Download or read book Event triggered Control of Linear Systems with Application to Embedded Control Systems written by Wei Wu and published by . This book was released on 2014 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Event triggered Control of Linear Systems with Application to Embedded Control Systems written by Wei Wu and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Contributions to Networked and Event Triggered Control of Linear Systems written by María Guinaldo Losada and published by Springer. This book was released on 2016-05-28 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on a set of new techniques for resolving current issues in networked control systems. The main focus is on strategies for event-based control, for both centralized and decentralized architectures. The first part of the book addresses the problem of single-loop networked control systems and proposes an anticipative remote controller for dealing with delays and packet losses. The second part of the book proposes a distributed event-based control strategy for networked dynamical systems, which has been implemented in a test-bed of mobile robots, and provides readers with a thorough description of an interactive simulator used to validate the results. This thesis, examined at the Universidad Nacional de Educación a Distancia in 2013, received the award for best thesis in control engineering from the Control Engineering group of the Spanish Committee of Automatic Control in 2015.

Download or read book Event Triggered Control of Switched Linear Systems written by Jun Fu and published by Springer Nature. This book was released on 2021-04-12 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches its subject matter in a way that provides Lyapunov function analysis and event-triggered design methods for switched dynamic systems in terms of sampled-data control, hysteresis switching control, and fault-tolerant control. This book presents several novel design methods on event-triggered control of switched linear systems, in which the events inclusively consist of not only switching itself but events occurring as the switched systems evolve. The features of our approaches lie in threefold: i) In the framework of sampled-data control, a bond between the sampling period and the average dwell time of the asynchronous switched linear neutral systems is revealed, with which stabilization conditions are derived for periodic sampling and event-triggered sampling mechanisms, respectively. ii) New event-triggered control strategies are proposed for switched linear systems and switched delay systems including switched neutral systems. The Zeno phenomenon can be excluded easily since the constant threshold can guarantee the existence of minimum positive lower bound between two continuous sampling intervals. iii). Two new fault-tolerant control methods are presented for switched cascade systems, with structural uncertainties existing in both system matrices and input matrices of the linear subsystems, by using the average dwell-time techniques. The proposed control design works on both the switched systems with actuator faults and its nominal systems (i.e., without actuator faults) without necessarily changing any structures and/or parameters of the proposed controllers. This book presents several systematical analysis and design methods for event-triggered control of switched systems in terms of the Lyapunov-based stability. It is of great significance to theoretical research and practical applications for switched systems. The book provides a unified framework of sampled-data control, including periodic sampled-data control and event-triggered control, and fault-tolerant control of switched systems. It serves as a useful book for researchers and graduate students who are interested in knowing the state of the art of analysis and synthesis of switched systems. In addition, it is also a useful source of up-to-date design methods for researchers who study switched dynamic systems and graduate students of control theory and control engineering.

Download or read book Event Based Control and Signal Processing written by Marek Miskowicz and published by CRC Press. This book was released on 2018-09-03 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Event-based systems are a class of reactive systems deployed in a wide spectrum of engineering disciplines including control, communication, signal processing, and electronic instrumentation. Activities in event-based systems are triggered in response to events usually representing a significant change of the state of controlled or monitored physical variables. Event-based systems adopt a model of calls for resources only if it is necessary, and therefore, they are characterized by efficient utilization of communication bandwidth, computation capability, and energy budget. Currently, the economical use of constrained technical resources is a critical issue in various application domains because many systems become increasingly networked, wireless, and spatially distributed. Event-Based Control and Signal Processing examines the event-based paradigm in control, communication, and signal processing, with a focus on implementation in networked sensor and control systems. Featuring 23 chapters contributed by more than 60 leading researchers from around the world, this book covers: Methods of analysis and design of event-based control and signal processing Event-driven control and optimization of hybrid systems Decentralized event-triggered control Periodic event-triggered control Model-based event-triggered control and event-triggered generalized predictive control Event-based intermittent control in man and machine Event-based PID controllers Event-based state estimation Self-triggered and team-triggered control Event-triggered and time-triggered real-time architectures for embedded systems Event-based continuous-time signal acquisition and DSP Statistical event-based signal processing in distributed detection and estimation Asynchronous spike event coding technique with address event representation Event-based processing of non-stationary signals Event-based digital (FIR and IIR) filters Event-based local bandwidth estimation and signal reconstruction Event-Based Control and Signal Processing is the first extensive study on both event-based control and event-based signal processing, presenting scientific contributions at the cutting edge of modern science and engineering.

Download or read book Event Triggered Sliding Mode Control written by Bijnan Bandyopadhyay and published by Springer. This book was released on 2018-02-20 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph provides a comprehensive and in-depth analysis of sliding mode control, focusing on event-triggered implementation. The technique allows to prefix the steady-state bounds of the system, and this is independent of any boundary disturbances. The idea of event-triggered SMC is developed for both single input / single output and multi-input / multi-output linear systems. Moreover, the reader learns how to apply this method to nonlinear systems. The book primarily addresses research experts in the field of sliding mode control, but the book may also be beneficial for graduate students.

Download or read book Event Triggered Transmission Protocol in Robust Control Systems written by Niladri Sekhar Tripathy and published by CRC Press. This book was released on 2022-07-18 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling uncertain networked control system (NCS) with limited communication among subcomponents is a challenging task and event-based sampling helps resolve the issue. This book considers event-triggered scheme as a transmission protocol to negotiate information exchange in resilient control for NCS via a robust control algorithm to regulate the closed loop behavior of NCS in the presence of mismatched uncertainty with limited feedback information. It includes robust control algorithm for linear and nonlinear systems with verification. Features: Describes optimal control based robust control law for event-triggered systems. States results in terms of Theorems and Lemmas supported with detailed proofs. Presents the combination of network interconnected systems and robust control strategy. Includes algorithmic steps for precise understanding of the control technique. Covers detailed problem statement and proposed solutions along with numerical examples. This book aims at Senior undergraduate, Graduate students, and Researchers in Control Engineering, Robotics and Signal Processing.

Download or read book Event Triggered and Time Triggered Control Paradigms written by Roman Obermaisser and published by Springer Science & Business Media. This book was released on 2006-01-27 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Event-Triggered and Time-Triggered Control Paradigms presents a valuable survey about existing architectures for safety-critical applications and discusses the issues that must be considered when moving from a federated to an integrated architecture. The book focuses on one key topic - the amalgamation of the event-triggered and the time-triggered control paradigm into a coherent integrated architecture. The architecture provides for the integration of independent distributed application subsystems by introducing multi-criticality nodes and virtual networks of known temporal properties. The feasibility and the tangible advantages of this new architecture are demonstrated with practical examples taken from the automotive industry. Event-Triggered and Time-Triggered Control Paradigms offers significant insights into the architecture and design of integrated embedded systems, both at the conceptual and at the practical level.

Download or read book Event triggered Control for Linear Systems with Performance and Rate Guarantees written by B. A. Khashooei and published by . This book was released on 2017 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Networked Control Systems written by Alberto Bemporad and published by Springer Science & Business Media. This book was released on 2010-10-14 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book nds its origin in the WIDE PhD School on Networked Control Systems, which we organized in July 2009 in Siena, Italy. Having gathered experts on all the aspects of networked control systems, it was a small step to go from the summer school to the book, certainly given the enthusiasm of the lecturers at the school. We felt that a book collecting overviewson the important developmentsand open pr- lems in the eld of networked control systems could stimulate and support future research in this appealing area. Given the tremendouscurrentinterests in distributed control exploiting wired and wireless communication networks, the time seemed to be right for the book that lies now in front of you. The goal of the book is to set out the core techniques and tools that are ava- able for the modeling, analysis and design of networked control systems. Roughly speaking, the book consists of three parts. The rst part presents architectures for distributed control systems and models of wired and wireless communication n- works. In particular, in the rst chapter important technological and architectural aspects on distributed control systems are discussed. The second chapter provides insight in the behavior of communication channels in terms of delays, packet loss and information constraints leading to suitable modeling paradigms for commu- cation networks.

Download or read book Analysis and Design of Nonlinear Control Systems written by Alessandro Astolfi and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a tribute to Prof. Alberto Isidori on the occasion of his 65th birthday. Prof. Isidori’s proli?c, pioneering and high-impact research activity has spanned over 35 years. Throughout his career, Prof. Isidori has developed ground-breaking results, has initiated researchdirections and has contributed towardsthe foundationofnonlinear controltheory.In addition,his dedication to explain intricate issues and di?cult concepts in a simple and rigorous way and to motivate young researchers has been instrumental to the intellectual growth of the nonlinear control community worldwide. The volume collects 27 contributions written by a total of 52 researchers. The principal author of each contribution has been selected among the - searchers who have worked with Prof. Isidori, have in?uenced his research activity, or have had the privilege and honour of being his PhD students. The contributions address a signi?cant number of control topics, including th- retical issues, advanced applications, emerging control directions and tutorial works. The diversity of the areas covered, the number of contributors and their international standing provide evidence of the impact of Prof. Isidori in the control and systems theory communities. The book has been divided into six parts: System Analysis, Optimization Methods, Feedback Design, Regulation, Geometric Methods and Asymptotic Analysis, re?ecting important control areas which have been strongly in- enced and, in some cases, pioneered by Prof. Isidori.

Download or read book Optimal Control of Switched Systems with Application to Networked Embedded Control Systems written by Daniel Görges and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis addresses optimal control of discrete-time switched linear systems with application to networked embedded control systems (NECSs). Part I focuses on optimal control and scheduling of discrete-time switched linear systems. The objective is to simultaneously design a control law and a switching (scheduling) law such that a cost function is minimized. This optimization problem exhibits exponential complexity. Taming the complexity is a major challenge. Two novel methods are presented to approach this optimization problem: Receding-horizon control and scheduling relies on the receding horizon principle. The optimization problem is solved based on relaxed dynamic programming, allowing to reduce complexity by relaxing optimality within predefined bounds. The solution can be expressed as a piecewise linear (PWL) state feedback control law. Stability is addressed via an a priori stability condition based on a terminal weighting matrix and several a posteriori stability criteria based on constructing piecewise quadratic Lyapunov functions and on utilizing the cost function as a candidate Lyapunov function. Moreover, a region-reachability criterion is derived. Periodic control and scheduling relies on periodic control theory. Both offline and online scheduling are studied. The optimization problem is solved based on periodic control and exhaustive search. The online scheduling solution can again be expressed as a PWL state feedback control law. Stability is guaranteed inherently. Several methods are proposed to reduce the online complexity based on relaxation and heuristics. Part II focuses on optimal control and scheduling of NECSs. The NECS is modeled as a block-diagonal discrete-time switched linear system. Various control and scheduling codesign strategies are derived based on the methods from Part I regarding the structural properties of NECSs. The methods presented in Part I and II are finally evaluated in a case study.

Download or read book Optimal Event Triggered Control Using Adaptive Dynamic Programming written by Sarangapani Jagannathan and published by CRC Press. This book was released on 2024-06-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Event-triggered Control using Adaptive Dynamic Programming discusses event triggered controller design which includes optimal control and event sampling design for linear and nonlinear dynamic systems including networked control systems (NCS) when the system dynamics are both known and uncertain. The NCS are a first step to realize cyber-physical systems (CPS) or industry 4.0 vision. The authors apply several powerful modern control techniques to the design of event-triggered controllers and derive event-trigger condition and demonstrate closed-loop stability. Detailed derivations, rigorous stability proofs, computer simulation examples, and downloadable MATLAB® codes are included for each case. The book begins by providing background on linear and nonlinear systems, NCS, networked imperfections, distributed systems, adaptive dynamic programming and optimal control, stability theory, and optimal adaptive event-triggered controller design in continuous-time and discrete-time for linear, nonlinear and distributed systems. It lays the foundation for reinforcement learning-based optimal adaptive controller use for infinite horizons. The text then: Introduces event triggered control of linear and nonlinear systems, describing the design of adaptive controllers for them Presents neural network-based optimal adaptive control and game theoretic formulation of linear and nonlinear systems enclosed by a communication network Addresses the stochastic optimal control of linear and nonlinear NCS by using neuro dynamic programming Explores optimal adaptive design for nonlinear two-player zero-sum games under communication constraints to solve optimal policy and event trigger condition Treats an event-sampled distributed linear and nonlinear systems to minimize transmission of state and control signals within the feedback loop via the communication network Covers several examples along the way and provides applications of event triggered control of robot manipulators, UAV and distributed joint optimal network scheduling and control design for wireless NCS/CPS in order to realize industry 4.0 vision An ideal textbook for senior undergraduate students, graduate students, university researchers, and practicing engineers, Optimal Event Triggered Control Design using Adaptive Dynamic Programming instills a solid understanding of neural network-based optimal controllers under event-sampling and how to build them so as to attain CPS or Industry 4.0 vision.

Download or read book Event Triggered Transmission Protocol in Robust Control Systems written by Niladri Sekhar Tripathy and published by CRC Press. This book was released on 2022-07-18 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling uncertain networked control system (NCS) with limited communication among subcomponents is a challenging task and event-based sampling helps resolve the issue. This book considers event-triggered scheme as a transmission protocol to negotiate information exchange in resilient control for NCS via a robust control algorithm to regulate the closed loop behavior of NCS in the presence of mismatched uncertainty with limited feedback information. It includes robust control algorithm for linear and nonlinear systems with verification. Features: Describes optimal control based robust control law for event-triggered systems. States results in terms of Theorems and Lemmas supported with detailed proofs. Presents the combination of network interconnected systems and robust control strategy. Includes algorithmic steps for precise understanding of the control technique. Covers detailed problem statement and proposed solutions along with numerical examples. This book aims at Senior undergraduate, Graduate students, and Researchers in Control Engineering, Robotics and Signal Processing.

Download or read book Dynamic Systems with Time Delays Stability and Control written by Ju H. Park and published by Springer Nature. This book was released on 2019-08-29 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents up-to-date research developments and novel methodologies to solve various stability and control problems of dynamic systems with time delays. First, it provides the new introduction of integral and summation inequalities for stability analysis of nominal time-delay systems in continuous and discrete time domain, and presents corresponding stability conditions for the nominal system and an applicable nonlinear system. Next, it investigates several control problems for dynamic systems with delays including H(infinity) control problem Event-triggered control problems; Dynamic output feedback control problems; Reliable sampled-data control problems. Finally, some application topics covering filtering, state estimation, and synchronization are considered. The book will be a valuable resource and guide for graduate students, scientists, and engineers in the system sciences and control communities.

Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--

Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.