Download or read book Evaluation of Thermophysical Properties Friction Factor and Heat Transfer of Alumina Nanofluid Flow in Tubes written by Sanjib Tiwari and published by . This book was released on 2013 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofluids for Heat Exchangers written by Hafiz Muhammad Ali and published by Springer Nature. This book was released on 2022-08-31 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the importance of heat transfer in heat exchangers, and fluids properties play a vital role to increase heat transfer rate translating the size of the equipment and cuts in the capital and running cost in the long term. Nanofluids applications in heat exchangers will help to improve the thermophysical properties of the fluid and therefore heat transfer. And, this book explains the enhancing mechanisms of heat transfer by employing nanofluids in heat exchangers. A critical discussion will enable to estimate the pros and cons of such fluids in different types of heat exchangers. Prevailing working conditions for short- and long-term implementation of various types of nanofluids will be discussed and introduced to the readers. This book helps the researchers, scientist and academicians working in the domain to be able to get a comprehensive knowledge at one place regarding the preparation, properties, measurements, data reduction, characteristics and applications of nanofluids in heat exchangers.
Download or read book Hybrid Nanofluids written by Zafar Said and published by Elsevier. This book was released on 2022-01-28 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids: Preparation, Characterization and Applications presents the history of hybrid nanofluids, preparation techniques, thermoelectrical properties, rheological behaviors, optical properties, theoretical modeling and correlations, and the effect of all these factors on potential applications, such as solar energy, electronics cooling, heat exchangers, machining, and refrigeration. Future challenges and future work scope have also been included. The information from this book enables readers to discover novel techniques, resolve existing research limitations, and create novel hybrid nanofluids which can be implemented for heat transfer applications. Describes the characterization, thermophysical and electrical properties of nanofluids Assesses parameter selection and property measurement techniques for the calibration of thermal performance Provides information on theoretical models and correlations for predicting hybrid nanofluids properties from experimental properties
Download or read book Heat Transfer Enhancement with Nanofluids written by Vincenzo Bianco and published by CRC Press. This book was released on 2015-04-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from
Download or read book Thermal Characteristics and Convection in Nanofluids written by Aditya Kumar and published by Springer Nature. This book was released on 2021-01-04 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers synthesis, characterization, stability, heat transfer and applications of nanofluids. It includes different types of nanofluids, their preparation methods as well as its effects on the stability and thermophysical properties of nanofluids. It provides a discussion on the mechanism behind the change in the thermal properties of nanofluids and heat transfer behaviour. It presents the latest information and discussion on the preparation and advanced characterization of nanofluids. It also consists of stability analysis of nanofluids and discussion on why it is essential for the industrial application. The book provides a discussion on thermal boundary layer properties in convection. Future directions for heat transfer applications to make the production and application of nanofluids at industrial level are also discussed.
Download or read book Viscous Fluid Flow written by Frank M. White and published by . This book was released on 1991 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for higher level courses in viscous fluid flow, this text presents a comprehensive treatment of the subject. This revision retains the approach and organization for which the first edition has been highly regarded, while bringing the material completely up-to-date. It contains new information on the latest technological advances and includes many more applications, thoroughly updated problems and exercises.
Download or read book Hybrid Nanofluids for Convection Heat Transfer written by Hafiz Muhammad Ali and published by Academic Press. This book was released on 2020-05-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids for Convection Heat Transfer discusses how to maximize heat transfer rates with the addition of nanoparticles into conventional heat transfer fluids. The book addresses definitions, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors, and core applications with implementation challenges of hybrid nanofluids. The work adopts mathematical models and schematic diagrams in review of available experimental methods. It enables readers to create new techniques, resolve existing research problems, and ultimately to implement hybrid nanofluids in convection heat transfer applications. Provides key heat transfer performance and thermophysical characteristics of hybrid nanofluids Reviews parameter selection and property measurement techniques for thermal performance calibration Explores the use of predictive mathematical techniques for experimental properties
Download or read book Nanofluidics written by Efstathios E. (Stathis) Michaelides and published by Springer. This book was released on 2014-05-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive examination of the subject of heat and mass transfer with nanofluids as well as a critical review of the past and recent research projects in this area. Emphasis is placed on the fundamentals of the transport processes using particle-fluid suspensions, such as nanofluids. The nanofluid research is examined and presented in a holistic way using a great deal of our experience with the subjects of continuum mechanics, statistical thermodynamics, and non-equilibrium thermodynamics of transport processes. Using a thorough database, the experimental, analytical, and numerical advances of recent research in nanofluids are critically examined and connected to past research with medium and fine particles as well as to functional engineering systems. Promising applications and technological issues of heat/mass transfer system design with nanofluids are also discussed. This book also: Provides a deep scientific analysis of nanofluids using classical thermodynamics and statistical thermodynamics to explain and interpret experimental observations Presents the theory and experimental results for both thermodynamic and transport properties Examines all transport properties and transport processes as well as their relationships through the pertinent macroscopic coefficients Combines recent knowledge pertaining to nanofluids with the previous fifty years of research on particulate flows, including research on transient flow and heat transfer of particulate suspensions Conducts an holistic examination of the material from more than 500 archival publications
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book Heat Transfer Due to Laminar Natural Convection of Nanofluids written by De-Yi Shang and published by Springer. This book was released on 2018-07-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical study of heat transfer due to laminar natural convection of nanofluids, using Al2O3-water nanofluid as an example. An innovative method of similarity transformation of velocity fields on laminar boundary layers is applied for the development of a mathematical governing model of natural convection with actual nanofluids, and a novel model of the nanofluid's variable thermophysical properties is derived by a mathematical analysis based on the developed model of variable physical properties of fluids combined with the model of the nanofluid's thermal conductivity and viscosity. Based on these, the physical property factors of nanofluids are produced, which leads to a simultaneous solution for deep investigations of hydrodynamics and heat transfer of nanofluid's natural convection. The book also proposes novel predictive formulae for the evaluation of heat transfer of Al2O3-water nanofluid’s natural convection. The formulae have reliable theoretical and practical value because they are developed by rigorous theoretical analysis of heat transfer combined with full consideration of the effects of the temperature-dependent physical properties of nanofluids and the nanoparticle shape factor and concentration, as well as variations of fluid boundary temperatures. The conversion factors proposed help to turn the heat transfer coefficient and rate of fluid natural convection into those of nanofluid natural convection. Furthermore, several calculation examples are provided to demonstrate the heat transfer application of the proposed predictive formulae.
Download or read book Nanofluid Heat and Mass Transfer in Engineering Problems written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2017-03-15 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, nanofluid heat and mass transfer in engineering problems are investigated. The use of additives in the base fluid like water or ethylene glycol is one of the techniques applied to augment heat transfer. Newly, innovative nanometer-sized particles have been dispersed in the base fluid in heat transfer fluids. The fluids containing the solid nanometer-sized particle dispersion are called "nanofluids." At first, nanofluid heat and mass transfer over a stretching sheet are provided with various boundary conditions. Problems faced for simulating nanofluids are reported. Also, thermophysical properties of various nanofluids are presented. Nanofluid flow and heat transfer in the presence of magnetic field are investigated. Furthermore, applications for electrical and biomedical engineering are provided. Besides, applications of nanofluid in internal combustion engine are provided.
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Evaluation of Alumina Nanofluids and Surfactant Drag Reducing Solutions to Improve Heat Transfer for Aircraft Cooling Systems written by Javier Artemio Narvaez Bazan and published by . This book was released on 2018 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a critical need for improved coolants for military aircraft applications. Research in this area has focused on either synthesizing novel coolants with improved thermal properties or developing additives for current coolants that can improve heat transfer capability in recirculating systems. This dissertation focuses on the latter alternative investigating the effect of nanoparticles or drag-reducing surfactant additives on effective heat transfer coefficients. Nanoparticles are reported to not only enhance thermal conductivity of coolants, but also increase the heat transfer coefficient. Some setbacks related to the use of nanofluids have been identified, such as increased pressure loss, erosion, and fluid instability. Surfactant drag-reducing additives greatly reduce skin friction, thereby reducing resistance to flow in tubes. Lower flow resistance means that the volumetric flow rate can be greatly increased at constant pumping power. Under these circumstances, the heat transfer coefficient can be enhanced. However, researchers have found that the heat transfer coefficient in tube heat exchangers is reduced by the addition of drag-reducing additives. Moreover, the percentage of heat transfer reduction in tube heat exchangers is greater than the corresponding drag reduction. The reason for the loss of heat transfer is that surfactant drag reducers lower flow resistance by damping turbulent eddies, which are known to drive heat transfer. Several researchers have tried to overcome heat transfer reduction in heat exchangers by different means described in this dissertation. However, despite their efforts, the improvements they achieved were not enough to eliminate the heat transfer reduction. Instead of focusing on turbulence, this dissertation explored the impact of increased heat transfer area per volume within microchannel devices, as the flow regime is typically laminar. The objective of this dissertation is to evaluate two approaches for heat transfer enhancement by additives--nanoparticles and surfactants--in aircraft cooling systems. For proof-of-concept experiments carried out in this work, the base fluid selected was DI water. A computational fluid dynamics study on the pressure, velocity, and temperature profiles was performed to analyze the flow and temperature patterns inside a cold plate, the microcooling device used in this research. A small study on the flow inside an elbow was also performed to analyze secondary flows. Alumina/DI water nanofluids were evaluated at system level. It was observed that, at the same volumetric flow, there was no significant improvement in convective heat transfer coefficients. Problems such as increase of pressure loss, particle settling, and especially vaporization were observed. Next, an aqueous surfactant solution was also tested within the heat exchanger system. A small reduction in both pressure loss and heat transfer coefficient at the system level was found. The relatively high pressure loss was due to the large ratio of form friction to total friction. Other problems associated with the use of surfactants as a heat transfer enhancer were surfactant poisoning and chemical degradation. Finally, alternatives to improve heat transfer coefficient by nanoparticles and surfactant additives are proposed, based on the analysis identified by this study.
Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.
Download or read book Munson s Fluid Mechanics written by Philip M. Gerhart and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Munson's FLUID MECHANICS Munson's Fluid Mechanics, offers comprehensive topical coverage, with varied examples and problems, application of visual component of fluid mechanics, and strong focus on effective learning. The text enables the gradual development of confidence in problem solving. Each important concept is introduced in easy-to-understand terms before more complicated examples are discussed.
Download or read book Nanofluids written by Sarit K. Das and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to nanofluids--their properties, synthesis, characterization, and applications Nanofluids are attracting a great deal of interest with their enormous potential to provide enhanced performance properties, particularly with respect to heat transfer. In response, this text takes you on a complete journey into the science and technology of nanofluids. The authors cover both the chemical and physical methods for synthesizing nanofluids, explaining the techniques for creating a stable suspension of nanoparticles. You get an overview of the existing models and experimental techniques used in studying nanofluids, alongside discussions of the challenges and problems associated with some of these models. Next, the authors set forth and explain the heat transfer applications of nanofluids, including microelectronics, fuel cells, and hybrid-powered engines. You also get an introduction to possible future applications in large-scale cooling and biomedicine. This book is the work of leading pioneers in the field, one of whom holds the first U.S. patent for nanofluids. They have combined their own first-hand knowledge with a thorough review of theliterature. Among the key topics are: * Synthesis of nanofluids, including dispersion techniques and characterization methods * Thermal conductivity and thermo-physical properties * Theoretical models and experimental techniques * Heat transfer applications in microelectronics, fuel cells, and vehicle engines This text is written for researchers in any branch of science and technology, without any prerequisite.It therefore includes some basic information describing conduction, convection, and boiling of nanofluids for those readers who may not have adequate background in these areas. Regardless of your background, you'll learn to develop nanofluids not only as coolants, but also for a host ofnew applications on the horizon.
Download or read book Thermophysical Properties of Complex Materials written by Aamir Shahzad and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assists in the exchange of research and progress outcomes concerned with the latest issues in thermophysical properties (TPPs) of complex liquids research, development, and production. Topics cover the control of transport properties of metallic alloys, thermal analysis of complex plasmas and instabilities in plasma devices, thermophysical properties at nanolevel, theoretical background of viscosities of hydrocarbons at varying temperature and pressure ranges, molecular modeling, and experimental investigations based on nanofluids and ionic conduction in solid-state electrolytes for thermodynamic data. This book enables global researchers to tackle the challenges that continue to generate cost-effective TPPs and the latest understanding in the development of complex materials and the collaboration of modern thermophysical generating technologies. Moreover, it provides a platform for different regional authors to exchange scientific knowledge and generate enthusiasm for science and technology.
