Download or read book Examples for the Design of Structural Concrete with Strut and tie Models written by American Concrete Institute. Convention and published by . This book was released on 2002 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prepared by members of ACI Subcommittee 445-1, Strut and Tie Models, for sessions at the Fall Convention in Phoenix, October 27 to November 1, 2002, and sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion and ACI Committee 318-E, Shear and Torsion."
Download or read book Structural Concrete written by Salah El-Metwally and published by CRC Press. This book was released on 2017-10-02 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the application of strut-and-tie models (STM) for the design of structural concrete. It presents state-of-the-art information, from fundamental theories to practical engineering applications, and also provides innovative solutions for many design problems that are not otherwise achievable using the traditional methods.
Download or read book Design Examples for Strut and tie Models written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 61 is a continuation of fib Bulletin 16 (2002). Again the bulletin’s main objective is to demonstrate the application of the FIP Recommendations “Practical Design of Structural Concrete”, and especially to illustrate the use of strut-and-tie models to design discontinuity regions (D-regions) in concrete structures. Bulletin 61 presents 14 examples, most of which are existing structures built in recent years. Although some of the presented structures can be considered to be quite important and, in some instances, complex, the chosen examples are not intended to be exceptional. The main aim is to look at specific design aspects, by selecting D-regions of the presented structures that are designed and detailed according to the proposed design principles and specifications for the use of strut-and-tie models. Two papers at the end of the bulletin deal with the role of concrete tension fields in modelling with strut-and-tie models, and summarize the experiences gained by the Working Group in applying strut-and-tie models to the examples in the bulletin. It is hoped that fib Bulletin 61 will be of interest to engineers involved in the design of concrete structures, supporting the use of more consistent design and detailing tools such as strut-and-tie models.
Download or read book Further Examples for the Design of Structural Concrete with Strut and tie Models written by Karl-Heinz Reineck and published by . This book was released on 2010 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete written by Salah El-Din E. El-Metwally and published by CRC Press, Taylor & Francis Group, CRC Press is. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "6.4.3 Example on Design of a Deep Beam with Eccentric Large Openings
Download or read book Design Examples Design Examples for the 1996 FIP Recommendations Practical Design of Structural Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2002-01-01 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1996 FIP Recommendations Practical Design of Structural Concretewere finally published by SETO in September 1999. They had been developed based on the 1990 CEB-FIP Model Code. The main objective of this Bulletin is now to demonstrate by practical examples the application of these recommendations, and especially to illustrate the use of strut-and-tie models for designing discontinuity regions in concrete structures. These examples represent also a continuation of the 1990 FIP Handbook on Practical Design that had been based on the former (1984) version of the recommendations. Most of the examples are recently built existing structures. Although some of them may be considered as quite important, the chosen examples are by no means exceptional. The technical report does not deal with the discussion of aesthetic or general conceptual aspects. On the contrary, the main aim is to treat particular design aspects by selecting local regions of the chosen structures, that are then designed and detailed following the design principles and specifications proposed in the 1996 FIP Recommendations mentioned above. The document is believed to be of interest to all engaged in the design of structural concrete. It hopefully supports the use of more consistent design and detailing tools like strut-and-tie models.
Download or read book Strut and tie Models for the Design of Structural Concrete written by Kurt Schafer and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Concrete written by M. Nadim Hassoun and published by John Wiley & Sons. This book was released on 2015-03-13 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up to date structural concrete text, with the latest ACI revisions Structural Concrete is the bestselling text on concrete structural design and analysis, providing the latest information and clear explanation in an easy to understand style. Newly updated to reflect the latest ACI 318-14 code, this sixth edition emphasizes a conceptual understanding of the subject, and builds the student's body of knowledge by presenting design methods alongside relevant standards and code. Numerous examples and practice problems help readers grasp the real-world application of the industry's best practices, with explanations and insight on the extensive ACI revision. Each chapter features examples using SI units and US-SI conversion factors, and SI unit design tables are included for reference. Exceptional weather-resistance and stability make concrete a preferred construction material for most parts of the world. For civil and structural engineering applications, rebar and steel beams are generally added during casting to provide additional support. Pre-cast concrete is becoming increasingly common, allowing better quality control, the use of special admixtures, and the production of innovative shapes that would be too complex to construct on site. This book provides complete guidance toward all aspects of reinforced concrete design, including the ACI revisions that address these new practices. Review the properties of reinforced concrete, with models for shrink and creep Understand shear, diagonal tension, axial loading, and torsion Learn planning considerations for reinforced beams and strut and tie Design retaining walls, footings, slender columns, stairs, and more The American Concrete Institute updates structural concrete code approximately every three years, and it's critical that students learn the most recent standards and best practices. Structural Concrete provides the most up to date information, with intuitive explanation and detailed guidance.
Download or read book Design of Concrete Structures written by Arthur H. Nilson and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the 2002 ACI Code, this text covers the behavior and design aspects of concrete and provides examples and homework problems. It covers strut-and-tie models, and presents the basic mechanics of structural concrete and methods for the design of individual members for bending, shear, torsion, and axial force.
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Reinforced Concrete with Worked Examples written by Franco Angotti and published by Springer Nature. This book was released on 2022-06-07 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the design of reinforced and prestressed concrete structures according to the latest advances both in the field of materials, concrete and steel, and in the field of structural analysis. These advances have been included in current version of Eurocode 2, which is taken as reference. All subjects are presented starting from their theoretical bases and passing to corresponding EC2 formulations. A large part of the book is concerned with the most innovative EC2 parts, like nonlinear structural analyses, second-order effects, punching and strut-and-tie models. The textbook is equipped with numerous worked examples, useful for the reader who is not familiar with the design of reinforced and prestressed concrete structures by the Limit State Method. Examples have been chosen among the most frequent cases of the professional practice. Thanks to this structure, it can be of interest both to structural designers for their professional training and to students of engineering and architecture schools for their studies. The volume contains twelve chapters, which follow the same structure of EC2, except for chapter 6 (dealing with prestressed concrete structures), which does not match any chapter of EC2, as prestressed concrete is considered in EC2 as a particular case of reinforced concrete, and corresponding formulations are shed over different chapters.
Download or read book Concrete Beams with Openings written by M. A. Mansur and published by CRC Press. This book was released on 1999-01-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
Download or read book Examples of the Design of Reinforced Concrete Buildings to BS8110 Fourth Edition written by C.E. Reynolds and published by CRC Press. This book was released on 1992-08-13 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition of this well-known book makes available to structural design engineers a wealth of practical advice on effective design of concrete structures. It covers the complete range of concrete elements and includes numerous data sheets, charts and examples to help the designer. It is fully updated in line with the relevant British Standards and Codes of Practice.
Download or read book Design of Structural Elements written by Chanakya Arya and published by CRC Press. This book was released on 2009-05-07 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design, basic structural concepts, and material properties. After an introduction and overview of structural design, the book is conveniently divided into sections based on British Standards and Eurocodes.
Download or read book Structural Concrete written by M. Nadim Hassoun and published by John Wiley & Sons. This book was released on 2012-06-14 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: The popular, easily accessible guide to the design of reinforced concrete structures now updated and revised Structural Concrete, Fifth Edition provides complete guidance to the analysis and design of reinforced and prestressed concrete structures. This new edition brings all material up to date while maintaining the book's practical, logical, easy-to-follow approach. Coverage includes the latest ACI 318 - 11 code rules, emphasizing the code's strength approach and strain limits. Additional codes, standards, and specifications, as well as material properties and specific loads and safety provisions are also examined in detail. Drawing on decades of experience in industry and academia, the authors include numerous SI unit examples and design tables along with step-by-step instructions on how to analyze and design for each type of structural member. They clearly explain all key concepts one should know before tackling design formulas, and supplement the discussion with helpful end-of-chapter summaries, references, and problems. New and updated material in this edition includes: The application of shear design to beams with variable length in actual structure The design of deep beams employing ACI and AASHTO strut-and-tie approach The design of stepped-type reinforced concrete stairs, not covered anywhere else Seismic design and analysis utilizing the IBC 2012 and ASCE 7-10 code The design of curved beams subject to flexure, shear, and torsion Prestressed concrete bridge design according to AASHTO specifications Examples for predicting shrinkage and creep of concrete in both U.S. and SI units Structural Concrete, Fifth Edition arms civil and structural engineers with a complete set of tools for designing concrete structures with confidence. It is also an excellent resource for students of civil engineering.
Download or read book Computational Analysis and Design of Bridge Structures written by Chung C. Fu and published by CRC Press. This book was released on 2014-12-11 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain Confidence in Modeling Techniques Used for Complicated Bridge StructuresBridge structures vary considerably in form, size, complexity, and importance. The methods for their computational analysis and design range from approximate to refined analyses, and rapidly improving computer technology has made the more refined and complex methods of ana
