Download or read book Experimental Performance and Analysis of 15 04 centimeter tip diameter Radial inflow Turbine with Work Factor of 1 126 and Thick Blading written by Kerry L. McLallin and published by . This book was released on 1980 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aerodynamic design, the experimental performance, and an internal loss breakdown are presented for a 15.04-cm-tip-diameter, radial-inflow turbine. The design application is to drive a two-stage, 10-to-1 pressure ratio compressor with a mass flow of 0.952 kg/sec and a rotative speed of 70,000 rpm. The turbine inlet temperature was 1478 K, and the turbine was designed with blades thick enough for internal cooling passages. The rotor tip diameter was limited to 86 percent of optimum in order to obtain a reduced-tip-speed design. The turbine was fabricated with solid, uncooled blading and tested in air at nominal inlet pressure and temperature of 1.379 x 100,000 N/sq. m and 322.2 K, respectively. Experimental results indicated the turbine total efficiency to be 5.3 points less than design. Analysis of these results has indicated the deficit in performance to be due to stator secondary flow losses, vaneless-space surface friction losses, and trailing-edge wake mixing losses. (Author).
Download or read book Experimental Performance and Analysis of 15 04 centimeter tip diameter Radial inflow Turbine with Work Factor of 1 126 and Thick Blading written by Kerry L. McLallin and published by . This book was released on 1980 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1980 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Scientific and Technical Publications written by and published by . This book was released on 1987 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Determination of Radial Inflow Turbine Design Geometry for Maximum Efficiency written by Harold E. Rohlik and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Performance Evaluation of a Radial inflow Turbine Over a Range of Specific Speeds written by Milton G. Kofskey and published by . This book was released on 1966 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Performance Evaluation of a 6 02 inch Radial inflow Turbine Over a Range of Reynolds Number written by Donald E. Holeski and published by . This book was released on 1967 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Performance Evaluation of a 4 59 inch Radial inflow Turbine Over a Range of Reynolds Number written by William J. Nusbaum and published by . This book was released on 1967 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Specific Speed on Experimental Performance of a Radial inflow Turbine written by Milton G. Kofskey and published by . This book was released on 1972 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The performance of a 12.62-cm (4.97-in. ) tip diameter radial-inflow turbine was investigated over a range of specific speeds from 0.28 to 0.73 (39 to 94) at equivalent design speed and pressure ratio. The specific speed range was obtained by using stators with different throat areas. The stators were used with the design rotor, with a rotor exducer extension that reduced the rotor throat area, and with the rotor exducer cut back to increase the rotor throat area. The efficiencies obtained with the three rotor configurations are presented and compared.
Download or read book NASA SP written by and published by . This book was released on 1962 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Scientific and Technical Publications written by and published by . This book was released on 1987 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Performance Evaluation of a 6 02 Inch 15 29 Cm Radial inflow Turbine with an Exit Diffuser written by Samuel M. Futral and published by . This book was released on 1967 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Importing Into the United States written by U. S. Customs and Border Protection and published by . This book was released on 2015-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains process of importing goods into the U.S., including informed compliance, invoices, duty assessments, classification and value, marking requirements, etc.
Download or read book Gas Turbine Theory written by G.F.C. Rogers and published by Pearson Higher Ed. This book was released on 2017-06-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by The Fairmont Press, Inc.. This book was released on 2003 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a bestseller, this comprehensive reference provides the fundamental information required to understand both the operation and proper application of all types of gas turbines. The completely updated second edition adds a new section on use of inlet cooling for power augmentation and NOx control. It explores the full spectrum of gas turbines hardware, typical application scenarios, and operating parameters, controls, inlet treatments, inspection, trouble-shooting, and more. The author discusses strategies that can help readers avoid problems before they occur and provides tips that enable diagnosis of problems in their early stages and analysis of failures to prevent their recurrence.
Download or read book Aeronautical Engineer s Data Book written by Cliff Matthews and published by Elsevier. This book was released on 2001-10-17 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeronautical Engineer's Data Bookis an essential handy guide containing useful up to date information regularly needed by the student or practising engineer. Covering all aspects of aircraft, both fixed wing and rotary craft, this pocket book provides quick access to useful aeronautical engineering data and sources of information for further in-depth information. Quick reference to essential data Most up to date information available
Download or read book Fluid Mechanics written by Walther Kaufmann and published by . This book was released on 1954 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
