Download or read book Evaluation of the Methods of Linear Least Squares Based on Linearized Models of the Completely Mixed Flow Activated Sludge Process for Estimating the Monod Kinetic Parameters and Alternative Methods for Estimating the Monod Kinetic Parameters written by Stanislas Kouakou Kouadio and published by . This book was released on 1984 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Download or read book Water Research written by and published by . This book was released on 1983 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.
Download or read book Uncertainty and Forecasting of Water Quality written by M.B. Beck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the International Institute for Applied Systems Analysis began its study of water quality modeling and management in 1977, it has been interested in the relations between uncertainty and the problems of model calibration and prediction. The work has focused on the theme of modeling poorly defined environmental systems, a principal topic of the effort devoted to environmental quality control and management. Accounting for the effects of uncertainty was also of central concern to our two case studies of lake eutrophication management, one dealing with Lake Balaton in Hungary and the other with several Austrian lake systems. Thus, in November 1979 we held a meeting at Laxenburg to discuss recent method ological developments in addressing problems associated with uncertainty and forecasting of water quality. This book is based on the proceedings of that meeting. The last few years have seen an increase in awareness of the issue of uncertainty in water quality and ecological modeling. This book is relevant not only to contemporary issues but also to those of the future. A lack of field data will not always be the dominant problem for water quality modeling and management; more sophisticated measuring techniques and more comprehensive monitoring networks will come to be more widely applied. Rather, the important problems of the future are much more likely to emerge from the enhanced facility of data processing and to concern the meaningful interpretation, assimilation., and use of the information thus obtained.
Download or read book On line Estimation and Adaptive Control of Bioreactors written by G. Bastin and published by Elsevier. This book was released on 2013-10-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with monitoring and control of biotechnological processes. Different methods are proposed which are based on the nonlinear structure of the process and do not require any a priori knowledge of the fermentation parameters. The theoretical stability and convergence properties of the proposed algorithms are analysed and their performances are illustrated by simulation results and, in many instances, by real life experiments. The concept of software sensors is introduced; these are algorithms based on the nonlinear model of the process and designed for on-line estimation of the biological variables and/or the fermentation parameters. In order to deal with process nonstationarities and parameter uncertainties, reference is made to adaptive estimation and control techniques.The book is the result of an intensive joint research effort by the authors during the last decade. It is intended as a graduate level text for students of bioengineering as well as a reference text for scientists and engineers involved in the design and optimization of bioprocesses.
Download or read book Biofilms in Wastewater Treatment written by Stefan Wuertz and published by IWA Publishing. This book was released on 2003-04-30 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of the book is the flow of information from experimental approaches in biofilm research to simulation and modeling of complex wastewater systems. Probably the greatest challenge in wastewater research lies in using the methods and the results obtained in one scientific discipline to design intelligent experiments in other disciplines, and eventually to improve the knowledge base the practitioner needs to run wastewater treatment plants. The purpose of Biofilms in Wastewater Treatment is to provide engineers with the knowledge needed to apply the new insights gained by researchers. The authors provide an authoritative insight into the function of biofilms on a technical and on a lab-scale, cover some of the exciting new basic microbiological and wastewater engineering research involving molecular biology techniques and microscopy, and discuss recent attempts to predict the development of biofilms. This book is divided into 3 sections: Modeling and Simulation; Architecture, Population Structure and Function; and From Fundamentals to Practical Application, which all start with a scientific question. Individual chapters attempt to answer the question and present different angles of looking at problems. In addition there is an extensive glossary to familiarize the non-expert with unfamiliar terminology used by microbiologists and computational scientists. The colour plate section of this book can be downloaded by clicking here. (PDF Format 1 MB)
Download or read book Advanced Instrumentation Data Interpretation and Control of Biotechnological Processes written by J.F. van Impe and published by Boom Koninklijke Uitgevers. This book was released on 1998 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written versions of all 14 lectures presented at the COMETT II course held in Gent, Belgium, in October 1994, presenting recent developments in the emerging field. The five lectures on hardware sensors discuss such matters as flow injection analysis for the on-line monitoring of a waste-water treatment plant, membrane inlet mass spectrometry for characterizing and monitoring biotechnological processes, and the micro-calorimetric characterization of bacterial inocula. The rest explore model based control from perspectives such as on-line data acquisition, error diagnosis and data reconciliation using linear conservation relations, bioprocess model identification, the monitoring and adaptive control of bioprocesses, and predictive control in biotechnology using fuzzy and neural models. No index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Rates Constants and Kinetics Formulations in Surface Water Quality Modeling written by Environmental Research Laboratory (Athens, Ga.) and published by . This book was released on 1978 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Benchmarking of Control Strategies for Wastewater Treatment Plants written by Krist V. Gernaey and published by IWA Publishing. This book was released on 2014-09-15 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada
Download or read book Activated Sludge written by Wesley Eckenfelder and published by CRC Press. This book was released on 1998-08-04 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Process Theory Kinetics and Sludge Quality Control: Activated Sludge Process - Process Theory - Activated Sludge Separation Problems - References Activated Sludge Treatment of Municipal Wastewater U.S.A. Practice: General Approach - Clarifier Design - Aeration Tank (Reactor) Design - Appurtenance Design - Configurations - ReferencesEurope
Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature
Download or read book Biohydrogen Production from Organic Wastes written by Jianlong Wang and published by Springer. This book was released on 2017-05-27 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively introduces fundamentals and applications of fermentative hydrogen production from organic wastes, consisting of eight chapters, covering the microbiology, biochemistry and enzymology of hydrogen production, the enrichment of hydrogen-producing microorganisms, the pretreatment of various organic wastes for hydrogen production, the influence of different physicochemical factors on hydrogen production, the kinetic models and simulation of biological process of fermentative hydrogen production, the optimization of biological hydrogen production process and the fermentative hydrogen production from sewage sludge. The book summarizes the most recent advances that have been made in this field and discusses bottlenecks of further development. This book gives a holistic picture of this technology and details the knowledge through illustrative diagrams, flow charts, and comprehensive tables. It is intended for undergraduate and graduate students who are interested in bioenergy and wastes management, researchers exploring microbial fermentation process, and engineers working on system optimization or other bioenergy applications.
Download or read book System Identification written by Karel J. Keesman and published by Springer Science & Business Media. This book was released on 2011-05-16 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Identification shows the student reader how to approach the system identification problem in a systematic fashion. The process is divided into three basic steps: experimental design and data collection; model structure selection and parameter estimation; and model validation, each of which is the subject of one or more parts of the text. Following an introduction on system theory, particularly in relation to model representation and model properties, the book contains four parts covering: • data-based identification – non-parametric methods for use when prior system knowledge is very limited; • time-invariant identification for systems with constant parameters; • time-varying systems identification, primarily with recursive estimation techniques; and • model validation methods. A fifth part, composed of appendices, covers the various aspects of the underlying mathematics needed to begin using the text. The book uses essentially semi-physical or gray-box modeling methods although data-based, transfer-function system descriptions are also introduced. The approach is problem-based rather than rigorously mathematical. The use of finite input–output data is demonstrated for frequency- and time-domain identification in static, dynamic, linear, nonlinear, time-invariant and time-varying systems. Simple examples are used to show readers how to perform and emulate the identification steps involved in various control design methods with more complex illustrations derived from real physical, chemical and biological applications being used to demonstrate the practical applicability of the methods described. End-of-chapter exercises (for which a downloadable instructors’ Solutions Manual is available from fill in URL here) will both help students to assimilate what they have learned and make the book suitable for self-tuition by practitioners looking to brush up on modern techniques. Graduate and final-year undergraduate students will find this text to be a practical and realistic course in system identification that can be used for assessing the processes of a variety of engineering disciplines. System Identification will help academic instructors teaching control-related to give their students a good understanding of identification methods that can be used in the real world without the encumbrance of undue mathematical detail.
Download or read book Numerical Techniques for Chemical and Biological Engineers Using MATLAB written by Said S.E.H. Elnashaie and published by Springer Science & Business Media. This book was released on 2007-03-12 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book presents numerical techniques needed for chemical and biological engineers using Matlab. The book begins by exploring general cases, and moves on to specific ones. The text includes a large number of detailed illustrations, exercises and industrial examples. The book provides detailed mathematics and engineering background in the appendixes, including an introduction to Matlab. The text will be useful to undergraduate students in chemical/biological engineering, and in applied mathematics and numerical analysis.
Download or read book Risk Assessment Methods written by V.T. Covello and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has already been written about risk assessment. Epidemiologists write books on how risk assessment is used to explore the factors that influence the distribution of disease in populations of people. Toxicologists write books on how risk assess ment involves exposing animals to risk agents and concluding from the results what risks people might experience if similarly exposed. Engineers write books on how risk assessment is utilized to estimate the risks of constructing a new facility such as a nuclear power plant. Statisticians write books on how risk assessment may be used to analyze mortality or accident data to determine risks. There are already many books on risk assessment-the trouble is that they all seem to be about different sUbjects! This book takes another approach. It brings together all the methods for assessing risk into a common framework, thus demonstrating how the various methods relate to one another. This produces four important benefits: • First, it provides a comprehensive reference for risk assessment. This one source offers readers concise explanations of the many methods currently available for describing and quantifying diverse types of risks. • Second, it consistently evaluates and compares available risk assessment methods and identifies their specific strengths and limitations. Understand ing the limitations of risk assessment methods is important. The field is still in its infancy, and the problems with available methods are disappoint ingly numerous. At the same time, risk assessment is being used.
