Download or read book Evolutionary Manufacturing Design and Operational Practices for Resource and Environmental Sustainability written by Kamalakanta Muduli and published by Wiley-Scrivener. This book was released on 2024-08-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to document the use of digital technologies and the latest developments in mechanical and industrial engineering to enhance environmental and resource sustainability. As one of the highest resource priorities, this book documents helpful information on sustainable development and its impacts on products and consumption factors of a product's life cycle. Readers will understand human development goals that prevent system breakdown and the utilization of big data analytics in business trends for environmental sustainability. Key Features Include: - Delves into the impact of sustainable operational practices and supply chain management for Digital Technology techniques and the design for efficient remanufacturing processes - Provides information on advanced materials and developments for sustainable manufacturing, including an in-depth exploration of cutting-edge technology for synthesis processing, fabrication, and performance evaluation - Covers use, benefits, and issues of sustainable manufacturing practices digital technologies in the industry - Addresses aspects of sustainable innovation in mechanical design for nation-building - Talks about heat transfer and fluid flow concepts for sustainable product development and application from the construction of energy systems by enhancing the process of energy conversion by making it a renewable source

Download or read book Sustainable Manufacturing and Design written by Kaushik Kumar and published by Woodhead Publishing. This book was released on 2021-01-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response. Addresses methods to reduce energy and material waste through manufacturing design Helps to troubleshoot manufacturability problems that can arise in sustainable design Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject

Download or read book Sustainable Machining written by J. Paulo Davim and published by Springer. This book was released on 2017-03-19 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Download or read book Greener Manufacturing and Operations written by Joseph Sarkis and published by Routledge. This book was released on 2017-09-20 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely work examines one core corporate function that has a profound and direct impact on corporate environmental performance – manufacturing and operations. This area has been of concern in recent years to researchers and practitioners in fields ranging from the social and natural sciences to management and technical engineering. The book reflects this diversity with global contributions on topics such as design for the environment, total quality environmental management, green supply chains, reverse logistics, environmental management systems and standards, industrial ecology, closed-loop manufacturing, life-cycle management, pollution prevention (P2), environmental technologies and energy efficiency. The aim and scope of Greener Manufacturing and Operations is to capture state-of-the-art and future practices in environmental manufacturing and operations practices and issues in one concise volume. The book is therefore a fluid mix of case studies, empirical research, and applied theoretical works incorporating both conceptual ideas whose time will come to practical applications which managers and practitioners can apply immediately. Comprehensive in its coverage of the key issues, contributions range from a focus on the internal operations of a single function within an organization to a consideration of industrial manufacturing practices from a macro-economic level. A number of levels of decision-making are also represented: from long-term strategic issues such as supply chain design, to traditional short-term operations decision-making and planning issues such as production planning. Many of the principles developed and presented here can also be extended to the more general process management of service organizations. The book is organized into four major sections: operations strategy and policy; manufacturing and operations practice; tools for managing greener operations and manufacturing; and, finally, case studies. Greener Manufacturing and Operations will be an essential aid for managers, engineers, students, researchers, and consultants wishing to understand the various issues, principles, and tools for managing the operations and manufacturing function in a more environmentally-benign and sustainable manner.

Download or read book Re engineering Manufacturing for Sustainability written by Andrew Y. C. Nee and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing, etc.

Download or read book Sustainable Design and Manufacturing 2018 written by Dzung Dao and published by Springer. This book was released on 2018-11-30 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 5th International Conference on Sustainable Design and Manufacturing (SDM-18), held in Gold Coast, Australia in June 2018. The conference covered a wide range of topics, including: sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research on the circular economy. The corresponding application areas are wide and varied. The aim of cutting-edge research into sustainable design and manufacturing is to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. With these goals in mind, the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Mechatronics Evolution In Textile Design written by G.S.Mahadevan and published by Abhishek Publications. This book was released on 2024-06-01 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mechatronic Evolution in Textile Design" explores the transformative impact of integrating mechatronics-a multidisciplinary field combining mechanical engineering, electronics, computer science, and control engineering-into the textile design industry. This book provides an in-depth analysis of how advanced technologies are revolutionizing traditional textile manufacturing processes, leading to significant improvements in efficiency, precision, and innovation. It delves into the core principles of mechatronics and their application in textile machinery, illustrating how automation and intelligent systems enhance the design, production, and quality control of textiles. Through detailed case studies and examples, the book showcases the tangible benefits and the creative possibilities mechatronic advancements. unlocked by mechatronic advancements.

Download or read book Sustainable Design and Manufacturing 2020 written by Steffen G. Scholz and published by Springer Nature. This book was released on 2020-09-10 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of peer-reviewed papers, presented at the International Conference on Sustainable Design and Manufacturing (SDM 2020). Leading-edge research into sustainable design and manufacturing aims to enable the manufacturing industry to grow by adopting more advanced technologies and at the same time improve its sustainability by reducing its environmental impact. Relevant themes and topics include sustainable design, innovation and services; sustainable manufacturing processes and technology; sustainable manufacturing systems and enterprises; and decision support for sustainability. Application areas are wide and varied. The book provides an excellent overview of the latest developments in the sustainable design and manufacturing areas.

Download or read book Sustainable Manufacturing written by Rainer Stark and published by Springer. This book was released on 2017-01-16 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.

Download or read book Sustainability in Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenges of sustainable manufacturing were accepted by several research institutions at the Technical University Berlin and lead to the establishment of the Collaborative Research Center (Sfb) 281 Dissassembly Factories for the Recovery of Resources in Product and Material Cycles funded by the German Research Foundation in 1995. This book details the numerous scientific results that are now available after 12 years of research.

Download or read book Handbook on the Sustainable Supply Chain written by Joseph Sarkis and published by Edward Elgar Publishing. This book was released on 2019 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supply chain management has long been a feature of industry and commerce but, with increasing demands from consumers, producers are spending more time and money investing in ways to make supply chains more sustainable. This exemplary Handbook provides readers with a comprehensive overview of current research on sustainable supply chain management.

Download or read book Greener Manufacturing and Operations written by Joseph Sarkis and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This timely work examines one core corporate function that has a profound and direct impact on corporate environmental performance – manufacturing and operations. This area has been of concern in recent years to researchers and practitioners in fields ranging from the social and natural sciences to management and technical engineering. The book reflects this diversity with global contributions on topics such as design for the environment, total quality environmental management, green supply chains, reverse logistics, environmental management systems and standards, industrial ecology, closed-loop manufacturing, life-cycle management, pollution prevention (P2), environmental technologies and energy efficiency. The aim and scope of Greener Manufacturing and Operations is to capture state-of-the-art and future practices in environmental manufacturing and operations practices and issues in one concise volume. The book is therefore a fluid mix of case studies, empirical research, and applied theoretical works incorporating both conceptual ideas whose time will come to practical applications which managers and practitioners can apply immediately. Comprehensive in its coverage of the key issues, contributions range from a focus on the internal operations of a single function within an organization to a consideration of industrial manufacturing practices from a macro-economic level. A number of levels of decision-making are also represented: from long-term strategic issues such as supply chain design, to traditional short-term operations decision-making and planning issues such as production planning. Many of the principles developed and presented here can also be extended to the more general process management of service organizations. The book is organized into four major sections: operations strategy and policy; manufacturing and operations practice; tools for managing greener operations and manufacturing; and, finally, case studies. Greener Manufacturing and Operations will be an essential aid for managers, engineers, students, researchers, and consultants wishing to understand the various issues, principles, and tools for managing the operations and manufacturing function in a more environmentally-benign and sustainable manner."--Provided by publisher.

Download or read book Design and Manufacture for Sustainable Development written by Bernard Hon and published by John Wiley & Sons. This book was released on 2002-04-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture for Sustainable Development brings together a collection of papers from a conference held at the University of Liverpool in June 2002 that inspire the interchange of ideas on the theory, technology, tools, and methodology for the entire product life cycle within the framework of sustainable development. It also embraces key subjects including strategy, design, materials, manufacturing, packaging, distribution, disposal, recycling, and auditing. TOPICS COVERED INCLUDE: Philosophy of, and strategy for, sustainable technologies Design principles for sustainable development Sustainable manufacturing technologies Use of recycling/bio-degradable materials Re-use and recycling design and technologies Tools for sustainable product design Measurement and auditing Best practices and case studies Impact of emerging legislation International trends and future development. Sustainable development will have a fundamental impact on the engineering community since, through design and manufacture, we are responsible for the use of energy, materials, and processes for the complete product life cycle. This is an essential volume for the bookshelves of those wanting to be well informed about this evolving technology.

Download or read book Design for Environment Second Edition A Guide to Sustainable Product Development Eco Efficient Product Development written by Joseph Fiksel and published by Mcgraw-hill. This book was released on 2009-06-19 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: An in-depth roadmap to sustainable product development Drawing on the experiences of dozens of major corporations, Design for Environment, Second Edition, offers a business rationale for developing sustainable products and processes, as well as a comprehensive toolkit for practicing DFE in the context of product life-cycle management. Learn how environmental innovation creates business value, and helps companies to meet global energy and environmental challenges. Discover how to: Practice integrated product development and concurrent engineering Select appropriate metrics to represent product life-cycle performance Maintain and apply a portfolio of systematic Design for Environment strategies Use analysis methods to evaluate design performance and trade-offs Apply systems thinking to reduce the supply chain environmental footprint This book features in-depth case studies of DFE applications by industry leaders such as: Alcoa * American Electric Power * Caterpillar * Coca-Cola * ConAgra Foods * Dow Chemical Company * DuPont * Eli Lilly * Ford Motor Company * General Motors * Hewlett-Packard * Intel * JCPenney * Johnson & Johnson * Kimberly-Clark * McDonald's * Owens Corning * Patagonia * 3M Company * Xerox With all the recent talk about green technology and green jobs, Joseph Fiksel's book could not come at a better time. If your goal is to design and develop environmentally sustainable products that also drive shareholder value, then this book is a must read." Stuart Hart, S.C. Johnson Chair in Sustainable Global Enterprise, Cornell University, Author, “Capitalism at the Crossroads” Design for Environment shows clearly that aligning green design with innovation not only is possible, but is essential to remaining competitive in our brave new economy. This should be required reading for anyone who wants to understand the how to design for today's consumer — and tomorrow's. Joel Makower, Executive Editor, GreenBiz.com, Author, "Strategies for the Green Economy" A must read for all practitioners of a Design for Environment approach. This book makes the most compelling case yet for taking a more integrated and holistic approach to DFE – the bottom line! Green initiatives must increase profitability to be truly sustainable, and Dr. Fiksel provides the blueprint for how global companies are enhancing profits and winning in the marketplace by designing their way to competitive advantage. Jim Lime, Vice President, Environment, Health & Safety, ConAgra Foods Dr. Fiksel has developed a comprehensive and inspiring guide that provides a powerful case for integration of environmental principles into product development. Design for Environment is essential reading for any organization putting DFE into practice. Ken Strassner, Vice-President, Global Environment, Safety, Regulatory and Scientific Affairs, Kimberley-Clark Corporation Dr. Fiksel "hits the nail on the head" with this practical and informative approach to life-cycle design and management. A must read to help you achieve both exceptional environmental stewardship and exceptional business results. Joe Allen, General Manager and Director of Sustainable Development, Caterpillar Remanufacturing Division Joseph Fiksel has produced a masterful book that not only powerfully argues for Design for Environment, but also provides the roadmap and real-life examples that prove the point. This book arrives not a moment too soon for a stressed planet. Industry has the opportunity to re-think how we design, produce, sell and dispose of products, and this book provides the tools and best practices to accomplish a new and improved way of doing business. Jim Thomas, Vice President, Corporate Social Responsibility, JCPenney At a time when many companies are wrestling with the challenges of energy and environmental management, Design for Environment provides a unique resource—a clear and comprehensive guide to the tools and best practices that are essential for any business that aspires to be sustainable. Innovation will be the key to addressing global climate change and assuring future prosperity, and this book illuminates the path forward. Dennis Welch, Executive Vice President, Environment, Safety & Health and Facilities, American Electric Power Design for Environment is a must for those who want to move beyond talking about sustainability to driving sustainability. For those just starting on or already immersed in the sustainability journey, this text is a comprehensive, well written, and easy to read resource for understanding the “why”; developing the “what”; and implementing the “how”. Patty Calkins, Vice President, Environmental Health & Safety, Xerox The book offers important industry perspectives on how companies develop and design innovative solutions to complex environmental and societal challenges. It goes well beyond theory, offering case studies with quantifiable results that illustrate how companies can save money while improving the environment and helping local communities. It shows how companies of all types are using resources more efficiently, sometimes by teaming up with other industries, to achieve results that balance the triple bottom line of people, planet, and prosperity. This richly-detailed study should be of great interest to industry leaders, policymakers, scholars, and students alike. We are all fortunate to have Joseph Fiksel working on sustainable development. Andy Mangan, Executive Director, U.S. Business Council for Sustainable Development Sustainability has gone from a vague concept that was discussed in environmental forums to a means for improving business performance. Design for Environment is a cornerstone in communicating experience across various industry sectors about how environmental performance contributes to and becomes a basis for redefining our business processes. Dr. Joseph Fiksel has performed an important task in gathering these accomplishments into one publication, allowing us to benchmark ourselves against other companies. Steve Gillman, Executive Director, Corporate Health, Safety and Environment, Eli Lilly & Company Dr. Fiksel clearly states the urgency, summarizes DFE methods, and highlights today's real world examples of redesigning our industrial systems to create more value while conserving our dwindling natural resources. Ken Martchek, Manager, Life Cycle and Environmental Sustainability, Alcoa Inc.

Download or read book The Circular Economy written by Mika Sillanpaa and published by Academic Press. This book was released on 2019-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Circular Economy: Case Studies about the Transition from the Linear Economy explores examples of the circular economy in action. Unlike other books that provide narrow perceptions of wide-ranging and highly interconnected paradigms, such as supply chains, recycling, businesses models and waste management, this book provides a comprehensive overview of the circular economy from various perspectives. Its unique insights into the approaches, methods and tools that enable people to make the transformation to a circular economy show how recent research, trends and attitudes have moved beyond the "call to arms" approach to a level of maturity that requires sound scientific thinking. Compiles evidence through case studies that illustrate how individuals, organizations, communities and countries are transitioning to a circular economy Provides a theoretical and empirical summary of the circular economy that emphasizes what others are actually doing and planning Highlights achievements from industry, agriculture, forestry, energy, water and other sectors that show how circular principles are applicable, eco-friendly, profitable, and thus sustainable

Download or read book Sustainable Manufacturing written by Kapil Gupta and published by Elsevier. This book was released on 2021-03-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing examines the overall sustainability of a wide range of manufacturing processes and industrial systems. With chapters addressing machining, casting, additive and gear manufacturing processes; and hot topics such as remanufacturing, life cycle engineering, and recycling, this book is the most complete guide to this topic available. Drawing on experts in both academia and industry, coverage addresses theoretical developments and practical improvements from research and innovations. This unique book will advise readers on how to achieve sustainable manufacturing processes and systems, and further the clean and safe environment. This handbook is a part of the four volume set entitled Handbooks in Advanced Manufacturing. The other three address Advanced Machining and Finishing, Advanced Welding and Deforming, and Additive Manufacturing. Provides basic to advanced level information on various aspects of sustainable manufacturing Presents the strategies and techniques to achieve sustainability in numerous areas of manufacturing and industrial engineering such as environmentally benign machining, sustainable additive manufacturing, remanufacturing and recycling, sustainable supply chain, and life cycle engineering Combines contributions from experts in academia and industry with the latest research and case studies Explains how to attain a clean, green, and safe environment via sustainable manufacturing Presents recent developments and suggests future research directions

Download or read book Best Practices in Green Supply Chain Management written by Sadia Samar Ali and published by Emerald Group Publishing. This book was released on 2019-04-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Best Practices in Green Supply Chain Management uses present case studies from the Indian and Mexican manufacturing industries to offer new insights on the challenges of integrating environmental awareness into supply chain management operations in developing countries.