Download or read book Intumescent Coating and Fire Protection of Steel Structures written by Guo-Qiang Li and published by CRC Press. This book was released on 2023-04-20 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intumescent Coating and Fire Protection of Steel Structures establishes the thermo insulation characteristics of intumescent coating under various fire and hydrothermal aging circumstances and shows how to predict the temperature elevation of steel structures protected with intumescent coatings in fires for avoiding structural damage. Introduced are the features and applications of intumescent coatings for protecting steel structures against fire. The constant effective thermal conductivity is defined and employed to simplify the quantification for the thermo-resistance of intumescent coatings. An experimental investigation into the hydrothermal aging effects on insulative properties of intumescent coatings is presented, as well as the influence of topcoat on insulation and aging of intumescent coatings. Also described is a practical method for calculating the temperature of the protected steel structures with intumescent coatings in order to evaluate the fire safety of a structure. The book is aimed at fire and structural engineers, as well as researchers and students concerned with the protection of steel structures.
Download or read book Applications of Fire Engineering written by Martin Gillie and published by CRC Press. This book was released on 2017-09-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book holds the proceedings of the Conference on Applications of Structural Fire Engineering (ASFE 2017), held on September 7-8, 2017, in Manchester, UK. The ASFE’17 conference will be the next in a series (2009, 2011, 2013, 2015) of successful conferences that aim to bring together experts and specialists in design against fire from all over the world to share ideas and to acquire knowledge in the field of structural fire engineering. Practice in structural engineering increasingly accepts the benefits of performancebased approaches to the design of structures for fire resistance. This conference will focus on the application of design methods, both manual and computational, for structures to resist fire. Particularly relevant themes will be fire modelling, simulation of the heat transfer between fire and structures, and modelling of structural behaviour at elevated temperatures using numerical methods or software implementations of design codes.
Download or read book Composite Construction in Steel and Concrete 9 written by Markus Knobloch and published by John Wiley & Sons. This book was released on 2024-09-03 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Construction in Steel and Concrete IX The highly successful International Conference series on Composite Construction in Steel and Concrete is a major forum for researchers, practitioners, and engineers to share and discuss their research, practical experience and innovations related to composite constructions in steel and concrete. Composite Construction is a key consideration in the design of buildings and infrastructure. Significant advances in research and development have increased the knowledge of the structural performance of composite structures. Some areas are becoming well understood and implemented in the design practice, codes and standards worldwide, while others like, e.g., application of high-performance materials or dismountable and reusable composite members need further studies; trends that are reflected by the conference papers. The 62 contributions contained in this book cover a wide variety of topics, including composite beams, composite columns, composite decks, joints, shear connections, fire behavior, seismic behavior, fatigue and fracture, codification, composite bridges, innovative hybrid structures, numerical investigations and practical applications. The Papers are peer-reviewed by the Scientific Board and may be adapted based on the outcome of the discussions during the conference. This book therefore summarizes the state-of-the-art in composite construction worldwide, as presented at the 9th International Conference on Composite Construction in Steel and Concrete hosted by the Ruhr-Universität Bochum, University of Stuttgart, RPTU Kaiserslautern-Landau and University of Luxembourg, representing the work of authors from 18 countries.
Download or read book Design of Composite Beams with Large Web Openings written by R. M. Lawson and published by . This book was released on 2011 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures in Fire written by Venkatesh Kodur and published by DEStech Publications, Inc. This book was released on 2010 with total page 1047 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop, practical handbook containing all of the current commercial non-halogenated flame retardant technologies as well as experimental systems near commercialization In response to the emphasis on replacing halogenated flame retardants with alternate technologies, this handbook focuses on existing non-halogenated flame retardants and the experimental close-to-production systems that are available today. The Non-Halogenated Flame Retardant Handbook starts with an overview of the regulations and customer perceptions driving non-halogenated flame retardant selections over older halogenated technologies. It then moves on to cover the known major classes of non-halogenated flame retardants, before concluding with the current niche-performing technologies and untried commercial contenders of the future. The Non-Halogenated Flame Retardant Handbook: Takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy—placing more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and the various technologies’ strengths and limits Focuses on the proper use of non-halogenated flame retardants, rather than the mechanics of how they work Discusses important future trends in flame retardancy Features sections written by industrial and chemical experts who know how to apply the technology to polymers for fire safety needs
Download or read book High Temperature Performance of Polymer Composites written by Yu Bai and published by John Wiley & Sons. This book was released on 2014-03-31 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors explain the changes in the thermophysical and thermomechanical properties of polymer composites under elevated temperatures and fire conditions. Using microscale physical and chemical concepts they allow researchers to find reliable solutions to their engineering needs on the macroscale. In a unique combination of experimental results and quantitative models, a framework is developed to realistically predict the behavior of a variety of polymer composite materials over a wide range of thermal and mechanical loads. In addition, the authors treat extreme fire scenarios up to more than 1000?C for two hours, presenting heat-protection methods to improve the fire resistance of composite materials and full-scale structural members, and discuss their performance after fire exposure. Thanks to the microscopic approach, the developed models are valid for a variety of polymer composites and structural members, making this work applicable to a wide audience, including materials scientists, polymer chemists, engineering scientists in industry, civil engineers, mechanical engineers, and those working in the industry of civil infrastructure.
Download or read book Designing Steel Structures for Fire Safety written by Jean Marc Franssen and published by CRC Press. This book was released on 2009-05-06 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural design in fire conditions is conceptually similar to structural design in normal temperature conditions, but often more difficult because of internal forces induced by thermal expansion, strength reduction due to elevated temperatures, much larger deflections, and numerous other factors. Before making any design decisions it is esse
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Tubular Structures XI written by JeffreyA. Packer and published by Routledge. This book was released on 2017-10-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This topical book contains the latest scientific and engineering developments in the field of tubular steel structures, as presented at the "11th International Symposium and IIW International Conference on Tubular Structures". The International Symposium on Tubular Structures (ISTS) has a long-standing reputation for being the principal showcase for manufactured tubing and the prime international forum for discussion of research, developments and applications in this field. Various key and emerging subjects in the field of hollow structural sections are covered, such as: novel applications and case studies, static and fatigue behaviour of connections/joints, concrete-filled and composite tubular members, earthquake resistance, specification and code developments, material properties and structural reliability, impact resistance and brittle fracture, fire resistance, casting and fabrication innovations. Research and development issues presented in this book are applicable to buildings, bridges, offshore structures, entertainment rides, cranes, towers and various mechanical and agricultural equipment. This book is thus a pertinent reference source for architects, civil and mechanical engineers, designers, steel fabricators and contractors, manufacturers of hollow sections or related construction products, trade associations involved with tubing, owners or developers of tubular structures, steel specification committees, academics and research students. The conference presentations herein include two keynote lectures (the International Institute of Welding Houdremont Lecture and the ISTS Kurobane Lecture), plus finalists in the CIDECT Student Papers Competition. The 11th International Symposium and IIW International Conference on Tubular Structures – ISTS11 – took place in Québec City, Canada from August 31 to September 2, 2006.
Download or read book Guideline on Fire Ratings of Archaic Materials and Assemblies written by and published by . This book was released on 2000 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the Guideline on Fire Ratings of Archaic Materials and Assemblies is to assist architects, engineers, preservationists, and code officials in evaluating the fire safety of older buildings by providing documentation on the fire-related performance of a wide variety of archaic building materials and assemblies, and, for those cases where documentation cannot be found, by providing ways to evaluate general classes of archaic materials and assemblies.
Download or read book New Technologies in Protective Coatings written by Carlos Giudice and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are at the center of all technological advances; it is evident in considering the spectacular progress that has been made in fields as diverse as engineering, medicine, biology, etc. Materials science and technology must develop researches allowing the generation of new methods of protection to reduce fundamentally the losses of human life as well as the economic ones. The former are impossible of quantifying, while the latter are highly significant; thus, only those derived from corrosive processes in their different forms reach, in technologically developed countries, about 4% of the Gross National Product (GNP), while those derived from fire action range from 0.5 to 1.0% of the mentioned GNP. The book, in the different chapters, displays original systems of superficial protection and of low environmental impact to minimize the losses by corrosion and the fire action.
Download or read book Proceedings of the Institution of Civil Engineers written by and published by . This book was released on 2009 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Long Term Thermal Exposure on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2013-11-20 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide brings together a wide range of essential data on the effect of long term thermal exposure on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The data is supported by explanations of how to make use of the data in real-world engineering contexts. High heat environments are common in automotive, oil and gas, household appliances, coatings, space and aeronautics and many more end uses. As a result, thermal stability data are critically important to engineers designing parts particularly that replace metals, work that is common today as they look for ways to reduce weight. The data tables in this book enable engineers and scientists to select the right materials for a given product or application across a wide range of sectors. Several polymer classes are covered, including polyolefins, polyamides, polyesters, elastomers, fluoropolymers, biodegradable plastics and more, saving readers the need to contact suppliers. The book also includes introductory sections to provide background on plastic/polymer chemistry and formulation and plastic testing methods, providing the knowledge required to make best use of the data. Essential data and practical guidance for engineers and scientists working with plastics for use in high temperature environments Includes introductory chapters on polymer chemistry and its effect on thermal stability, providing the underpinning knowledge required to utilize the data Covers a wide range of commercial polymer classes, saving readers the need to contact suppliers
Download or read book SFPE Handbook of Fire Protection Engineering written by Philip J. DiNenno and published by National Fire Protection Association (NFPA). This book was released on 1988-01-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Properties of Polymer Composite Materials written by A. P. Mouritz and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first to deal with the important topic of the fire behaviour of fibre reinforced polymer composite materials. The book covers all of the key issues on the behaviour of composites in a fire. Also covered are fire protection materials for composites, fire properties of nanocomposites, fire safety regulations and standards, fire test methods, and health hazards from burning composites.
