Download or read book Experimental Investigation of a semi industrial Carbonate Looping Process for scale up written by Jochen Bernd Ludwig Hilz and published by Cuvillier Verlag. This book was released on 2019-07-08 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: An efficient post-combustion capture technology is the carbonate looping (CaL) process reducing the amount of CO2 released by fossil fuelled power and industrial plants (CCS/U). Limestone based sorbents are circulated between two interconnected circulating fluidized bed (CFB) reactors. In a first reactor, the carbonator, the main part of CO2 contained in the flue gas of an upstream emission source is absorbed by CaO. The CO2 is released and the sorbent regenerated under oxy-firing conditions in a second reactor, the calciner. The present work discusses the results obtained from experimental investigation of the Carbonate Looping process in semi-industrial 1 MWth scale. Long-term pilot tests were conducted to improve the process and gain reliable experimental data to scale up the CaL process to industrial size. The type of fuel, sorbent, flue gas composition, reactor design, and operating conditions were varied to assess the operability and the long-term effects on the process performance. During periods of up to 60 h, parameters were not changed to achieve steady-state conditions. The stability of the CaL process in semi-industrial size was proven by steady-state CO2 absorption for more than 1,500 h with interconnected circulating fluidized bed reactors with absorption rates in the carbonator higher than 90% and overall capture rates higher than 95 %. The experimental data obtained in this work provide the basis to take the CaL process to the next stage of development, a demonstration pilot with a thermal size of 20 MWth. A conceptual plant setup for this demonstration unit was derived from the operational experience in the 1 MWth pilot plant. Based on evaluation of pilot testing and with the help of a validated process model, the design parameters were defined and verified. The heat and mass balancing for various operating cases was carried out to define the boundary conditions for the engineering of the demonstration pilot. Furthermore, the assessment of the demonstration pilot showed the expected performance.
Download or read book Proceedings of the 3rd International Conference on Separation Technology written by Muhammad Abbas Ahmad Zaini and published by Springer Nature. This book was released on 2021-05-24 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented in the 3rd International Conference on Separation Technology 2020 (ICoST 2020) held from 15 to 16th August 2020 at Johor, Malaysia. This proceeding contains papers presented by academics and industrial practitioners showcasing the latest advancements and findings in field of separation technology. The papers are categorized under the following tracks and topics of research: Environment Engineering Biotechnology Absorption and Adsorption Technology Wastewater Treatment ICoST 2020 covers multidisciplinary perspectives on separation research and aims to promote scientific information interchange between academics, researchers, graduates and industry professionals worldwide. This conference provides opportunities for the delegates to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration.
Download or read book Scale up in Chemical Engineering written by Marko Zlokarnik and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the important task of the scale-up of processes from the laboratory to the production scale, this easily comprehensible and transparent book is divided into two sections. The first part details the theoretical principles, introducing the subject for readers without a profound prior knowledge of mathematics. It discusses the fundamentals of dimensional analysis, the treatment of temperature-dependent and rheological material values and scale-up where model systems or not available or only partly similar. All this is illustrated by 20 real-world examples, while 25 exercises plus solutions new to this edition practice and monitor learning. The second part presents the individual basic operations and covers the fields of mechanical, thermal, and chemical process engineering with respect to dimensional analysis and scale-up. The rules for scale-up are given and discussed for each operation. Other additions to this second edition are dimensional analysis of pelleting processes, and a historical overview of dimensional analysis and modeling, while all the chapters have been updated to take the latest literature into account. Written by a specialist with more than 40 years of experience in the industry, this book is specifically aimed at students as well as practicing engineers, chemists and process engineers already working in the field.
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1972-10 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxy Fuel Combustion for Power Generation and Carbon Dioxide CO2 Capture written by L Zheng and published by Elsevier. This book was released on 2011-02-26 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxy-fuel combustion is currently considered to be one of the major technologies for carbon dioxide (CO2) capture in power plants. The advantages of using oxygen (O2) instead of air for combustion include a CO2-enriched flue gas that is ready for sequestration following purification and low NOx emissions. This simple and elegant technology has attracted considerable attention since the late 1990s, rapidly developing from pilot-scale testing to industrial demonstration. Challenges remain, as O2 supply and CO2 capture create significant energy penalties that must be reduced through overall system optimisation and the development of new processes.Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers. Following a foreword by Professor János M. Beér, the book opens with an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment. Part one introduces oxy-fuel combustion further, with a chapter comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture, followed by chapters on plant operation, industrial scale demonstrations, and circulating fluidized bed combustion. Part two critically reviews oxy-fuel combustion fundamentals, such as ignition and flame stability, burner design, emissions and heat transfer characteristics, concluding with chapters on O2 production and CO2 compression and purification technologies. Finally, part three explores advanced concepts and developments, such as near-zero flue gas recycle and high-pressure systems, as well as chemical looping combustion and utilisation of gaseous fuel.With its distinguished editor and internationally renowned contributors, Oxy-fuel combustion for power generation and carbon dioxide (CO2) capture provides a rich resource for power plant designers, operators, and engineers, as well as academics and researchers in the field. - Comprehensively reviews the fundamental principles and development of oxy-fuel combustion in fossil-fuel fired utility boilers - Provides an overview of oxy-fuel combustion technology and its role in a carbon-constrained environment - Introduces oxy-fuel combustion comparing the economics of oxy-fuel vs. post-/pre-combustion CO2 capture
Download or read book Government reports annual index written by and published by . This book was released on 199? with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book British Chemical Engineering Process Technology written by and published by . This book was released on 1964 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Continuous Crystallization written by Nima Yazdanpanah and published by Royal Society of Chemistry. This book was released on 2020-02-04 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous crystallization is an area of intense research, with particular respect to the pharmaceutical industry and fine chemicals. Improvements in continuous crystallization technologies offer chemical industries significant financial gains, through reduced expenditure and operational costs, and consistent product quality. Written by well-known leaders in the field, The Handbook of Continuous Crystallization presents fundamental and applied knowledge, with attention paid to application and scaling up, and the burgeoning area of process intensification. Beginning with concepts around crystallization techniques and control strategies, the reader will learn about experimental methods and computational tools. Case studies spanning fine and bulk chemicals, the pharmaceutical industry, and employing new mathematical tools, put theory into context.
Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1989 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Best Practices for Ocean Acidification Research and Data Reporting written by and published by . This book was released on 2011 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.
Download or read book British Chemical Engineering written by and published by . This book was released on 1964 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. - Explores key CO2 separation and compare technologies in terms of provable advantages and limitations - Analyzes all critical CO2 capture methods in tandem with related technologies - Introduces a panorama of various applications of CO2 capture
Download or read book Fluidization Engineering written by D. Kunii and published by Elsevier. This book was released on 2013-10-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidization Engineering, Second Edition, expands on its original scope to encompass these new areas and introduces reactor models specifically for these contacting regimes. Completely revised and updated, it is essentially a new book. Its aim is to distill from the thousands of studies those particular developments that are pertinent for the engineer concerned with predictive methods, for the designer, and for the user and potential user of fluidized beds. - Covers the recent advances in the field of fluidization. - Presents the studies of developments necessary to the engineers, designers, and users of fluidized beds.
Download or read book Electrical World written by and published by . This book was released on 1904 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Electrical World and Engineer written by and published by . This book was released on 1904 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
