Download or read book Experimental Investigations of Properties of Magnetoactive Polymers written by Jayadurga Iyer Ganapathi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic responses of the MR Elastomers and MR gel have been studied care- fully by various research groups. However, to understand completely the dynamic response of the material, it is important to have a clear understanding of quasi-static response of the material. Thus, for the current work, we have studied quasi-static response of the MR gel. For current setup, 27 samples were prepared using Septon, plasticizer and magnetic particles and were tested for 3 rounds over 3 different magnetic fields under plane strain compression. The results from plane strain compression show linear increase in the load taken with the increase in concentration of magnetic particles in absence of any magnetic field. The response characteristics under uniform magnetic field showed a huge leap in the load taken for particular deflection. To study the quasistatic respose, the material is assumed to behave like an isotropic hyperelastic response. Field dependent Neo-Hookean and field dependent Valanis Landel models have been fit to the data, and it was found that simple 1-term field dependent Valanis Landel model with power law coefficient as four agrees well with the shear modulus obtained from experiments. The shear modulus of MAP from the Valanis Landel and Neo Hookean model was assumed to be linearly dependent on the concentration of magnetic particles and magnetic field, and this matched the experimental data well.
Download or read book Experimental Investigations of Magnetic and Magneto rheological Materials and Their Rigidification Properties written by Radek Glaser and published by . This book was released on 2009 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magneto Active Polymers written by Jean-Paul Pelteret and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-12-16 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: From fabrication to testing and modeling this monograph covers all aspects on the materials class of magneto active polymers. The focus is on computational modeling of manufacturing processes and material parameters. As other smart materials, these elastomers have the ability to change electrical and mechanical properties upon application of magnetic fields. This allows for novel applications ranging from biomedical engineering to mechatronics.
Download or read book Magneto Active Polymers written by Jean-Paul Pelteret and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-12-16 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: From fabrication to testing and modeling this monograph covers all aspects on the materials class of magneto active polymers. The focus is on computational modeling of manufacturing processes and material parameters. As other smart materials, these elastomers have the ability to change electrical and mechanical properties upon application of magnetic fields. This allows for novel applications ranging from biomedical engineering to mechatronics.
Download or read book Magnetic Hybrid Materials written by Stefan Odenbach and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-10-25 with total page 1172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Externally tunable properties allow for new applications of magnetic hybrid materials containing magnetic micro- and nanoparticles in sensors and actuators in technical and medical applications. By means of easy to generate and control magnetic fields, changes of the internal particle arrangements and the macroscopic properties can be achieved. This monograph delivers the latest insights into multi-scale modelling, experimental characterization, manufacturing and application of those magnetic hybrid materials.
Download or read book Novel Magnetic Nanostructures written by Natalia Domracheva and published by Elsevier. This book was released on 2018-06-14 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Magnetic Nanostructures: Unique Properties and Applications reviews the synthesis, design, characterization and unique properties of emerging nanostructured magnetic materials. It discusses the most promising and relevant applications, including data storage, spintronics and biomedical applications. Properties investigated include electronic, self-assembling, multifunctional, and magnetic properties, along with magnetic phenomena. Structures range from magnetic nanoclusters, nanoparticles, and nanowires, to multilayers and self-assembling nanosystems. This book provides a better understanding of the static and dynamic magnetism in new nanostructures for important applications. Provides an overview of the latest research on novel magnetic nanostructures, including molecular nanomagnets, metallacrown magnetic nanostructures, magnetic dendrimers, self-assembling magnetic structures, multifunctional nanostructures, and much more Reviews the synthesis, design, characterization and detection of useful properties in new magnetic nanostructures Highlights the most relevant applications, including spintronic, data storage and biomedical applications
Download or read book Bioinspired Structures and Design written by Wole Soboyejo and published by Cambridge University Press. This book was released on 2020-09-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master simple to advanced biomaterials and structures with this essential text. Featuring topics ranging from bionanoengineered materials to bio-inspired structures for spacecraft and bio-inspired robots, and covering issues such as motility, sensing, control and morphology, this highly illustrated text walks the reader through key scientific and practical engineering principles, discussing properties, applications and design. Presenting case studies for the design of materials and structures at the nano, micro, meso and macro-scales, and written by some of the leading experts on the subject, this is the ideal introduction to this emerging field for students in engineering and science as well as researchers.
Download or read book Ferrofluids written by Stefan Odenbach and published by Springer. This book was released on 2008-01-11 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic control of the properties and the flow of liquids is a challenging field for basic research and for applications. This book is meant to be both an introduction to, and a state-of-the-art review of, this topic. Written in the form of a set of lectures and tutorial reviews, the book addresses the synthesis and characterization of magnetic fluids, their hydrodynamical description and their rheological properties. The book closes with an account of magnetic drug targeting.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Robotics written by Gareth J. Monkman and published by Bentham Science Publishers. This book was released on 2022-04-08 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft robotics is a subfield of robotics that encompasses the design and fabrication of robots with soft and compliant materials. Soft robots represent components like human prosthetics or biomimicking systems. Soft robotics relies on technically astute designs based on the correct choice of materials to enable a level of dexterity not possible with rigid components alone. The basic prime movers (actuators) and perception (sensors) require control systems capable of accommodating imprecise feedback data and often unpredictable reaction times. Mobility in such robots is more akin to entomological or marine systems than conventional guided vehicles. This reference is a guide to materials and systems used in soft robotics. If features 6 chapters contributed by robotics experts that review fundamental and applied topics that are important for understanding the requirements of soft robotics design projects and the physics of the polymers involved. Chapters are organized for easy reading and include references. The topics include: - Aspects of materials processing and engineering for the development of soft robotic devices - A review on biological gripping principles and their application to robotics - Information about self-sensing electroadhesive polymer grippers with magnetically controllable surface geometry - Theoretical and experimental investigations of magnetic hybrid materials - Modeling and dynamic analysis of a novel rotary soft robotic arm by transfer matrix method - Design and control of a portable continuum robot for pipe inspection assisted by a rigid manipulator This book is a suitable reference for scholars and engineers who are seeking knowledge about materials and design principles in soft robotics with its practical applications.
Download or read book Advances in Biomechanics and Tissue Regeneration written by Mohamed Hamdy Doweidar and published by Academic Press. This book was released on 2019-08-13 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Biomechanics and Tissue Regeneration covers a wide range of recent development and advances in the fields of biomechanics and tissue regeneration. It includes computational simulation, soft tissues, microfluidics, the cardiovascular system, experimental methods in biomechanics, mechanobiology and tissue regeneration. The state-of-the-art, theories and application are presented, making this book ideal for anyone who is deciding which direction to take their future research in this field. In addition, it is ideal for everyone who is exploring new fields or currently working on an interdisciplinary project in tissue biomechanics. Combines new trends in biomechanical modelling and tissue regeneration Offers a broad scope, covering the entire field of tissue biomechanics Contains perspectives from engineering, medicine and biology, thus giving a holistic view of the field
Download or read book Advanced Elastomers written by Anna Boczkowska and published by BoD – Books on Demand. This book was released on 2012-09-12 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an extensive overview of current trends in the area of elastomers and their composites from the chapters contributed by internationally recognized specialists. The book deals with novel synthesis, modelling and experimental methods in elastomers. Contents include: new approach to crosslinking, liquid crystal elastomers, nanocomposites, smart elastomers, elastomers in microelectronics and microfluidics, elastomers in cement concrete and mortar, experimental testing and modelling. Each section demonstrates how enhancements in materials, processes and characterization techniques can improve performance in the field of engineering. The book provides a unique opportunity to discover the latest research on elastomer advances from laboratories around the world. This book addresses to industrial and academic researchers in the fields of physical, chemical, biological sciences and engineering.
Download or read book New Achievements in Continuum Mechanics and Thermodynamics written by Bilen Emek Abali and published by Springer. This book was released on 2019-03-13 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a liber amicorum dedicated to Wolfgang H. Müller, and highlights recent advances in Prof. Müller’s major fields of research: continuum mechanics, generalized mechanics, thermodynamics, mechanochemistry, and geomechanics. Over 50 of Prof. Müller’s friends and colleagues contributed to this book, which commemorates his 60th birthday and was published in recognition of his outstanding contributions.
Download or read book The Kolsky Hopkinson Bar Machine written by Ramzi Othman and published by Springer. This book was released on 2018-04-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, leading scientists share their vision on the Kolsky-Hopkinson bar technique, which is a well-established experimental technique widely used to characterize materials and structures under dynamic, impact and explosion loads. Indeed, the Kolsky-Hopkinson bar machine is not a simple experimental device. It is rather a philosophical approach to solve the problem of measuring impact events. The split Hopkinson pressure bar conventional device is mainly limited to test homogeneous ductile non-soft materials under uni-axial compression. Extending the use of this device to more versatile applications faces several challenges such as controlling the stress state within the specimen and mastering the measurement of forces and velocities at the specimen-bar interfaces and then the material properties. Thus, the topics discussed in this book mainly focused on the loading and processing parts.
Download or read book High Performance and Speciality Elastomers 2005 written by and published by iSmithers Rapra Publishing. This book was released on 2005 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an exciting mix in these proceedings from both material suppliers and end users, who have discussed test and formulation data. There is an overview paper on the markets for rubbers from the International Rubber Study Group. There is also a new presentation on studies of food contact applications of high performance elastomers, with migration data available.
Download or read book Polymer Nanodiamond Nanocomposites written by Ayesha Kausar and published by Elsevier. This book was released on 2024-07-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer/Nanodiamond Nanocomposites: Fundamentals, Properties and Applications provides an up-to-date review of these materials. The structure, design, processing, and properties, as well as technological advancements, are all thoroughly discussed. Several practical and potential application areas are also identified such as tribological aerospace/automobile materials (thermally conducting, lubricant, and radiation shielding), coatings/anti-corrosion nanomaterials, shape memory nanocomposites, energy devices (Li ion batteries and solar cells), and biomedical nanomaterials (drug delivery, tissue engineering, biosensor, imaging). Current difficulties and potential opportunities are also discussed in detail. Polymer/Nanodiamond Nanocomposites: Fundamentals, Properties and Applications covers all aspects of these new novel materials' design, structure, manufacture, and applications. The book offers an up-to-date comprehensive knowledge resource for materials scientists, researchers, and engineers. Covers the latest advances in polymer/nanodiamond nanocomposites Includes important fundamentals, properties, and applications Examines nanodiamond nanobifiller derived polymeric nanocomposites Discusses a wide range of technical applications in aerospace, automobiles, coatings, corrosion resistance, shape memory, energy devices, and biomedical fields
Download or read book Magnetorheology written by Norman Wereley and published by Royal Society of Chemistry. This book was released on 2014 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading experts provide a timely overview of the key developments in the physics, chemistry and uses of magnetorheological fluids.
