Download or read book Asphalt Paving Technology 2011 written by Eugene L. Skok and published by DEStech Publications, Inc. This book was released on 2011-06-28 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Highway Practice written by National Cooperative Highway Research Program and published by . This book was released on 1994 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uses of Recycled Rubber Tires in Highways written by Jon A. Epps and published by Transportation Research Board. This book was released on 1994 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis on the use of recycled rubber tires in highways will be of interest to administrators and policy-makers; pavement, materials, geotechnical, environmental, and traffic operations engineers; and research engineers involved with highway design and construction issues. Information is provided on the uses of rubber tires in asphalt paving materials as well as other uses, such as on fills and embankments, for erosion control and on railroad grade crossings. Specifically, information is included which identifies the agencies using or implementing applications for recycled rubber tires and defines the design parameters, technical and construction limitations, performance, costs, benefits, environmental limitations, specifications, and availability. This synthesis of information defines the use of recycled rubber tires in highways and is based on a review of nearly 500 references and on information recorded from state highway agency responses to a 1991 survey of practice. Updates are included for as much of the state practice information possible through 1993. The use of scrap tires for highway applications is dynamic with regard to policy and technical issues. Therefore, the reader should keep in mind that the information presented reflects the best available data at a particular time. The synthesis also identifies current research in the topic area, critical research needs, and legislative issues that affect application and use of recycled rubber tires.
Download or read book Crumb Rubber Modifier written by and published by . This book was released on 1993 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Section 1038 of the Intermodal Surface Transportation Efficiency Act of 1991 (ISTEA) contains provisions for each State to begin incorporating scrap tire rubber into their asphalt paving materials. A workshop was developed through the cooperation of highway agencies and the asphalt industry to discuss present procedures and practices for designing and constructing asphalt pavements which incorporate scrap tire rubber (crumb rubber modifier). These workshop notes were prepared from the proceedings of the 13 workshop sessions.
Download or read book Chip Seal Best Practices written by Douglas D. Gransberg and published by Transportation Research Board. This book was released on 2005 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 342: Chip Seal Best Practices examines ways to assist in the development and implementation of pavement preservation programs by identifying the benefits of using chip seal as part of a preventive maintenance program and by highlighting advanced chip seal programs in use around the world. The report includes approximately 40 best practices in the areas of chip seal design methods, contract administration, equipment practices, construction practices, and performance measures. According to the report, the increased use of chip seals for maintenance can be a successful, cost-effective way of using preventive maintenance to preserve both low-volume and higher-volume pavements.
Download or read book Advances in Asphalt Materials written by Shin-Che Huang and published by Woodhead Publishing. This book was released on 2015-04-08 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urgent need for infrastructure rehabilitation and maintenance has led to a rise in the levels of research into bituminous materials. Breakthroughs in sustainable and environmentally friendly bituminous materials are certain to have a significant impact on national economies and energy sustainability. This book will provide a comprehensive review on recent advances in research and technological developments in bituminous materials. Opening with an introductory chapter on asphalt materials and a section on the perspective of bituminous binder specifications, Part One covers the physiochemical characterisation and analysis of asphalt materials. Part Two reviews the range of distress (damage) mechanisms in asphalt materials, with chapters covering cracking, deformation, fatigue cracking and healing of asphalt mixtures, as well as moisture damage and the multiscale oxidative aging modelling approach for asphalt concrete. The final section of this book investigates alternative asphalt materials. Chapters within this section review such aspects as alternative binders for asphalt pavements such as bio binders and RAP, paving with asphalt emulsions and aggregate grading optimization. - Provides an insight into advances and techniques for bituminous materials - Comprehensively reviews the physicochemical characteristics of bituminous materials - Investigate asphalt materials on the nano-scale, including how RAP/RAS materials can be recycled and how asphalt materials can self-heal and rejuvenator selection
Download or read book Shell Bitumen Handbook written by Robert Hunter and published by ICE Publishing. This book was released on 2015-01-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shell has been at the forefront of bitumen technology for over 90 years, and continues to play a leading role in global bitumen research and development. The Shell Bitumen Handbook is an authoritative source of information on bitumen use in road pavements around the world.
Download or read book Environment Friendly Construction Materials written by Shaopeng Wu and published by MDPI. This book was released on 2019-06-20 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction materials are the most widely used materials for civil infrastructure in our daily lives. However, from an environmental point of view, they consume a huge amount of natural resources and generate the majority of greenhouse gasses. Therefore, many new and novel technologies for designing environmentally friendly construction materials have been developed recently. This Special Issue, “Environment-Friendly Construction Materials”, has been proposed and organized as a means to present recent developments in the field of construction materials. It covers a wide range of selected topics on construction materials.
Download or read book Guide for Pavement Friction written by and published by AASHTO. This book was released on 2008 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains guidelines and recommendations for managing and designing for friction on highway pavements. The contents of this report will be of interest to highway materials, construction, pavement management, safety, design, and research engineers, as well as others concerned with the friction and related surface characteristics of highway pavements.
Download or read book Asphalt Pavements written by Patrick Lavin and published by CRC Press. This book was released on 2003-09-02 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements provides the know-how behind the design, production and maintenance of asphalt pavements and parking lots. Incorporating the latest technology, this book is the first to focus primarily on the design, production and maintenance of low-volume roads and parking areas.Special attention is given to determining the traffic capacity, re
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Pavement Engineering written by Rajib B. Mallick and published by CRC Press. This book was released on 2017-10-16 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pavement Engineering will cover the entire range of pavement construction, from soil preparation to structural design and life-cycle costing and analysis. It will link the concepts of mix and structural design, while also placing emphasis on pavement evaluation and rehabilitation techniques. State-of-the-art content will introduce the latest concepts and techniques, including ground-penetrating radar and seismic testing. This new edition will be fully updated, and add a new chapter on systems approaches to pavement engineering, with an emphasis on sustainability, as well as all new downloadable models and simulations.
Download or read book Sustainable Civil Engineering Practices written by Varinder S. Kanwar and published by Springer Nature. This book was released on 2020-04-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Sustainable Civil Engineering Practices (ICSCEP 2019). It covers several important aspects of sustainable civil engineering practices dealing with effective waste and material management, natural resources, industrial products, energy, food, transportation and shelter, while conserving and protecting the environmental quality and the natural resource base essential for future development. The book also discusses engineering solutions to sustainable development and green design issues. Special emphasis is given on qualitative guidelines for generation, treatment, handling, transport, disposal and recycling of wastes. The book is intended as a practice-oriented reference guide for researchers and practitioners, and will be useful for all working in sustainable civil engineering related fields.
Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.
Download or read book AASHTO Maintenance Manual for Roadways and Bridges written by Kenneth A. Brewer and published by AASHTO. This book was released on 2007 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Congress on Polymers in Concrete ICPIC 2018 written by Mahmoud M. Reda Taha and published by Springer. This book was released on 2018-04-06 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the proceedings from the International Congress of Polymers in Concrete 2018 (ICPIC), held under the theme “Polymers for Resilient and Sustainable Concrete Infrastructure.” ICPIC 2018 provides an opportunity for researchers and specialists working in the fields of polymers to exchange ideas and follow the latest progress in the use of polymers in concrete infrastructure. It also showcases the use of polymers and polymer concrete in sustainable and resilient development, and provides a platform for local and overseas suppliers, developers, manufacturers and contractors using polymers, polymer concrete and polymer composites in concrete structures to develop new business opportunities and follow the latest developments in the field. The International Congress of Polymers in Concrete is an international forum that has taken place every three years for the last 40 years with the objective of following progress in the field of polymers and their use in concrete and construction. Following 15 successful congresses held in London (1975), Austin (1978), Koriyama (1981), Darmstadt (1984), Brighton (1987), Shanghai (1990), Moscow (1992), Oostende (1995), Bologna (1998), Honolulu (2001), Berlin (2004), Chuncheon (2007), Funchal (2010), Shanghai (2013) and Singapore (2015), the 16th ICPIC will take place in Washington, DC, from April 29 to May 1st, 2018.
Download or read book Asphalt Paving Technology written by Carl L. Monismith and published by McGraw-Hill Companies. This book was released on 1997-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on asphalt paving technology, this work emphasizes quality control and quality assurance programmes in producing high-quality pavements. It combines theory and practice of asphalt paving including developments and information from the recently completed Strategic Highway Research Program which was designed to improve asphalt specifications, mix design and analysis systems.
