Download or read book Experimental Evaluation and Modeling of Concrete Masonry Unit Walls written by Brittany Anne Bell and published by . This book was released on 2011 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many military and government buildings in the US and abroad use frame structures with infill wall systems. Conventionally constructed infill wall systems do not exhibit the blast resistance necessary. To develop blast design guidelines for Concrete Masonry Unit (CMU) wall systems, it is necessary to develop analytical models for the static resistance function of these walls that are verified using the results of full-scale physical experiments. The existing analytical models currently used for blast design of CMU walls underestimate the static resistance of the walls. Improvements in the prediction models for the resistance functions are necessary and could lead to improvements in the dynamic prediction tools. Ultimately this may result in improved accuracy and cost reduction of the blast design. The objective of this thesis is to develop an analytical model to predict the static resistance function for typical CMU wall systems and verify analytical resistance with data from full-scale physical experiments. Six full-scale CMU walls were tested using a vacuum chamber and their pressure-deflection response was recorded until failure. The walls were fully- or partially- grouted and constructed with various materials. An analytical model was developed to predict the static resistance function of the CMU walls. Depending on wall type and desired blast response the analytical model predictions were within 5-30% of experimental wall behavior.

Download or read book Experimental Evaluation of Phase Change Material Building Walls Using Small Passive Test Boxes written by and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Macroencapsulated PCM cemented within masonry building blocks can markedly increase the effectiveness of an equivalent volume of concrete for use as a mass wall for passive solar applications. Various hydrocarbons and hydrated salts were tested. The test procedure and results are presented and discussed. Of the PCM's tested, the most promising candidate material is calcium chloride hexahydrate. The best performing PCM blocks performed on a par with a massive masonry design. (WHK).

Download or read book Experimental Evaluation of Composite Masonry Walls Subjected to Axial and Shear Loads written by Mohan G. S. Rao and published by . This book was released on 1989 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Brick and Block Masonry written by Claudio Modena and published by CRC Press. This book was released on 2016-11-03 with total page 4087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - Trends, Innovations and Challenges contains the lectures and regular papers presented at the 16th International Brick and Block Masonry Conference (Padova, Italy, 26-30 June 2016). The contributions cover major topics: - Analysis of masonry structures - Bond of composites to masonry - Building physics and durability - Case studies - Codes and standards - Conservation of historic buildings - Earthen constructions - Eco-materials and sustainability - Fire resistance, blasts, and impacts - Masonry bridges, arches and vaults - Masonry infill walls and RC frames - Masonry materials and testing - Masonry repair and strengthening - New construction techniques and technologies - Reinforced and confined masonry - Seismic performance and vulnerability assessment In an ever-changing world, in which innovations are rapidly implemented but soon surpassed, the challenge for masonry, the oldest and most traditional building material, is that it can address the increasingly pressing requirements of quality of living, safety, and sustainability. This abstracts volume and full paper USB device, focusing on challenges, innovations, trends and ideas related to masonry, in both research and building practice, will proof to be a valuable source of information for researchers and practitioners, masonry industries and building management authorities, construction professionals and educators.

Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.

Download or read book Structural Modeling and Experimental Techniques Second Edition written by Harry G. Harris and published by CRC Press. This book was released on 1999-03-30 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Modeling and Experimental Techniques presents a current treatment of structural modeling for applications in design, research, education, and product development. Providing numerous case studies throughout, the book emphasizes modeling the behavior of reinforced and prestressed concrete and masonry structures. Structural Modeling and Experimental Techniques: Concentrates on the modeling of the true inelastic behavior of structures Provides case histories detailing applications of the modeling techniques to real structures Discusses the historical background of model analysis and similitude principles governing the design, testing, and interpretation of models Evaluates the limitations and benefits of elastic models Analyzes materials for reinforced concrete masonry and steel models Assesses the critical nature of scale effects of model testing Describes selected laboratory techniques and loading methods Contains material on errors as well as the accuracy and reliability of physical modeling Examines dynamic similitude and modeling techniques for studying dynamic loading of structures Covers actual applications of structural modeling This book serves students in model analysis and experimental methods, professionals manufacturing and testing structural models, as well as professionals testing large or full-scale structures - since the instrumentation techniques and overall approaches for testing large structures are very similar to those used in small-scale modeling work.

Download or read book Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings written by and published by . This book was released on 1999 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Behavior of Unbounded Post tensioned Masonry Walls written by Reza Hassanli and published by Springer. This book was released on 2018-08-07 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on a comprehensive analytical, experimental and numerical study on the flexural response of post-tensioned masonry walls under in-plane loads. It explores an important mechanism in this new generation of structural walls, called “Self-centering”. This mechanism can reduce residual drifts and structural damage during earthquake ground motion, and is particularly favorable for structures which are designed for immediate occupancy performance levels. The book reports on the development and verification of a finite element model of post-tensioned masonry walls. It describes a detailed parametric study to predict the strength of post-tensioned masonry walls. New design methodologies and expressions are developed to predict the flexural strength and force-displacement response of post-tensioned masonry. Experimental study is carried out to better understand the behavior of post-tensioned masonry walls and also to evaluate the accuracy of the proposed design procedure and expressions. The book also includes an introduction to current research on unbounded post-tensioned masonry walls, together with an extensive analysis of previously published test results.

Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1991 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Modelling of Concrete and Concrete Structures written by Günther Meschke and published by CRC Press. This book was released on 2022-05-22 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Modelling of Concrete and Concrete Structures contains the contributions to the EURO-C 2022 conference (Vienna, Austria, 23-26 May 2022). The papers review and discuss research advancements and assess the applicability and robustness of methods and models for the analysis and design of concrete, fibre-reinforced and prestressed concrete structures, as well as masonry structures. Recent developments include methods of machine learning, novel discretisation methods, probabilistic models, and consideration of a growing number of micro-structural aspects in multi-scale and multi-physics settings. In addition, trends towards the material scale with new fibres and 3D printable concretes, and life-cycle oriented models for ageing and durability of existing and new concrete infrastructure are clearly visible. Overall computational robustness of numerical predictions and mathematical rigour have further increased, accompanied by careful model validation based on respective experimental programmes. The book will serve as an important reference for both academics and professionals, stimulating new research directions in the field of computational modelling of concrete and its application to the analysis of concrete structures. EURO-C 2022 is the eighth edition of the EURO-C conference series after Innsbruck 1994, Bad Gastein 1998, St. Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St. Anton am Arlberg 2014, and Bad Hofgastein 2018. The overarching focus of the conferences is on computational methods and numerical models for the analysis of concrete and concrete structures.

Download or read book Architecture and Engineering written by Oleg Kapliński and published by MDPI. This book was released on 2020-12-18 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is addressed to architects and civil engineers. Design and research are areas connecting their activities. The contents of the book confirm the fact that the interface between architecture and engineering is multidimensional. The ways of finding points of contact between the two industries are highlighted. This is favored by the dynamically changing reality, supported by new design paradigms and new research techniques. The multithreaded subject matter of the articles is reduced to six sections: Research Scopes, Methods, Design Aspects, Context, Nature of Research, and Economy and Cost Calculation. Each of the articles in these six blocks has its weight. And so, in the Nature of Research section, the following areas have been underscored: laboratory tests, in situ research, field investigations, and street perception experiments. The section Design Aspects includes design-oriented thinking, geometrical forms, location of buildings, cost prediction, attractor and distractor elements, and shaping spatial structures. The new design and research tools are an inspiration and a keystone bonding architects and engineers.

Download or read book Brick and Block Masonry From Historical to Sustainable Masonry written by Jan Kubica and published by CRC Press. This book was released on 2020-07-06 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - From Historical to Sustainable Masonry contains the keynote and semi-keynote lectures and all accepted regular papers presented online during the 17th International Brick and Block Masonry Conference IB2MaC (Kraków, Poland, July 5-8, 2020). Masonry is one of the oldest structures, with more than 6,000 years of history. However, it is still one of the most popular and traditional building materials, showing new and more attractive features and uses. Modern masonry, based on new and modified traditional materials and solutions, offers a higher quality of life, energy savings and more sustainable development. Hence, masonry became a more environmentally friendly building structure. Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will provide a very good platform for sharing knowledge and experiences, and for learning about new materials and technologies related to masonry structures. The book will be a valuable compendium of knowledge for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.

Download or read book Seismic Vulnerability Assessment and Retrofitting Strategies for Masonry Infilled Frame Building written by Andre Filipe Furtado and published by Springer Nature. This book was released on 2023-05-04 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on a comprehensive experimental characterization of the material, mechanical and dynamic properties of masonry infill walls. It analyses the critical parameters affecting their out-of-plane seismic behavior, including the effects of the panel support conditions, gravity load, and previous damage. Further, it offers an extensive review of infill masonry strengthening strategies and reports on the experimental assessment of various textile-reinforced mortar (TRM) strengthening solutions. It also presents the development, implementation and calibration of a numerical model to simulate the infill panels’ seismic behavior, with the corresponding findings of various tests to assess the seismic vulnerability of an infilled RC structure. All in all, this outstanding PhD thesis offers a comprehensive review of masonry infill walls, and a timely overview of numerical and experimental methods for testing and preventing the out-of-plane seismic collapse of RC buildings.

Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1976 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Repair and Retrofit of Unreinforced Masonry Walls written by Teymour Manzouri and published by . This book was released on 1995 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing. house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 25 (thesis year 1980) a total of 10,308 theses titles from 27 Canadian and 214 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 25 reports theses submitted in 1980, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.