Download or read book Combustion of Liquid Fuel Sprays written by Alan Williams and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion of Liquid Fuel Sprays outlines the fundamentals of the combustion of sprays in a unified way which may be applied to any technological application. The book begins with a discussion of the general nature of spray combustion, the sources of liquid fuels used in spray combustion, biomass sources of liquid fuels, and the nature and properties of fuel oils. Subsequent chapters focus on the properties of sprays, the atomization of liquid fuels, and the theoretical modeling of the behavior of a spray flame in a combustion chamber. The nature and control of pollutants from spray combustion, the formation of deposits in oil-fired systems, and the combustion of sprays in furnaces and engines are elucidated as well. The text is intended for students undertaking courses or research in fuel, combustion, and energy studies.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Industrial Combustion Pollution and Control written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference overflows with an abundance of experimental techniques, simulation strategies, and practical applications useful in the control of pollutants generated by combustion processes in the metals, minerals, chemical, petrochemical, waste, incineration, paper, glass, and foods industries. The book assists engineers as they attempt to meet e

Download or read book Fluid Mechanics and Fluid Power Volume 4 written by Krishna Mohan Singh and published by Springer Nature. This book was released on with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.

Download or read book Combustion Theory written by Forman A. Williams and published by CRC Press. This book was released on 2018-03-05 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Theory delves deeper into the science of combustion than most other texts and gives insight into combustions from a molecular and a continuum point of view. The book presents derivations of the basic equations of combustion theory and contains appendices on the background of subjects of thermodynamics, chemical kinetics, fluid dynamics, and transport processes. Diffusion flames, reactions in flows with negligible transport and the theory of pre-mixed flames are treated, as are detonation phenomena, the combustion of solid propellents, and ignition, extinction, and flamibility pehnomena.

Download or read book Challenges and Opportunities in Industrial and Mechanical Engineering A Progressive Research Outlook written by S M Pandey and published by CRC Press. This book was released on 2024-06-24 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Present time Industry 4.0 is the need of all industries because it connects industries to AI, high productivity, safety, and flexibility, ensures the 100% utilization of resources across diverse manufacturing systems, and could accelerate normal manufacturing systems to advanced manufacturing systems by using robotics, additive manufacturing, and many more. In this book, the collection of selected papers is constituted from the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), which was at the National Institute of Technology (NIT), Patna, India from August 5 to 7, 2021. This conference brings together all academic people, industry experts, and researchers from India as well as abroad for involving thoughts on the needs, challenges, new technology, opportunities threats in the current transformational field of aspire. This book deliberates on several elements and their relevance to hard-core areas of industrial and mechanical engineering including design engineering, production engineering, indus trial engineering, automobile engineering, thermal and fluid engineering, mechatronics control robotics, interdisciplinary, and many new emerging topics that keep potential in several areas of applications. This book focuses on providing versatile knowledge of cut ting-edge practices to all readers, helping to develop a clear vision toward Industry 4.0, robotics automation, and additive manufacturing in this demanding and evolving time. The book will be a treasured reference for students, researchers, and professionals inter ested in mechanical engineering and allied fields.

Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.

Download or read book Emerging Technologies and Techniques in Porous Media written by Derek B. Ingham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat and fluid flow in fluid-saturated porous media has become increas ingly more attractive to researchers and thus it has become a very pro ductive field for many researchers and practical engineers in very diverse range of fields. The great interest in the topic stems from its widespread number of different practical applications in modern industries and in many environmental issues, such as nuclear waste management, build ing thermal insulators, geothermal power plants, grain storage, etc. In building sciences and thermal insulation engineering, an appreciable in sulating effect has been derived by placing porous material in the gap between the cavity walls and multishield structures of nuclear reactors between the pressure vessel and the reactor. Geophysical applications include modeling of the spread of pollutants (e. g. radioactive mater ial), water movements in geothermal reservoirs, enhanced recovery of petroleum reservoirs, etc. These, and many other, important practical applications have resulted in a rapid expansion of research in the general area of porous media and thus generated a vast amount of both theor etical and experimental research work. It has attracted the attention of industrialists, engineers and scientists from many varying disciplines, such as applied mathematics, chemical, civil, environmental, mechanical and nuclear engineering, geothermal physics, food science, medicine, etc. This book contains some of the contributions to the NATO Advanced Study Institute on Emerging Technologies and Techniques in Porous Media that was held in Neptun-Olimp, Constanta, Black Sea, Romania on 9-20 June, 2003.

Download or read book Oxygen Enhanced Combustion written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2010-12-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion - new technology producing oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include numerous environmental benefits as well as increased energy efficiency and productivity. The text compiles information about using oxygen to enhance high temperature industrial heating and melting processes - serving as a unique resource for specialists implementing the use of oxygen in combustion systems; combustion equipment and industrial gas suppliers; researchers; funding agencies for advanced combustion technologies; and agencies developing regulations for safe, efficient, and environmentally friendly combustion systems. Oxygen-Enhanced Combustion: Examines the fundamentals of using oxygen in combustion, pollutant emissions, oxygen production, and heat transfer Describes ferrous and nonferrous metals, glass, and incineration Discusses equipment, safety, design, and fuels Assesses recent trends including stricter environmental regulations, lower-cost methods of producing oxygen, improved burner designs, and increasing fuel costs Emphasizing applications and basic principles, this book will act as the primary resource for mechanical, chemical, aerospace, and environmental engineers and scientists; physical chemists; fuel technologists; fluid dynamists; and combustion design engineers. Topics include: General benefits Economics Potential problems Pollutant emissions Oxygen production Adsorption Air separation Heat transfer Ferrous metals Melting and refining processes Nonferrous metals Minerals Glass furnaces Incineration Safety Handling and storage Equipment design Flow controls Fuels

Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 1994 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 37 (thesis year 1992) reports a total of 12,549 thesis titles from 25 Canadian and 153 US universities (theses submitted in previous years but only now reported are indicated by the thesis year shown in parenthesis). The organization, like that of past years, consists of thesis titles arrange

Download or read book Proceedings of the 30th 1995 National Heat Transfer Conference written by Alfonso Ortega (Ph. D.) and published by . This book was released on 1995 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emerging Technologies and Techniques in Porous Media written by Derek B. Ingham and published by Springer Science & Business Media. This book was released on 2004-02-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of heat and fluid flow in fluid-saturated porous media is applicable in a very wide range of fields, with practical applications in modern industry and environmental areas, such as nuclear waste management, the construction of thermal insulators, geothermal power, grain storage and many more. The vast amount of theoretical and experimental work reported has attracted the attention of industrialists, engineers, applied mathematicians, chemical, civil, environmental, mechanical and nuclear engineers, physicists, food scientists, medical researchers, etc. This book covers the full range of theoretical, computational and experimental approaches to the subject, grouped into reviews of: fundamentals, stability, anisotropy, permeability and non-equilibrium, applications, and experimental porous media.

Download or read book Advances in Bioceramics and Porous Ceramics written by Roger Narayan and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a one-stop resource, compiling current research on bioceramics and porous ceramics. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. It includes papers from two symposia: "Porous Ceramics: Novel Developments and Applications" and "Next Generation Bioceramics." Articles are logically organized to provide insight into various aspects of bioceramics and porous ceramics. This is a valuable, up-to-date resource for researchers working in ceramics engineering.

Download or read book Advanced Thermodynamics for Engineers written by D. Winterbone and published by Butterworth-Heinemann. This book was released on 1996-11-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the basic theories of thermodynamics are adequately covered by a number of existing texts, there is little literature that addresses more advanced topics. In this comprehensive work the author redresses this balance, drawing on his twenty-five years of experience of teaching thermodynamics at undergraduate and postgraduate level, to produce a definitive text to cover thoroughly, advanced syllabuses. The book introduces the basic concepts which apply over the whole range of new technologies, considering: a new approach to cycles, enabling their irreversibility to be taken into account; a detailed study of combustion to show how the chemical energy in a fuel is converted into thermal energy and emissions; an analysis of fuel cells to give an understanding of the direct conversion of chemical energy to electrical power; a detailed study of property relationships to enable more sophisticated analyses to be made of both high and low temperature plant and irreversible thermodynamics, whose principles might hold a key to new ways of efficiently covering energy to power (e.g. solar energy, fuel cells). Worked examples are included in most of the chapters, followed by exercises with solutions. By developing thermodynamics from an explicitly equilibrium perspective, showing how all systems attempt to reach a state of equilibrium, and the effects of these systems when they cannot, the result is an unparalleled insight into the more advanced considerations when converting any form of energy into power, that will prove invaluable to students and professional engineers of all disciplines.

Download or read book Radiative Heat Transfer in Turbulent Combustion Systems written by Michael F. Modest and published by Springer. This book was released on 2016-01-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction reviews why combustion and radiation are important, as well as the technical challenges posed by radiation. Emphasis is on interactions among turbulence, chemistry and radiation (turbulence-chemistry-radiation interactions – TCRI) in Reynolds-averaged and large-eddy simulations. Subsequent chapters cover: chemically reacting turbulent flows; radiation properties, Reynolds transport equation (RTE) solution methods, and TCRI; radiation effects in laminar flames; TCRI in turbulent flames; and high-pressure combustion systems. This Brief presents integrated approach that includes radiation at the outset, rather than as an afterthought. It stands as the most recent developments in physical modeling, numerical algorithms, and applications collected in one monograph.

Download or read book Proceedings of the ASME Heat Transfer Division written by R. A. Nelson and published by . This book was released on 1998 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: