Download or read book Evaluation of Ti 48al 2cr 2nb Under Fretting Conditions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-10-03 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fretting behavior of Ti-48Al-2Cr-2Nb (y-TiAl) in contact with the nickel-base superalloy 718 was examined in air at temperatures from 296 to 823 K (23 to 550 C). The interfacial adhesive bonds between Ti-48Al-2Cr-2Nb and superalloy 718 were generally stronger than the cohesive bonds within Ti-48Al-2Cr-2Nb. The failed Ti-48Al-2Cr-2Nb debris subsequently transferred to the superalloy 718. In reference experiments conducted with Ti-6Al-4V against superalloy 718 under identical fretting conditions, the degree of transfer was greater for Ti-6A1-4V than for Ti-48Al-2Cr-2Nb. Wear of Ti-48Al-2Cr-2Nb generally decreased with increasing fretting frequency. The increasing rate of oxidation at elevated temperatures led to a drop in wear at 473 K. However, fretting wear increased as the temperature was increased from 473 to 823 K. At 723 and 823 K, oxide film disruption generated cracks, loose wear debris, and pits on the Ti-48Al-2Cr-2Nb wear surface. Both increasing slip amplitude and increasing load tended to produce more metallic wear debris, causing severe abrasive wear in the contacting metals. Miyoshi, Kazuhisa and Lerch, Bradley A. and Draper, Susan L. and Raj, Sai V. Glenn Research Center NASA/TM-2001-211205, NAS 1.15:211205, ASTM-STP-1425, E-13006-1

Download or read book Evaluation of Ti 48Al 2Cr 2Nb Under Fretting Conditions written by and published by . This book was released on 2001 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fretting Fatigue written by Steven E. Kinyon and published by ASTM International. This book was released on 2003 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 29 contributions drawn from the Third International Symposium on Fretting Fatigue held in Nagaoka, Japan in May 2001. Sections of the volume address fretting wear and crack initiation; fretting fatigue crack and damage; life prediction; fretting fatigue parameter effects; loading condition

Download or read book Research Technology 2001 written by and published by DIANE Publishing. This book was released on with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Research and Technology 2001 written by and published by . This book was released on 2002 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Durability Assessment of Gamma Tial written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-15 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gamma TiAl was evaluated as a candidate alloy for low-pressure turbine blades in aeroengines. The durability of g-TiAl was studied by examining the effects of impact or fretting on its fatigue strength. Cast-to-size Ti-48Al-2Cr-2Nb was studied in impact testing with different size projectiles at various impact energies as the reference alloy and subsequently fatigue tested. Impacting degraded the residual fatigue life. However, under the ballistic impact conditions studied, it was concluded that the impacts expected in an aeroengine would not result in catastrophic damage, nor would the damage be severe enough to result in a fatigue failure under the anticipated design loads. In addition, other gamma alloys were investigated including another cast-to-size alloy, several cast and machined specimens, and a forged alloy. Within this Ti-48-2-2 family of alloys aluminum content was also varied. The cracking patterns as a result of impacting were documented and correlated with impact variables. The cracking type and severity was reasonably predicted using finite element models. Mean stress affects were also studied on impact-damaged fatigue samples. The fatigue strength was accurately predicted based on the flaw size using a threshold-based, fracture mechanics approach. To study the effects of wear due to potential applications in a blade-disk dovetail arrangement, the machined Ti-47-2-2 alloy was fretted against In-718 using pin-on-disk experiments. Wear mechanisms were documented and compared to those of Ti-6Al-4V. A few fatigue samples were also fretted and subsequently fatigue tested. It was found that under the conditions studied, the fretting was not severe enough to affect the fatigue strength of g-TiAl. Draper, Susan L. and Lerch, Bradley A. and Pereira, J. Michael and Miyoshi, Kazuhisa and Arya, Vinod K. and Zhuang, Wyman Glenn Research Center WBS 22-708-24-06

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Advanced Materials written by and published by . This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government reports annual index written by and published by . This book was released on 199? with total page 1362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties. Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications. With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft

Download or read book Metals Abstracts written by and published by . This book was released on 1993 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.

Download or read book Residual Stress written by Ismail C. Noyan and published by Springer. This book was released on 2013-03-07 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Aerospace Materials written by Adrian P Mouritz and published by Elsevier. This book was released on 2012-05-23 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft, and an understanding of the wide range of materials used and the issues surrounding them is essential for the student of aerospace engineering.Introduction to aerospace materials reviews the main structural and engine materials used in aircraft, helicopters and spacecraft in terms of their production, properties, performance and applications. The first three chapters of the book introduce the reader to the range of aerospace materials, focusing on recent developments and requirements. Following these introductory chapters, the book moves on to discuss the properties and production of metals for aerospace structures, including chapters covering strengthening of metal alloys, mechanical testing, and casting, processing and machining of aerospace metals. The next ten chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys, as well as the properties and processing of polymers, composites and wood. Chapters on performance issues such as fracture, fatigue and corrosion precede a chapter focusing on inspection and structural health monitoring of aerospace materials. Disposal/recycling and materials selection are covered in the final two chapters. With its comprehensive coverage of the main issues surrounding structural aerospace materials,Introduction to aerospace materials is essential reading for undergraduate students studying aerospace and aeronautical engineering. It will also be a valuable resource for postgraduate students and practising aerospace engineers. Reviews the main structural and engine materials used in aircraft, helicopters and space craft in terms of their properties, performance and applications Introduces the reader to the range of aerospace materials, focusing on recent developments and requirements, and discusses the properties and production of metals for aerospace structures Chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys

Download or read book Tribological Applications of Composite Materials written by Mohamed Thariq Hameed Sultan and published by Springer Nature. This book was released on 2020-12-14 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the current advances and practices in tribological applications of composite materials under various processes, presenting the development, characterization, and morphological properties of composite materials in tribological applications. It covers a wide range of subjects, extending from fundamental research on the tribological characteristics of various multi-phase materials to the final applications of composites in wear loaded, technical components. It brings together contributions from researchers who discusses innovative experimental approaches and analytical techniques, creating a reference with comprehensive coverage of modern research techniques and the potential application of tribological composites in biomedical, aerospace, automotive, marines and construction industries. This volume will be of interest to material science researchers working in both industry and academia

Download or read book Tribocorrosion of Passive Metals and Coatings written by D Landolt and published by Elsevier. This book was released on 2011-10-12 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribocorrosion causes the degradation or alteration of materials through the combined action of corrosion and wear. It limits the performance and life-time of installations, machines and devices with moving parts, and controls certain manufacturing processes such as chemical–mechanical polishing. The effects of tribocorrosion are most pronounced on passive metals which owe their corrosion resistance to a thin protecting oxide film. Most corrosion-resistant engineering alloys belong to this category.This book provides an introduction to the developing field of tribocorrosion and an overview of the latest research. Part one reviews basic notions of corrosion and tribology, before presenting the most recent results on the growth and structure of passive oxide films. Tribocorrosion mechanisms under fretting, sliding and erosion conditions, respectively, are then discussed. Part two focuses on methods for measuring and preventing tribocorrosion. It includes chapters on electrochemical techniques, the design of tribocorrosion test equipment, data evaluation and the optimisation of materials’ properties for tribocorrosion systems. Part three presents a selection of tribocorrosion problems in engineering and medicine. Three chapters address the tribocorrosion of medical implants including test methods and clinical implications. Other chapters examine tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits, elevated-temperature metal working and chemical–mechanical polishing.With its distinguished editors and international team of expert contributors Tribocorrosion of passive metals and coatings is an invaluable reference tool for engineers and researchers in industry and academia confronted with tribocorrosion problems. Comprehensively reviews current research on the tribocorrosion of passive metals and coatings, with particular reference to the design of tribocorrosion test equipment, data evaluation and the optimisation of materials’ properties for tribocorrosion systems Chapters discuss tribocorrosion mechanisms under fretting, sliding and erosion conditions before focussing on methods for measuring and preventing tribocorrosion Includes a comprehensive selection of tribocorrosion problems in engineering and medicine, such as the tribocorrosion of medical implants, and tribocorrosion issues in nuclear power plants, marine environments, automotive cooling circuits and elevated-temperature metal working