Download or read book Exchange Comparison Two Real Time Operating Systems on a Micro Controller System written by Junyi Xu and published by diplom.de. This book was released on 2014-04-11 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: Embedded systems are becoming an integral part of commercial products today. Mobile phones, watches, cars and flights controllers etc. are to name a few. There are critical elements between the system hardware and the software, one of the primary is the Real Time Operating System which ensures control, compatibility and timing. The Real Time Operating System has to interface/communicate well with the hardware below it to prevent casualty, and with the software above to ensure the applications running in a proper way. Therefore, more and more attention is being paid to the porting relationship between Real Time Operating System and Application Software by engineers in embedded field. Comparing and evaluating the performance of different Real Time Operating Systems is getting more important. Measuring is the only way to provide useful information, for example, which Real Time Operating System is best suitable for a specific hardware configuration. The purpose of this thesis paper is to find an approach to exchange MicroC/OS-II with NOKIA Car-kit OS on a micro-controller system. Besides porting MicroC/OS-II to the micro-controller system, the interfaces to higher level application software should be generated to adapt the application software to MicroC/OS-II. Finally, evaluate the advantages and disadvantages of them. In chapter 1, a brief introduction is provided. In chapter 2, the concept of RTOS and the development of Real Time Kernel are introduced. The field on which RTOS is always focusing and why RTOS is especially important in Embedded Systems are explained. The essential performance and the differences among several RTOS are also discussed in this chapter. In chapter 3, the micro Real Time Kernel MicroC/OS-II is introduced in details. The speciality of MicroC/OS-II and the services provided from MicroC/OS-II are explained. Also, the micro-controllers that MicroC/OS-II supported are introduced. In chapter 4, NOKIA Car-kit OS (NOKIA Car-kit Operating System) is introduced. The development history and some of important service mechanism are introduced briefly. In chapter 5, the evaluation and comparison of these two Operating Systems are made. The most important characteristics, the advantages and disadvantages for both of these two RTOS are discussed. In chapter 6, the software-mapping layer is discussed in detail. In this part, the whole software development procedure is explained. Issues from problem analyse, [...]

Download or read book Real Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl

Download or read book Hands On RTOS with Microcontrollers written by Brian Amos and published by Packt Publishing Ltd. This book was released on 2020-05-15 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.

Download or read book Real time Operating System Services for Networked Embedded Systems written by Khawar M. Zuberi and published by . This book was released on 1998 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical UML Statecharts in C C written by Miro Samek and published by CRC Press. This book was released on 2008-10-03 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical UML Statecharts in C/C++ Second Edition bridges the gap between high-level abstract concepts of the Unified Modeling Language (UML) and the actual programming aspects of modern hierarchical state machines (UML statecharts). The book describes a lightweight, open source, event-driven infrastructure, called QP that enables direct manual coding UML statecharts and concurrent event-driven applications in C or C++ without big tools. This book is presented in two parts. In Part I, you get a practical description of the relevant state machine concepts starting from traditional finite state automata to modern UML state machines followed by state machine coding techniques and state-machine design patterns, all illustrated with executable examples. In Part II, you find a detailed design study of a generic real-time framework indispensable for combining concurrent, event-driven state machines into robust applications. Part II begins with a clear explanation of the key event-driven programming concepts such as inversion of control ( Hollywood Principle ), blocking versus non-blocking code, run-to-completion (RTC) execution semantics, the importance of event queues, dealing with time, and the role of state machines to maintain the context from one event to the next. This background is designed to help software developers in making the transition from the traditional sequential to the modern event-driven programming, which can be one of the trickiest paradigm shifts. The lightweight QP event-driven infrastructure goes several steps beyond the traditional real-time operating system (RTOS). In the simplest configuration, QP runs on bare-metal microprocessor, microcontroller, or DSP completely replacing the RTOS. QP can also work with almost any OS/RTOS to take advantage of the existing device drivers, communication stacks, and other middleware. The accompanying website to this book contains complete open source code for QP, ports to popular processors and operating systems, including 80x86, ARM Cortex-M3, MSP430, and Linux, as well as all examples described in the book.

Download or read book MicroC OS II written by Jean Labrosse and published by CRC Press. This book was released on 2002-02-05 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: MicroC/OS II Second Edition describes the design and implementation of the MicroC/OS-II real-time operating system (RTOS). In addition to its value as a reference to the kernel, it is an extremely detailed and highly readable design study particularly useful to the embedded systems student. While documenting the design and implementation of the ker

Download or read book Cyber Physical Systems and Control II written by Dmitry G. Arseniev and published by Springer Nature. This book was released on 2023-01-20 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains selected research papers presented at the 2nd International Conference on Cyber-Physical Systems and Control (CPS&C’2021) which was held from 29 June to 2 July 2021 in St. Petersburg, Russia. The CPS&C’2021 Conference continues the series of international conferences that began in 2019 when the first International Conference on Cyber-Physical Systems and Control (CPS&C’2019) took place. Cyber-physical systems (CPSs) considered a modern and rapidly emerging generation of systems with integrated wide computational, information processing, and physical capabilities that can interact with humans through many new modalities and application areas of implementation. The book covers the latest advances, developments and achievements in new theories, algorithms, models, and applications of prospective problems associated with CPSs with an emphasis on control theory and related areas. The multidisciplinary fundamental scientific and engineering principles that underpin the integration of cyber and physical elements across all application areas are discussed in the book chapters. The materials of the book may be of interest to scientists and engineers working in the field of cyber-physical systems, systems analysis, control systems, computer technologies, and similar fields.

Download or read book Real Time Systems Development with RTEMS and Multicore Processors written by Gedare Bloom and published by CRC Press. This book was released on 2020-11-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proliferation of multicore processors in the embedded market for Internet-of-Things (IoT) and Cyber-Physical Systems (CPS) makes developing real-time embedded applications increasingly difficult. What is the underlying theory that makes multicore real-time possible? How does theory influence application design? When is a real-time operating system (RTOS) useful? What RTOS features do applications need? How does a mature RTOS help manage the complexity of multicore hardware? Real-Time Systems Development with RTEMS and Multicore Processors answers these questions and more with exemplar Real-Time Executive for Multiprocessor Systems (RTEMS) RTOS to provide concrete advice and examples for constructing useful, feature-rich applications. RTEMS is free, open-source software that supports multi-processor systems for over a dozen CPU architectures and over 150 specific system boards in applications spanning the range of IoT and CPS domains such as satellites, particle accelerators, robots, racing motorcycles, building controls, medical devices, and more. The focus of this book is on enabling real-time embedded software engineering while providing sufficient theoretical foundations and hardware background to understand the rationale for key decisions in RTOS and application design and implementation. The topics covered in this book include: Cross-compilation for embedded systems development Concurrent programming models used in real-time embedded software Real-time scheduling theory and algorithms used in wide practice Usage and comparison of two application programmer interfaces (APIs) in real-time embedded software: POSIX and the RTEMS Classic APIs Design and implementation in RTEMS of commonly found RTOS features for schedulers, task management, time-keeping, inter-task synchronization, inter-task communication, and networking The challenges introduced by multicore hardware, advances in multicore real-time theory, and software engineering multicore real-time systems with RTEMS All the authors of this book are experts in the academic field of real-time embedded systems. Two of the authors are primary open-source maintainers of the RTEMS software project.

Download or read book Proceedings of the Nat l Symposium written by and published by Allied Publishers. This book was released on with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Internet of Things written by Fatima Hussain and published by Springer. This book was released on 2017-03-27 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the building blocks and introductory business models for Internet of Things (IoT). The author provide an overview of the entire IoT architecture and constituent layers, followed by detail description of each block . Various inter-connecting technologies and sensors are discussed in context of IoT networks. In addition to this, concepts of Big Data and Fog Computing are presented and characterized as per data generated by versatile IoT applications . Smart parking system and context aware services are presented as an hybrid model of cloud and Fog Afterwards, various IoT applications and respective business models are discussed. Finally, author summarizes the IoT building blocks and identify research issues in each, and suggest potential research projects worthy of pursuing.

Download or read book Safety for Future Transport and Mobility written by Hans-Leo Ross and published by Springer Nature. This book was released on 2020-09-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides background information about technical solutions, processes and methodology to develop future automated mobility solutions. Beginning from the legal requirements as the minimum tolerable risk level of the society, the book provides state-of-the-art risk-management methodologies. The system engineering approach based on todays engineering best practices enhanced by principles derived from cybernetics. The approach derived from the typical behaviour of a human driver in public road traffic to a cybernetical based system engineering approach. Beyond the system engineering approach, a common behaviour model for the operational domain will show aspects how to extend the system engineering model with principles of cybernetics. The role and the human factors of road traffic participants and drivers of motor vehicles are identified and several viewpoints for different observers show how such mixed traffic scenarios could be assessed and optimised. The influence of the changing mobility demands of the society and the resulting changes to the origination of producer, owner, driver and supplier show aspects for future liability and risk share option for new supply chains. Examples from various industries provide some well-proven engineering principles how to adapt those for the future mobility for the benefit of the users. The aim of the book is to raise awareness that the safety provided by a product, a means of transport or a system up to an entire traffic system depends on the capabilities of the various actors. In addition to the driver and passengers, there are also other road users, maintenance personnel and service providers, who must have certain abilities to act safely in traffic. These are also the capabilities of the organisation, not only the organisation that develops or brings the product to market, but also the organisation that is responsible for the operation and the whole lifecycle of the products. The book is for people who want to get involved in the mobility of the future. People, that have ideas to become a player who want to help shape the future mobility of society and who want to bring responsible solutions for users into the market.

Download or read book Digital Computer Applications to Process Control written by R. Isermann and published by Elsevier. This book was released on 2014-05-20 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Computer Applications to Process Control presents the developments in the application of digital computers to the control of technical processes. This book discusses the control principles and includes as well direct feedback and feed forward control as monitoring and optimization of technical processes. Organized into five parts encompassing 77 chapters, this book begins with an overview of the two categories of microprocessor systems. This text then discusses the concept of a sensor controlled robot that adapts to any task, assures product quality, and eliminates machine tending labor. Other chapters consider the ergonomic adaptation of the human operator's working conditions to his abilities. This book discusses as well the self-tuning regulator for liquid level in the acetic acid evaporator and its actual performance in production. The final chapter deals with algebraic method for deadbeat control of multivariable linear time-invariant continuous systems. This book is a valuable resource for electrical and control engineers.

Download or read book 2nd International Congress of Electrical and Computer Engineering written by Muhammet Nuri Seyman and published by Springer Nature. This book was released on with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Digital System Design Use of Microcontroller written by Shenouda Dawoud and published by CRC Press. This book was released on 2022-09-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.

Download or read book Innovations in Electrical and Electronic Engineering written by Saad Mekhilef and published by Springer Nature. This book was released on 2022-04-13 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book features selected high-quality papers presented at International Conference on Electrical and Electronics Engineering (ICEEE 2022), jointly organized by University of Malaya and Bharath Institute of Higher Education and Research India during January 8–9, 2022, at NCR New Delhi, India. The book focuses on current development in the fields of electrical and electronics engineering. The book covers electrical engineering topics—power and energy including renewable energy, power electronics and applications, control, and automation and instrumentation—and covers the areas of robotics, artificial intelligence and IoT, electronics devices, circuits and systems, wireless and optical communication, RF and microwaves, VLSI, and signal processing. The book is beneficial for readers from both academia and industry.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: