Download or read book Experimental Studies of Typical Sway Frames of Double Deck Steel Bridges and Their Seismic Retrofit written by Sung-Wook Cho and published by . This book was released on 1999 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclic Tests of Existing and Retrofitted Sway Frames of San Francisco Oakland Bay Bridge written by Abolhassan Astaneh-Asl and published by . This book was released on 1998 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1998 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1999 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proof testing of Latticed Members and Their Connections on SFOBB written by and published by . This book was released on 1998 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this project was to provide the California Department of Transportation (Caltrans) with the information necessary for finalizing seismic retrofit design of the San Francisco-Oakland Bay Bridge (SFOBB). Focus was on conducting cyclic tests of half-scale specimens representing latticed members and their connections of the SFOBB. The results of the tests and related analyses were used for refining and modifying the retrofit design of the bridge as well as providing physical results on the actual behavior of existing and retrofitted members. Results showed that the dominant failure mode of the latticed members was the local buckling of the angle legs between the latticed points. In addition, it was found that the failure of connection rivets was the main failure mode of the existing latticed members in specimens with gusset plate connections.
Download or read book Cyclic Behavior and Seismic Design Steel H piles written by Abolhassan Astaneh-Asl and published by . This book was released on 1998 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Technology in Structural Engineering written by Mohamed Elgaaly and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains the papers presented at the 2000 Structures Congress & Exposition held on May 8-10, 2000, in Philadelphia, Pennsylvania. The themes include: 14th Analysis & Computational Specialty Conference, Bridges, Buildings, Dynamics/Wind/Seismic, Steel structures, Timber/Composites/Concrete, Practical design & detailing. The goal of the Congress is to cover the advanced technology of structural engineering. Topics range from the latest research developments to practical applications of structural engineering principles.
Download or read book Designing for Earthquakes written by Federal Emergency Management Agency and published by www.Militarybookshop.CompanyUK. This book was released on 2006-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.
Download or read book Experimental Vibration Analysis for Civil Structures written by Joel P. Conte and published by Springer. This book was released on 2017-10-11 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents selected contributions from the International Conference on Experimental Vibration Analysis of Civil Engineering Structures held in San Diego, California in 2017 (EVACES2017). The event brought together engineers, scientists, researchers, and practitioners, providing a forum for discussing and disseminating the latest developments and achievements in all major aspects of dynamic testing for civil engineering structures, including instrumentation, sources of excitation, data analysis, system identification, monitoring and condition assessment, in-situ and laboratory experiments, codes and standards, and vibration mitigation.
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Strengthening and Retrofitting of Existing Structures written by Aníbal Costa and published by Springer. This book was released on 2017-10-13 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of strengthening and retrofitting approaches, solutions and technologies for existing structures. It addresses in detail specific techniques for the strengthening of traditional constructions, reinforced concrete buildings, bridges and their foundations. Finally, it discusses issues related to standards and economic decision support tools for retrofitting.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book New Concrete Materials written by R. N. Swamy and published by . This book was released on 1983 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
