Download or read book Proceedings of the 2022 International Petroleum and Petrochemical Technology Conference written by Jia'en Lin and published by Springer Nature. This book was released on 2023-05-10 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 6th International Petroleum and Petrochemical Technology Conference (IPPTC 2022). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.
Download or read book Processing of Heavy Crude Oils written by Ramasamy Marappa Gounder and published by . This book was released on 2019-12-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Convective Boiling and Condensation written by John G. Collier and published by Clarendon Press. This book was released on 1994-05-19 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -
Download or read book Multiphase Flow Dynamics written by Marcio Ferreira Martins and published by Springer Nature. This book was released on 2022-04-01 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents isothermal and non-isothermal multiphase flows with and without phase change or chemical reactions. Six main axes of multiphase flow are covered in a strategic order: Multiphase Flow in Industry, Multiphase Flow Measurement and Instrumentation, Multiphase Flow With Phase Change & Chemical Reactions, Multiphase Flow Modeling, Experimental Multiphase Flow, and Wet and Dry Particulate Systems. Each part is opened by mini-reviews written by internationally prominent researchers from the academy and industry. The content is of interest to researchers and engineers working in mining, oil and gas, power, nuclear, chemical process, space, food, biomedical, micro and nanotechnology, and other industries.
Download or read book Proceedings of the International Field Exploration and Development Conference 2021 written by Jia'en Lin and published by Springer Nature. This book was released on 2022-09-07 with total page 5829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on reservoir surveillance and management, reservoir evaluation and dynamic description, reservoir production stimulation and EOR, ultra-tight reservoir, unconventional oil and gas resources technology, oil and gas well production testing, and geomechanics. This book is a compilation of selected papers from the 11th International Field Exploration and Development Conference (IFEDC 2021). The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers, senior engineers as well as professional students.
Download or read book Fundamentals of Multiphase Flow written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2005-04-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Journal of Scientific and Industrial Research written by and published by . This book was released on 2015 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Advances in Petrophysics written by Jianchao Cai and published by MDPI. This book was released on 2019-04-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the influence of pore-throat size distribution, pore connectivity, and microscale fractures, the transport, distribution, and residual saturation of fluids in porous media are difficult to characterize. Petrophysical methods in natural porous media have attracted great attention in a variety of fields, especially in the oil and gas industry. A wide range of research studies have been conducted on the characterization of porous media covers and multiphase flow therein. Reliable approaches for characterizing microstructure and multiphase flow in porous media are crucial in many fields, including the characterization of residual water or oil in hydrocarbon reservoirs and the long-term storage of supercritical CO2 in geological formations. This book gathers together 15 recent works to emphasize fundamental innovations in the field and novel applications of petrophysics in unconventional reservoirs, including experimental studies, numerical modeling (fractal approach), and multiphase flow modeling/simulations. The relevant stakeholders of this book are authorities and service companies working in the petroleum, subsurface water resources, air and water pollution, environmental, and biomaterial sectors.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1973 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students.* Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics
Download or read book 9th International Conference on Multiphase 99 written by A. P. Burns and published by Professional Engineering Publishing. This book was released on 1999 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The oil and gas industry continues to increase its practical applications for multiphase technology as it matures and becomes more accepted. In particular, the economic benefits for developing marginal and deep water oil fields using multiphase techniques are now established. Current oil price levels and the need to develop these fields will drive the application of multiphase technology even further forward.
Download or read book Chemical Engineering Fluid Mechanics written by Ron Darby and published by CRC Press. This book was released on 2016-11-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the most current, accurate, and practical fluid mechanics related applications that the practicing BS level engineer needs today in the chemical and related industries, in addition to a fundamental understanding of these applications based upon sound fundamental basic scientific principles. The emphasis remains on problem solving, and the new edition includes many more examples.
Download or read book Tribology of Abrasive Machining Processes written by Ioan D. Marinescu and published by William Andrew. This book was released on 2012-12-07 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws upon the science of tribology to understand, predict and improve abrasive machining processes. Pulling together information on how abrasives work, the authors, who are renowned experts in abrasive technology, demonstrate how tribology can be applied as a tool to improve abrasive machining processes. Each of the main elements of the abrasive machining system are looked at, and the tribological factors that control the efficiency and quality of the processes are described. Since grinding is by far the most commonly employed abrasive machining process, it is dealt with in particular detail. Solutions are posed to many of the most commonly experienced industrial problems, such as poor accuracy, poor surface quality, rapid wheel wear, vibrations, work-piece burn and high process costs. This practical approach makes this book an essential tool for practicing engineers. Uses the science of tribology to improve understanding and of abrasive machining processes in order to increase performance, productivity and surface quality of final products A comprehensive reference on how abrasives work, covering kinematics, heat transfer, thermal stresses, molecular dynamics, fluids and the tribology of lubricants Authoritative and ground-breaking in its first edition, the 2nd edition includes 30% new and updated material, including new topics such as CMP (Chemical Mechanical Polishing) and precision machining for micro-and nano-scale applications
Download or read book Single and Two Phase Flow Pressure Drop and Heat Transfer in Tubes written by Afshin J. Ghajar and published by Springer Nature. This book was released on 2022-01-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides design engineers an elemental understanding of the variables that influence pressure drop and heat transfer in plain and micro-fin tubes to thermal systems using liquid single-phase flow in different industrial applications. It also provides design engineers using gas-liquid, two-phase flow in different industrial applications the necessary fundamentals of the two-phase flow variables. The author and his colleagues were the first to determine experimentally the very important relationship between inlet geometry and transition. On the basis of their results, they developed practical and easy to use correlations for the isothermal and non-isothermal friction factor (pressure drop) and heat transfer coefficient (Nusselt number) in the transition region as well as the laminar and turbulent flow regions for different inlet configurations and fin geometry. This work presented herein provides the thermal systems design engineer the necessary design tools. The author further presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommends some of the well scrutinized modeling techniques.
Download or read book Handbook of Natural Gas Transmission and Processing written by Saeid Mokhatab and published by Gulf Professional Publishing. This book was released on 2012-08-08 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, well-documented, and forward-thinking work, the second edition of Handbook of Natural Gas Transmission and Processing continues to present a thoroughly updated, authoritative, and comprehensive description of all major aspects of natural gas transmission and processing. It provides an ideal platform for engineers, technologists, and operations personnel working in the natural gas industry to get a better understanding of any special requirements for optimal design and operations of natural gas transmission pipelines and processing plants. - First book of its kind that covers all aspects of natural gas transmission and processing - Provides pivotal updates on the latest technologies, which have not been addressed in-depth in any existing books - Offers practical advice for design and operation based on sound engineering principles and established techniques - Examines ways to select the best processing route for optimal design of gas-processing plants - Contains new discussions on process modeling, control, and optimization in gas processing industry
Download or read book ICIPEG 2014 written by Mariyamni Awang and published by Springer. This book was released on 2015-03-20 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd International Conference on Integrated Petroleum Engineering and Geosciences 2014 (ICIPEG2014). Topics covered on the petroleum engineering side include reservoir modeling and simulation, enhanced oil recovery, unconventional oil and gas reservoirs, production and operation. Similarly geoscience presentations cover diverse areas in geology, geophysics palaeontology and geochemistry. The selected papers focus on current interests in petroleum engineering and geoscience. This book will be a bridge between engineers, geoscientists, academicians and industry.
