Download or read book Experimental and Analytical Study of Integral abutment Bridges written by Brad Harold Sayers and published by . This book was released on 2000 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral-abutment bridges eliminate the expansion joints that are generally used to accommodate bridge length changes due to daily and annual temperature variations. Additional stresses and displacements due to the thermal loading are induced in these indeterminate structures that are not typically associated with bridge structures supported on pins and rollers. The goal of this research was to determine the effects of the thermal loading on two integral-abutment bridges. Extensive field monitoring was conducted on two, in-service, skewed, integral-abutment bridges located in central Iowa. The experimental program included long-term monitoring of longitudinal and transverse abutment displacements, relative displacements of the superstructure over the pier caps, strains in selected steel HP-shaped piles supporting the abutments, strains in several PC girders, bridge member temperatures, and end fixity of selected piles and girders in the abutments. The experimental temperature and displacement data was used to calibrate an ANSYS, finite-element model for each of the two monitored bridge structures. Experimental strains were verified and maximum strains due to the thermal loading were predicted for various members using the finite-element models.

Download or read book Experimental and Analytical Investigations of Piles and Abutments of Integral Bridges written by Sami Arsoy and published by . This book was released on 2002 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research investigated, through experimental and analytical studies, the complex interactions that take place between the structural components of an integral bridge and the adjoining soil. The ability of piles and abutments to withstand thermally induced cyclic loads was investigated by conducting large-scale cyclic load tests. Three pile types and three integral abutments with hinges were tested in the laboratory. Experiments simulated 75 years of bridge life. Numerical analyses were conducted to analyze the interactions among the abutment, the approach fill, the foundation soil, and the foundation piles. The results indicated that H-piles are most suitable for supporting integral abutments. Concrete piles and pipe piles were too stiff in response to repeated lateral loads, resulting in tension cracks at the connection with the abutment. Further, a hinge in the integral abutment effectively reduces pile stresses by absorbing some of the rotational movement.

Download or read book Numerical and Experimental Analysis of Integral Abutment Bridge written by Yasser A. Khodair and published by . This book was released on 2004 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Design of Integral Abutment Bridges written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2016-11-12 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although integral abutments bridges have been used successfully for 50 years, there are no uniform standards or policies regarding permissible bridge lengths, skews, details or design procedures. Their implementation is not an exact science, but rather a matter of intuition, experimentation and observation. Analysis and Design of Integral Abutment Bridges five-part treatment starts with a clear and rigorous with the types of Integral Abutment Bridges their common problems and code applications. This is quickly followed by applications for analytical methods and computer software including Lateral Load Analysis Techniques and Nonlinear Analysis of Integral Abutment Bridges. Next, the third part on the Methods of Design and Structural Details includes Foundations, Backfill and a section on Beam Design including steel, cast-in-place concrete beams and precast/prestressed concrete beams. With this book in hand, structural and bridge engineers will find a brief and valuable guide illustrating how these concepts are successfully applied in the real world. The latest published results on experimental, analytical, and field studies on the behaviour of integral abutment bridges and their components Unified guidelines based on activities such as the AASHTO/NCHRP joint taskforce, LRFD specs and FHWA-sponsored research study on Jointless Bridges The book contains sufficient coverage of the most critical behavioural aspects of integral abutment bridges, namely: Interaction between the foundation piles, the integral abutment, and the surrounding ground under cyclic loading due to temperature effects, dynamic earthquake loading, and shrinkage/creep Abutment displacements and associated earth pressure distribution Settlement of the approach fill

Download or read book Field Study of Integral Abutment Bridges written by Matthew Earl Thomas and published by . This book was released on 1999 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The experimental investigation consisted of determining longitudinal and transverse abutment movements, strains in H-shaped steel piles, strains in prestressed concrete girders, temperature distributions, and the fixity of the piles and girders in the abutment. Data was collected to measure effects of daily and seasonal temperature variations. A large volume of data was collected and analyzed. Preliminary results show that the bridges are performing satisfactorily with no sign of distress. In addition to providing experimental evidence of the behavior of the two bridges, the data will be used to calibrate analytical models in subsequent research to be conducted on these bridges.

Download or read book Long Term Behavior of Integral Abutment Bridges written by Robert J. Frosch and published by Joint Transportation Research Program. This book was released on 2011-08-15 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral abutment (IA) construction has become the preferred method over conventional construction for use with typical highway bridges. However, the use of these structures is limited due to state mandated length and skew limitations. To expand their applicability, studies were implemented to define limitations supported by rational analysis rather than simply engineering judgment. Previous research investigations have resulted in larger length limits and an overall better understanding of these structures. However, questions still remain regarding IA behavior; specifically questions regarding long-term behavior and effects of skew. To better define the behavior of these structures, a study was implemented to specifically investigate the long term behavior of IA bridges. First, a field monitoring program was implemented to observe and understand the in-service behavior of three integral abutment bridges. The results of the field investigation were used to develop and calibrate analytical models that adequately capture the long-term behavior. Second, a single-span, quarter-scale integral abutment bridge was constructed and tested to provide insight on the behavior of highly skewed structures. From the acquired knowledge from both the field and laboratory investigations, a parametric analysis was conducted to characterize the effects of a broad range of parameters on the behavior of integral abutment bridges. This study develops an improved understanding of the overall behavior of IA bridges. Based on the results of this study, modified length and skew limitations for integral abutment bridge are proposed. In addition, modeling recommendations and guidelines have been developed to aid designers and facilitate the increased use of integral abutment bridges.

Download or read book Behavior of High Performance Concrete Integral Abutment Bridges written by David Jonathan Knickerbocker and published by . This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Performance of Steel Plate Girder Bridges with Integral Abutments written by U. S. Department Transportation and published by CreateSpace. This book was released on 2013-04-24 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the results of a pilot study on the seismic behavior and response of steel bridges with integral abutments. Analytical investigations were conducted on computational models of steel bridges with integral abutments to determine their seismic behavior as a system and to develop seismic design guidelines. The effect of the superstructure flexibility due to inadequate embedment length was investigated using 3D finite element models. This flexibility, modeled as translational and rotational springs, proved to have significant effect on the overall bridge dynamic characteristics in terms of periods and critical mode shapes. Lateral and longitudinal load paths and the seismic response were investigated using modal pushover and nonlinear time history analyses. A limited investigation on the effect of skew was conducted on a single-span integral abutment bridge. A procedure for incorporating the system level damping due to the yielding and inelastic responses of various components was proposed for use in the seismic analysis. Based on the analytical investigations and available experimental research, guidelines for the seismic analysis and design of integral abutment bridges were developed.

Download or read book Integral Bridges written by George L. England and published by Thomas Telford. This book was released on 2000 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work was commissioned by the Highways Agency to produce guidance for bridge designers by addressing the thermally induced soil/structure integration problem created by environmental changes of temperature and the associated cyclical displacements imposed on the granular backfill to the bridge abutments. It develops a better theoretical understanding of the cyclic performance, in particular the strain racheting in the backfill soil when in contact with a stiff structure. It also identifies the governing soil parameters and examines their influence in the interaction problem, develops numerical modelling procedures to predict interactive soil behaviour, and identifies and quantifies the controlling features of bridge structures relevant to the interaction problem.

Download or read book Pile Design and Tests for Integral Abutment Bridges written by and published by . This book was released on 1987 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Analysis and Design of Deep Foundations written by Murad Abu-Farsakh and published by Springer. This book was released on 2017-07-11 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on “Advances in Analysis and Design of Deep Foundations” contains 22 technical papers which cover various aspects of analysis and design of deep foundations based on full-scale field testing, numerical modeling, and analytical solutions. The technical papers are 8-10 pages long that present the results and findings from research as well as practical-oriented studies on deep foundations that are of interest to civil/geotechnical engineering community. The topics cover a wide spectrum of applications that include evaluation of the axial and lateral capacity of piles, pile group effects, evaluation of the increase in pile capacity with time (or pile setup), influence of excavation on pile capacity, study the behavior of pile raft caisson foundations, evaluate the bearing capacity and settlement of piles from cone penetration tests, etc. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.

Download or read book Numerical and Field Data Analysis of Integral Abutment Bridges written by Beth Ann Wright and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Highway Bridges written by Richard M. Barker and published by John Wiley & Sons. This book was released on 2021-03-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest in bridge design and analysis—revised to reflect the eighth edition of the AASHTO LRFD specifications Design of Highway Bridges: An LRFD Approach, 4th Edition, offers up-to-date coverage of engineering fundamentals for the design of short- and medium-span bridges. Fully updated to incorporate the 8th Edition of the AASHTO Load and Resistance Factor Design Specifications, this invaluable resource offers civil engineering students and practitioners a a comprehensive introduction to the latest construction methods and materials in bridge design, including Accelerated Bridge Construction (ABC), ultra high-performance concrete (UHPC), and Practical 3D Rigorous Analysis. This updated Fourth Edition offers: Dozens of end-of-chapter worked problems and design examples based on the latest AASHTO LRFD Specifications. Access to a Solutions Manual and multiple bridge plans including cast-in-place, precast concrete, and steel multi-span available on the Instructor’s companion website From gaining base knowledge of the AASHTO LRFD specifications to detailed guidance on highway bridge design, Design of Highway Bridges is the one-stop reference for civil engineering students and a key study resource for those seeking engineering licensure through the Principles and Practice of Engineering (PE) exam.

Download or read book Jointless and Smoother Bridges written by Robert J. Frosch and published by . This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Integral abutment bridges have been used in the United States for decades. By eliminating expensive expansion joints, the piles supporting the end bent accommodate the total thermal movement of the bridge. Currently, integral bridges are designed based upon experience, and a rational design specification has not been developed. Furthermore, the interaction of the abutment, pile, and soil remains uncertain. A better understanding regarding the behavior of this system is needed. The objective of this research is to evaluate the behavior of the integral abutment-pile system and evaluate any limitations of its use. To achieve this objective, two phases of research were conducted. The first phase was a field study that investigated the in-service pile behavior of four integral abutment bridges. The second phase was an experimental study that was used to evaluate the capability of piles typically used in integral abutment bridges. Nine low-cycle, large amplitude lateral displacement pile tests were conducted. Throughout both phases, analytical investigations were also conducted. To develop simplified modeling techniques that sufficiently account for soil-pile interaction, the piles supporting abutments were analytically modeled and calibrated based on the field and experimental results. A parametric study was also performed with variables including pile type, pile orientation, axial load, pile length, and soil type. The results of these phases were evaluated and design recommendations were developed based on these results. Overall, the design recommendations provide for an extension in the length limits often used for integral bridges. The extension of these limits can result in a reduction in bridge construction and maintenance costs for a large number of structures that cannot currently be built using this structural system.

Download or read book Topics on the Dynamics of Civil Structures Volume 1 written by Juan Caicedo and published by Springer Science & Business Media. This book was released on 2012-04-06 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics on the Dynamics of Civil Structures, Volume 1, Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, the first volume of six from the Conference, brings together 45 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Human Induced Vibrations Bridge Dynamics Operational Modal Analysis Experimental Techniques and Modeling for Civil Structures System Identification for Civil Structures Method and Technologies for Bridge Monitoring Damage Detection for Civil Structures Structural Modeling Vibration Control Method and Approaches for Civil Structures Modal Testing of Civil Structures

Download or read book Topics on the Dynamics of Civil Structures Volume 1 written by J.M. Caicedo and published by Springer Science & Business Media. This book was released on 2012-04-05 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics on the Dynamics of Civil Structures, Volume 1, Proceedings of the 30th IMAC, A Conference and Exposition on Structural Dynamics, 2012, the first volume of six from the Conference, brings together 45 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on: Human Induced Vibrations Bridge Dynamics Operational Modal Analysis Experimental Techniques and Modeling for Civil Structures System Identification for Civil Structures Method and Technologies for Bridge Monitoring Damage Detection for Civil Structures Structural Modeling Vibration Control Method and Approaches for Civil Structures Modal Testing of Civil Structures

Download or read book Analysis of Integral Abutment Bridges written by Henry W. Lee and published by . This book was released on 1972 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study is to investigate the stresses induced by thermal movements in the girder and upper portion of steel bearing piles of integral abutment-type bridges.