Download or read book Experimental and Analytical Studies of Hydrocarbon Yields Under Dry Steam and Steam with propane Distillation written by Namit Jaiswal and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation study has shown oil production is accelerated when propane is used as an additive during steam injection. To better understand this phenomenon, distillation experiments were performed using San Ardo crude oil (12°API). For comparison purposes, three distillation processes were investigated: dry-, steam-, and steam-propanedistillation, the latter at the propane-to-steam mass ratio of 0.05 at steam injection rate 0.5 g/min. Two sets of the distillation experiments were carried out. In the first set of experiments, the distillation temperatures ranged from 115°C to 300°C. Distillation pressures ranged from 0 psig to 998 psig for steam- and steam-propane distillation. The temperature-pressure combination used represented 15°C superheated steam conditions. In the second set of experiments, the distillation temperatures ranged from 220°C to 300°C at 260 psig. The temperature pressure combination used represented field conditions for crude oil. For both conditions, the cell was kept at each temperature plateau (cut) until no increase occurs in distillation yields. Distillation yields were collected at each cut, and the volume and weight of water and hydrocarbon measured. Based on these experiments, a thermodynamic modeling framework was developed that describes distillation effect and oil production for steam distillation experiments. The model is based on composition of crude oil, molecular weight of heavy fraction. The analytical model results are compared against the experimental data for synthetic crude and crude oil to verify the validity of the model. Main results of the study may be summarized as follows. The yields for steam distillation for saturated conditions of Tsat+15°C and Psat is 10% and with addition of 5% of propane to steam no significant increase occurs in distillation yields. The yields for steam distillation for field conditions of 260 psig and temperature range (220 ~300°C) is 18 % and with addition of 5% of propane to steam no significant increase in distillation yields. The results indicate that propane has minimal distillation effect on the heavy oil. This occurs possibly because of lesser amount of light fractions in the heavy oil that enhance the separation of components in the oil caused by the concentration gradient.

Download or read book Experimental and Analytical Modeling Studies of Steam Injection with Hydrocarbon Additives to Enhance Recovery of San Ardo Heavy Oil written by Roly Simangunsong and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental and analytical studies have been carried out to better understand production mechanisms of heavy oil under steam injection with propane and petroleum distillate as steam additives. The studies have been conducted for heavy oil from San Ardo field (12°API, 2800 cp at 53.3°C), under current reservoir conditions. The experiments consist of injecting pure steam, steam-propane, and steam-petroleum distillate into a vertical cell containing a mixture of sand, water and San Ardo oil. The injection cell (68.58 cm long with an ID of 7.376 cm) is placed inside a vacuum jacket, set at the reservoir temperature of 53.3°C. Superheated steam at 230°C is injected at 5.5 ml/min (cold-water equivalent) simultaneously with propane or a petroleum distillate slug. The cell outlet pressure is maintained at 260 psig. Six runs were performed, two runs using pure steam, two steam-propane runs using 5:100 propane: steam mass ratio, and two steam-petroleum distillate runs using 5:100 petroleum distillate:steam mass ratio. We develop a simplified analytical model that describes steam front advancement and oil production for the 1D displacement experiments. The model incorporates heat and material balance, fillup time and Darcy's law pertaining to the injection cell. The analytical model results are compared against the experimental data to verify the validity of the model. The main results of the study are as follows. First, experimental results indicate that compared to pure steam injection, oil production was accelerated by 30% for 5:100 propane:steam injection and 38% for 5:100 petroleum distillate:steam injection respectively. Second, steam injectivity with steam-propane and steam-petroleum distillate increases to 1.4 and 1.9 times respectively, compared with pure steam injection. Third, steam front advancement and oil production data are in good agreement with results based on the new analytical model. The analytical model indicates that the oil production acceleration observed is due to oil viscosity reduction resulting from the addition of propane and petroleum distillate to the steam. Oil viscosity at the initial temperature with pure steam injection is 2281 cp, which is reduced to 261 cp with steam-propane injection and 227 cp with steam-petroleum distillate injection.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Study of Oil Yields and Properties of Light and Medium Venezuelan Crude Oils Under Steam and Steam propane Distillation written by Joyce Vivia Plazas Garcia and published by . This book was released on 2002 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental and Analytical Modeling Studies of Distillation Near the Steam oil Interface written by Gunawan Sutadiwiria and published by . This book was released on 1998 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Current Abstracts written by and published by . This book was released on 1996-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book How Tobacco Smoke Causes Disease written by United States. Public Health Service. Office of the Surgeon General and published by . This book was released on 2010 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report considers the biological and behavioral mechanisms that may underlie the pathogenicity of tobacco smoke. Many Surgeon General's reports have considered research findings on mechanisms in assessing the biological plausibility of associations observed in epidemiologic studies. Mechanisms of disease are important because they may provide plausibility, which is one of the guideline criteria for assessing evidence on causation. This report specifically reviews the evidence on the potential mechanisms by which smoking causes diseases and considers whether a mechanism is likely to be operative in the production of human disease by tobacco smoke. This evidence is relevant to understanding how smoking causes disease, to identifying those who may be particularly susceptible, and to assessing the potential risks of tobacco products.

Download or read book Masters Theses and Doctoral Dissertations in the Pure and Applied Sciences Accepted by Colleges and Universities of the United States written by and published by . This book was released on 1971 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Master s Theses and Doctoral Dissertations in the Pure and Applied Sciences written by and published by . This book was released on 1971 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oil Shales and Tar Sands written by United States. Department of Energy and published by . This book was released on 1977 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Studies from the Organic Division of the Department of Chemistry University of Illinois written by University of Illinois (Urbana-Champaign campus) Dept. of chemistry and published by . This book was released on 1946 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reprinted collection of articles issued from the Organic Division of the Dept. of Chemistry.

Download or read book Journal of the Society of Chemical Industry written by and published by . This book was released on 1925 with total page 1658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1977 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1984 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analytical Pyrolysis of Natural Organic Polymers written by S.C. Moldoveanu and published by Elsevier. This book was released on 1998-11-11 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical pyrolysis is one of the many tools utilized for the study of natural organic polymers. This books describes in three parts the methodology of analytical pyrolysis, the results of pyrolysis for a variety of biopolymers, and several practical applications of analytical pyrolysis on natural organic polymers and their composite materials. Analytical pyrolysis methodology covers two distinct subjects, the instrumentation used for pyrolysis and the analytical methods that are applied for the analysis of the pyrolysis products. A variety of pyrolytic techniques and of analytical instruments commonly coupled with pyrolysis devices are given.The description of the results of pyrolysis for biopolymers and some chemically modified natural organic polymers is the core of the book. The main pyrolysis products of numerous compounds as well as the proposed mechanisms for their pyrolysis are described. In this part an attempt is made to present as much as possible the chemistry of the pyrolytic process of natural organic polymers.The applications of analytical pyrolysis include topics such as polymer detection used for example in forensic science, structure elucidation of specific polymers, and identification of small molecules present in polymers (anti-oxidants, plasticizers, etc.). Also, the degradation during heating is a subject of major interest in many practical applications regarding the physical properties of polymers. The applications to composite polymeric materials are in the fields of classification of microorganisms, study of a variety of biological samples, study of fossil materials, etc. Analytical pyrolysis can also be used for obtaining information on the burning area generate pyrolysates that have complex compositions. Their analysis is important in connection with health issues, environmental problems, and taste of food and cigarettes.Features of this book:• Presents analytical pyrolysis as a uniform subject and not as a conglomerate of scientific papers.• Puts together in an organized manner a large volume of available information in this specific field.• Provides original results which address subjects with relatively scarce information in literature.• Gives original views on subjects such as the parallel between the pyrolytic process and the ion fragmentation in mass spectrometry.• Includes the role of pyrolysis in the burning process.The three parts of the book are covered in 18 chapters, each divided into sections. Some sections are further divided by particular subjects. References are given for each chapter, and an effort has been made to include as much as possible from the available representative information. A few unpublished personal results are also included.

Download or read book Master s Theses Directories written by and published by . This book was released on 2003 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".