Download or read book Experimental Investigation of Crack Initiation in Face Centered Cubic Materials in the High and Very High Cycle Fatigue Regime written by Straub, Thomas and published by KIT Scientific Publishing. This book was released on 2016-06-15 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Investigation of Crack Initiation in Face Centered Cubic Materials in the High and Very High Cycle Fatigue Regime written by Thomas Straub and published by . This book was released on 2020-10-09 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates the fatigue mechanisms and crack initiation of Ni, Al and Cu on a small-scale in the Very High Cycle Fatigue regime by means of innovative fatigue experimentation. A novel custom-built resonant fatigue setup showed that the sample resonant frequency changes with increasing cycle number due to fatigue damage. Mechanisms such as slip band formation have been observed. Cyclic hardening, vacancy and oxidation formation may be considered as early fatigue mechanisms. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Download or read book Fatigue of Materials at Very High Numbers of Loading Cycles written by Hans-Jürgen Christ and published by Springer. This book was released on 2018-11-19 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.

Download or read book A novel micro mechanical model for prediction of multiaxial high cycle fatigue at small scales written by Eslami, Reza and published by KIT Scientific Publishing. This book was released on 2017-05-03 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiscale Modeling of Curing and Crack Propagation in Fiber Reinforced Thermosets written by Schöller, Lukas and published by KIT Scientific Publishing. This book was released on 2024-03-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the production of fiber-reinforced thermosets, the resin material undergoes a reaction that can lead to damage. A two-stage polymerization reaction is modeled using molecular dynamics and evaluations of the system including a fiber surface are performed. In addition, a phase-field model for crack propagation in heterogeneous systems is derived. This model is able to predict crack growth where established models fail. Finally, the model is used to predict crack formation during curing.

Download or read book Dynamic Model based Analysis of Oxygen Reduction Reaction in Gas Diffusion Electrodes written by Röhe, Maximilian and published by KIT Scientific Publishing. This book was released on 2024-01-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, the first simulation model of oxygen depolarized cathodes (ODC), which are silver catalyst-based gas diffusion electrodes, is presented that considers the phase equilibrium of the gas-liquid interface and structure-related inhomogeneities in electrolyte distribution. By means of the model it has been identified that mass transport of water and ions in the liquid phase is a crucial factor for electrode performance and how it is influenced by the electrode structure.

Download or read book Phase field simulations of multi component solidification and coarsening based on thermodynamic datasets written by Schulz, Sebastian and published by KIT Scientific Publishing. This book was released on 2017-02-22 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phase field modeling of microstructural pattern formation in alloys and geological veins written by Ankit, Kumar and published by KIT Scientific Publishing. This book was released on 2016-05-31 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Consequences of hydroxyl generation by the silica water reaction Part I Diffusion and Swelling written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effectson diffusion behaviour and mechanical properties. Water added to silica glass increases its specific volume so that the silica expands near the surface. Mechanical boundary conditions give rise for compressive “swelling stresses”. This fact provides a tool for the interpretation of many experimental observations from literature.

Download or read book Modeling transport properties and electrochemical performance of hierarchically structured lithium ion battery cathodes using resistor networks and mathematical half cell models written by Birkholz, Oleg and published by KIT Scientific Publishing. This book was released on 2022-10-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchically structured active materials in electrodes of lithium-ion cells are promising candidates for increasing gravimetric energy density and improving rate capability of the system. To investigate the influence of cathode structures on the performance of the whole cell, efficient tools for calculating effective transport properties of granular systems are developed and their influence on the electrochemical performance is investigated in specially adapted cell models.

Download or read book Consequences of hydroxyl generation by the silica water reaction Part II Global and local Swelling Part III Damage and Young s Modulus written by Fett, Theo and published by KIT Scientific Publishing. This book was released on 2022-07-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water diffusing into silica surfaces gives rise for several effects on diffusion behaviour and mechanical properties. In a preceding booklet, we focused on diffusion and fiber strengths and deformations which were obtained by water soaking under external loading. In the present booklet we deal with results and interpretations of strength increase in the absence of applied stresses.

Download or read book Development of NbN based Kinetic Inductance Detectors on sapphire and diamond substrates for fusion plasma polarimetric diagnostics written by Mazzocchi, Francesco and published by KIT Scientific Publishing. This book was released on 2022-07-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work aimed at designing, studying and producing the first prototypes of KIDs tailored for fusion plasma polarimetric diagnostics. Diamond was considered for the first time as substrate material for low-temperature superconducting detectors given its unmatched optical, radiation hardness and thermal qualities, properties necessary for working environments potentially saturated with radiation. This work represents a first step toward the optimization and final application of this technology.

Download or read book Microplasticity of idealized single crystalline Ag cantilevers characterized with methods of high resolution written by Wobrock, Mark and published by KIT Scientific Publishing. This book was released on 2017-11-22 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromechanical study on the deformation behaviour of directionally solidified NiAl Cr eutectic composites written by Kumar, Amritesh and published by KIT Scientific Publishing. This book was released on 2017-11-06 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On the Electro Chemo Mechanical Coupling in Solid State Batteries and its Impact on Morphological Interface Stability written by Ganser, Markus and published by KIT Scientific Publishing. This book was released on 2021-03-09 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state batteries with a lithium metal electrode are considered the next generation of high energy battery technology. Unfortunately, lithium metal is prone to harmful protrusion or dendrite growth which causes dangerous cell failure. Within this work the problem of protrusion growth is tackled by deriving a novel electro-chemo-mechanical theory tailored for binary solid state batteries which is then used to discuss the impact of mechanics on interface stability by numerical studies.

Download or read book Phase field Modeling of Phase Changes and Mechanical Stresses in Electrode Particles of Secondary Batteries written by Zhang, Tao and published by KIT Scientific Publishing. This book was released on 2021-09-27 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most storage materials exhibit phase changes, which cause stresses and, thus, lead to damage of the electrode particles. In this work, a phase-field model for the cathode material NaxFePO4 of Na-ion batteries is studied to understand phase changes and stress evolution. Furthermore, we study the particle size and SOC dependent miscibility gap of the nanoscale insertion materials. Finally, we introduce the nonlocal species concentration theory, and show how the nonlocality influences the results.

Download or read book Structure evolution in tribological interfaces studied by multilayer model alloys written by Cihan, Ebru and published by KIT Scientific Publishing. This book was released on 2020-10-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies of deformation mechanisms of metals and alloys pioneer the better investigation of the friction and wear behavior of materials with well-defined initial microstructures. Within this scope, in this work, the effect of sub-surface deformations on the resulting friction and wear behavior has been searched by means of a systematic experimental study on Au-Ni metallic multilayer model alloy system.