Download or read book Excluded Volume Effects in Bottle brush Polymers and Wetting Transitions of Ionic Solutions written by Natasha Alexandrovna Denesyuk and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Excluded Volume Effects in Polymer Solutions written by Lothar Schäfer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Schäfer gives a concise overview of the static equilibrium properties of polymer solutions. In the first part diagrammatic perturbation theory is derived from scratch. The second part illustrates the basic ideas of the renormalization group (RG). The crucial role of dilation invariance is stressed. The more efficient method of dimensional regularization and minimal subtractions is worked out in part three. The fourth part contains a unified evaluation of the theory to the one loop level. All the important experimental quantities are discussed in detail, and the results are compared extensively to experiment. Empirical methods of data analysis are critically discussed. The final (fifth) part is devoted to extensions of theory. The first three parts of this book may serve as the basis of a course. Parts four and five are hoped to be useful for detailed quantitative evaluations of experiments.
Download or read book Excluded volume effects in polymer solutions written by Eamon Francis Jeffers and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2004 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Excluded Volume Effects in Polymer Solutions written by and published by . This book was released on 1999 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of excluded volume on the coil size of dilute linear polymers was investigated by off-lattice Monte Carlo simulations. The radius of gyration R{sub g} was evaluated for a wide range of chain lengths at several temperatures and at the athermal condition. The theta temperature and the corresponding theta chain dimensions were established for the system, and the dependence of the size expansion factor, a{sub s} = R{sub g} /(R{sub g}){sub {theta}}, on chain length N and temperature T was examined. For long chains and at high temperatures, a{sub s} is a function of N/N{sub s}2 alone, where the length scale N{sub s}2 depends only on T. The form of this simulations-based master function compares favorably with [alpha]{sub s}(M/M{sub s}2), an experimental master curve for linear polymers in good solvents, where M{sub s}2 depends only on polymer-solvent system. Comparisons when N{sub s}2(T) and M{sub s}2(system) are reduced to common units, numbers of Kuhn steps, strongly indicate that coil expansion in even the best of good solvents is small relative to that expected for truly athermal solutions. An explanation for this behavior is proposed, based on what would appear to be an inherent difference in the equation of state properties for polymeric and monomeric liquids.
Download or read book Responsive Polymer Materials written by Sergiy Minko and published by Wiley-Blackwell. This book was released on 2006-01-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book offers practical insights into the latest developments in responsive polymers, i.e., polymers engineered to alter structure and properties in response to environmental inputs. The book features original design, methodological, and application data. Chemists, biochemists, and electronic engineers will find here important new material to understand and characterize molecular and submolecular assemblies that enable the fabrication of switch-driven polymer systems. Beginning from basic research and moving to single-molecular design, the contributors illuminate switching in self-assembled aggregates of polymer chains. These analyses are extended to the switching/changing of macroscopic properties in bulk and thin films. The book demonstrates how the properties of responsive polymers such as morphology, wetting behavior, adhesion, roughness, permeability etc., can be modified to create and improve biomedical devices, chemical sensors, microfluidic devices, drug delivery systems, adhesion systems, and self-regulating colloids. For specialists investigating the potential of molecular and submolecular polymer design, this book is essential.
Download or read book Polymer Solutions written by Iwao Teraoka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Solutions: An Introduction to Physical Properties offers a fresh, inclusive approach to teaching the fundamentals of physical polymer science. Students, instructors, and professionals in polymer chemistry, analytical chemistry, organic chemistry, engineering, materials, and textiles will find Iwao Teraoka’s text at once accessible and highly detailed in its treatment of the properties of polymers in the solution phase. Teraoka’s purpose in writing Polymer Solutions is twofold: to familiarize the advanced undergraduate and beginning graduate student with basic concepts, theories, models, and experimental techniques for polymer solutions; and to provide a reference for researchers working in the area of polymer solutions as well as those in charge of chromatographic characterization of polymers. The author’s incorporation of recent advances in the instrumentation of size-exclusion chromatography, the method by which polymers are analyzed, renders the text particularly topical. Subjects discussed include: Real, ideal, Gaussian, semirigid, and branched polymer chains Polymer solutions and thermodynamics Static light scattering of a polymer solution Dynamic light scattering and diffusion of polymers Dynamics of dilute and semidilute polymer solutions Study questions at the end of each chapter not only provide students with the opportunity to test their understanding, but also introduce topics relevant to polymer solutions not included in the main text. With over 250 geometrical model diagrams, Polymer Solutions is a necessary reference for students and for scientists pursuing a broader understanding of polymers.
Download or read book Giant Molecules written by A. I?U. Grosberg and published by World Scientific. This book was released on 2011 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: ?? Giant molecules are important in our everyday life. But, as pointed out by the authors, they are also associated with a culture. What Bach did with the harpsichord, Kuhn and Flory did with polymers. We owe a lot of thanks to those who now make this music accessible ??Pierre-Gilles de GennesNobel Prize laureate in Physics(Foreword for the 1st Edition, March 1996)This book describes the basic facts, concepts and ideas of polymer physics in simple, yet scientifically accurate, terms. In both scientific and historic contexts, the book shows how the subject of polymers is fascinating, as it is behind most of the wonders of living cell machinery as well as most of the newly developed materials. No mathematics is used in the book beyond modest high school algebra and a bit of freshman calculus, yet very sophisticated concepts are introduced and explained, ranging from scaling and reptations to protein folding and evolution. The new edition includes an extended section on polymer preparation methods, discusses knots formed by molecular filaments, and presents new and updated materials on such contemporary topics as single molecule experiments with DNA or polymer properties of proteins and their roles in biological evolution.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Light Scattering from Polymer Solutions and Nanoparticle Dispersions written by Wolfgang Schärtl and published by Springer Science & Business Media. This book was released on 2007-08-13 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light scattering is a very powerful method for characterizing the structure of polymers and nanoparticles in solution. As part of the Springer Laboratory series, this book provides a simple-to-read and illustrative textbook probing the seemingly very complicated topic of light scattering from polymers and nanoparticles in dilute solution, and goes further to cover some of the latest technical developments in experimental light scattering.
Download or read book Polyelectrolytes written by Visakh P. M. and published by Springer. This book was released on 2014-09-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable reference source to graduate and post graduate students, engineering students, research scholars polymer engineers from industry. The book provides the reader with current developments of theoretical models describing the thermodynamics polyelectrolytes as well as experimental findings. A particular emphasis is put on the rheological description of polyelectrolyte solutions and hydrogels.
Download or read book Aqueous Lubrication Natural And Biomimetic Approaches written by Nicholas D Spencer and published by World Scientific. This book was released on 2014-03-24 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Man lubricates mostly with oil. Nature lubricates exclusively with water. Pure water is a poor lubricant, but the addition of proteins, especially glycoproteins, can modify surfaces to make them far more lubricating at slow speeds. Understanding how nature does this, and the physical structures involved, is not only important for the understanding of diseases such as osteoarthritis, but also essential for the successful application of articulating implants, such as hips and knees, as well as the development of medical devices such as catheters and contact lenses. A host of important applications of water-based lubrication are already in place in the personal care and food industries, and further industrial applications of water-based lubrication could have a significant positive impact on the environment.This book is the first of its kind. It brings together the latest research in biological and biomimetic, water-based lubrication and is authored by the world's experts in the field.
Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.
Download or read book Introduction to Soft Matter written by Ian W. Hamley and published by John Wiley & Sons. This book was released on 2013-03-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to this exciting and relativelynew subject with chapters covering natural and synthetic polymers,colloids, surfactants and liquid crystals highlighting the many andvaried applications of these materials. Written by an expert in thefield, this book will be an essential reference for people workingin both industry and academia and will aid in understanding of thisincreasingly popular topic. Contains a new chapter on biological soft matter Newly edited and updated chapters including updated coverageof recent aspects of polymer science. Contain problems at the end of each chapter to facilitateunderstanding
Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.
Download or read book Polymer Characterisation written by B.J. Hunt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers continue to play an ever increasing role in the modern world. In fact it is quite inconceivable to most people that we could ever have existed of the increased volume and variety of materials without them. As a result currently available, and the diversity of their application, characterisation has become an essential requirement of industrial and academic laboratories in volved with polymeric materials. On the one hand requirements may come from polymer specialists involved in the design and synthesis of new materials who require a detailed understanding of the relationship between the precise molecular architecture and the properties of the polymer in order to improve its capabilities and range of applications. On the other hand, many analysts who are not polymer specialists are faced with the problems of analysing and testing a wide range of polymeric materials for quality control or material specification purposes. We hope this book will be a useful reference for all scientists and techno or industrial laboratories, logists involved with polymers, whether in academic and irrespective of their scientific discipline. We have attempted to include in one volume all of the most important techniques. Obviously it is not possible to do this in any great depth but we have encouraged the use of specific examples to illustrate the range of possibilities. In addition numerous references are given to more detailed texts on specific subjects, to direct the reader where appropriate. The book is divided into II chapters.
Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.
