. More than 40 abstracts were submitted for this edition of the conference, and following a rigorous review process, 26 papers were selected for inclusion in this book. These have been divided into 7 sections: CFD/EFD/sea trials; hydrofoils; multi-hull hydrodynamics; planing-hull hydrodynamics; propulsion and ship machinery; second generation intact stability criteria; and structures, loads, strength and materials. Topics covered include updated aspects of and developments in ship design, numerical and experimental hydrodynamics, seakeeping and maneuvering, and marine structures and machinery. This publication will be of interest to researchers from academia, industry, government agencies and certifying authorities, as well as designers and operators of high-speed vessels.
Download or read book Twenty Second Symposium on Naval Hydrodynamics written by National Research Council and published by National Academies Press. This book was released on 2000-03-02 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Twenty-Second Symposium on Naval Hydrodynamics was held in Washington, D.C., from August 9-14, 1998. It coincided with the 100th anniversary of the David Taylor Model Basin. This international symposium was organized jointly by the Office of Naval Research (Mechanics and Energy Conversion S&T Division), the National Research Council (Naval Studies Board), and the Naval Surface Warfare Center, Carderock Division (David Taylor Model Basin). This biennial symposium promotes the technical exchange of naval research developments of common interest to all the countries of the world. The forum encourages both formal and informal discussion of the presented papers, and the occasion provides an opportunity for direct communication between international peers.
Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book Hydraulic Research in the United States and Canada written by United States. National Bureau of Standards and published by . This book was released on 1978 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Research in the United States and Canada 1976 written by Pauline H. Gurewitz and published by . This book was released on 1978 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
