Download or read book Experimental Comparison of SLR 1 and Recursive Descent Parsing with Pascal written by Martin William Smith and published by . This book was released on 1978 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 23 (thesis year 1978) a total of 10,148 theses titles from 27 Canadian and 220 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 23 reports these submitted in 1978, on occasion, certain universities do report theses submitted in previous years but not reported at the time.
Download or read book Parsing Techniques written by Dick Grune and published by Springer Science & Business Media. This book was released on 2007-10-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Grune and Jacobs’ brilliant work presents new developments and discoveries that have been made in the field. Parsing, also referred to as syntax analysis, has been and continues to be an essential part of computer science and linguistics. Parsing techniques have grown considerably in importance, both in computer science, ie. advanced compilers often use general CF parsers, and computational linguistics where such parsers are the only option. They are used in a variety of software products including Web browsers, interpreters in computer devices, and data compression programs; and they are used extensively in linguistics.
Download or read book Principles of Compiler Design written by Aho Alfred V and published by . This book was released on 1998 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Compiler Design written by Dick Grune and published by Springer Science & Business Media. This book was released on 2012-07-20 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Modern Compiler Design" makes the topic of compiler design more accessible by focusing on principles and techniques of wide application. By carefully distinguishing between the essential (material that has a high chance of being useful) and the incidental (material that will be of benefit only in exceptional cases) much useful information was packed in this comprehensive volume. The student who has finished this book can expect to understand the workings of and add to a language processor for each of the modern paradigms, and be able to read the literature on how to proceed. The first provides a firm basis, the second potential for growth.
Download or read book Engineering a Compiler written by Keith D. Cooper and published by Elsevier. This book was released on 2011-01-18 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: This entirely revised second edition of Engineering a Compiler is full of technical updates and new material covering the latest developments in compiler technology. In this comprehensive text you will learn important techniques for constructing a modern compiler. Leading educators and researchers Keith Cooper and Linda Torczon combine basic principles with pragmatic insights from their experience building state-of-the-art compilers. They will help you fully understand important techniques such as compilation of imperative and object-oriented languages, construction of static single assignment forms, instruction scheduling, and graph-coloring register allocation. - In-depth treatment of algorithms and techniques used in the front end of a modern compiler - Focus on code optimization and code generation, the primary areas of recent research and development - Improvements in presentation including conceptual overviews for each chapter, summaries and review questions for sections, and prominent placement of definitions for new terms - Examples drawn from several different programming languages
Download or read book Parsing Theory written by Seppo Sippu and published by Springer Science & Business Media. This book was released on 1990-11-14 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is Volume II of a two-volume monograph on the theory of deterministic parsing of context-free grammars. Volume I, "Languages and Parsing" (Chapters 1 to 5), was an introduction to the basic concepts of formal language theory and context-free parsing. Volume II (Chapters 6 to 10) contains a thorough treat ment of the theory of the two most important deterministic parsing methods: LR(k) and LL(k) parsing. Volume II is a continuation of Volume I; together these two volumes form an integrated work, with chapters, theorems, lemmas, etc. numbered consecutively. Volume II begins with Chapter 6 in which the classical con structions pertaining to LR(k) parsing are presented. These include the canonical LR(k) parser, and its reduced variants such as the LALR(k) parser and the SLR(k) parser. The grammarclasses for which these parsers are deterministic are called LR(k) grammars, LALR(k) grammars and SLR(k) grammars; properties of these grammars are also investigated in Chapter 6. A great deal of attention is paid to the rigorous development of the theory: detailed mathematical proofs are provided for most of the results presented.
Download or read book Crafting a Compiler written by Charles N. Fischer and published by Benjamin-Cummings Publishing Company. This book was released on 1988 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software -- Programming Languages.
Download or read book Generalized LR Parsing written by Masaru Tomita and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Generalized LR parsing algorithm (some call it "Tomita's algorithm") was originally developed in 1985 as a part of my Ph.D thesis at Carnegie Mellon University. When I was a graduate student at CMU, I tried to build a couple of natural language systems based on existing parsing methods. Their parsing speed, however, always bothered me. I sometimes wondered whether it was ever possible to build a natural language parser that could parse reasonably long sentences in a reasonable time without help from large mainframe machines. At the same time, I was always amazed by the speed of programming language compilers, because they can parse very long sentences (i.e., programs) very quickly even on workstations. There are two reasons. First, programming languages are considerably simpler than natural languages. And secondly, they have very efficient parsing methods, most notably LR. The LR parsing algorithm first precompiles a grammar into an LR parsing table, and at the actual parsing time, it performs shift-reduce parsing guided deterministically by the parsing table. So, the key to the LR efficiency is the grammar precompilation; something that had never been tried for natural languages in 1985. Of course, there was a good reason why LR had never been applied for natural languages; it was simply impossible. If your context-free grammar is sufficiently more complex than programming languages, its LR parsing table will have multiple actions, and deterministic parsing will be no longer possible.
Download or read book Efficient Parsing for Natural Language written by Masaru Tomita and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parsing Efficiency is crucial when building practical natural language systems. 'Ibis is especially the case for interactive systems such as natural language database access, interfaces to expert systems and interactive machine translation. Despite its importance, parsing efficiency has received little attention in the area of natural language processing. In the areas of compiler design and theoretical computer science, on the other hand, parsing algorithms 3 have been evaluated primarily in terms of the theoretical worst case analysis (e.g. lXn», and very few practical comparisons have been made. This book introduces a context-free parsing algorithm that parses natural language more efficiently than any other existing parsing algorithms in practice. Its feasibility for use in practical systems is being proven in its application to Japanese language interface at Carnegie Group Inc., and to the continuous speech recognition project at Carnegie-Mellon University. This work was done while I was pursuing a Ph.D degree at Carnegie-Mellon University. My advisers, Herb Simon and Jaime Carbonell, deserve many thanks for their unfailing support, advice and encouragement during my graduate studies. I would like to thank Phil Hayes and Ralph Grishman for their helpful comments and criticism that in many ways improved the quality of this book. I wish also to thank Steven Brooks for insightful comments on theoretical aspects of the book (chapter 4, appendices A, B and C), and Rich Thomason for improving the linguistic part of tile book (the very beginning of section 1.1).
Download or read book Programming Language Pragmatics written by Michael Scott and published by Elsevier. This book was released on 2015-11-30 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming Language Pragmatics, Fourth Edition, is the most comprehensive programming language textbook available today. It is distinguished and acclaimed for its integrated treatment of language design and implementation, with an emphasis on the fundamental tradeoffs that continue to drive software development.The book provides readers with a solid foundation in the syntax, semantics, and pragmatics of the full range of programming languages, from traditional languages like C to the latest in functional, scripting, and object-oriented programming. This fourth edition has been heavily revised throughout, with expanded coverage of type systems and functional programming, a unified treatment of polymorphism, highlights of the newest language standards, and examples featuring the ARM and x86 64-bit architectures. - Updated coverage of the latest developments in programming language design, including C & C++11, Java 8, C# 5, Scala, Go, Swift, Python 3, and HTML 5 - Updated treatment of functional programming, with extensive coverage of OCaml - New chapters devoted to type systems and composite types - Unified and updated treatment of polymorphism in all its forms - New examples featuring the ARM and x86 64-bit architectures
Download or read book Programming Language Pragmatics written by Michael Scott and published by Morgan Kaufmann. This book was released on 2009-03-23 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming Language Pragmatics, Third Edition, is the most comprehensive programming language book available today. Taking the perspective that language design and implementation are tightly interconnected and that neither can be fully understood in isolation, this critically acclaimed and bestselling book has been thoroughly updated to cover the most recent developments in programming language design, inclouding Java 6 and 7, C++0X, C# 3.0, F#, Fortran 2003 and 2008, Ada 2005, and Scheme R6RS. A new chapter on run-time program management covers virtual machines, managed code, just-in-time and dynamic compilation, reflection, binary translation and rewriting, mobile code, sandboxing, and debugging and program analysis tools. Over 800 numbered examples are provided to help the reader quickly cross-reference and access content. This text is designed for undergraduate Computer Science students, programmers, and systems and software engineers. - Classic programming foundations text now updated to familiarize students with the languages they are most likely to encounter in the workforce, including including Java 7, C++, C# 3.0, F#, Fortran 2008, Ada 2005, Scheme R6RS, and Perl 6. - New and expanded coverage of concurrency and run-time systems ensures students and professionals understand the most important advances driving software today. - Includes over 800 numbered examples to help the reader quickly cross-reference and access content.
Download or read book Compiler Compilers and High Speed Compilation written by Dieter Hammer and published by Springer Science & Business Media. This book was released on 1989 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances and problems in the field of compiler compilers are the subject of the 2nd CCHSC Workshop which took place in Berlin, GDR, in October 1988. The 18 papers which were selected for the workshop are now included in this volume, among them three invited papers. They discuss the requirements, properties and theoretical aspects of compiler compilers as well as tools and metatools for software engineering. The papers cover a wide spectrum in the field of compiler compilers ranging from overviews of existing compiler compilers and engineering of compiler compilers to special problems of attribute evaluation generation and code generation. In connection with compiler compiler projects means of supporting high speed compilation are pointed out. Special attention is given to problems of incremental compilation.
Download or read book The Functional Treatment of Parsing written by René Leermakers and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parsing technology traditionally consists of two branches, which correspond to the two main application areas of context-free grammars and their generalizations. Efficient deterministic parsing algorithms have been developed for parsing programming languages, and quite different algorithms are employed for analyzing natural language. The Functional Treatment of Parsing provides a functional framework within which the different traditional techniques are restated and unified. The resulting theory provides new recursive implementations of parsers for context-free grammars. The new implementations, called recursive ascent parsers, avoid explicit manipulation of parse stacks and parse matrices, and are in many ways superior to conventional implementations. They are applicable to grammars for programming languages as well as natural languages. The book has been written primarily for students and practitioners of parsing technology. With its emphasis on modern functional methods, however, the book will also be of benefit to scientists interested in functional programming. The Functional Treatment of Parsing is an excellent reference and can be used as a text for a course on the subject.
Download or read book Crafting a Compiler with C written by Charles N. Fischer and published by Addison-Wesley. This book was released on 1991-01-01 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extremely practical, hands-on approach to building compilers using the C programming language includes numerous examples of working code from a real compiler and covers such advanced topics as code generation, optimization, and real-world parsing. It is an ideal reference and tutorial. 0805321667B04062001
Download or read book Documentation Abstracts written by and published by . This book was released on 1991 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding and Writing Compilers written by Richard Bornat and published by Scholium International. This book was released on 1979 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
