Download or read book Handbook of Indoor Air Quality written by Yinping Zhang and published by Springer Nature. This book was released on 2022-11-23 with total page 2182 pages. Available in PDF, EPUB and Kindle. Book excerpt: People live in indoor environment about 90% of lifetime and an adult inhales about 15 kg air each day, over 75% of the human body’s daily mass intake (air, food, water). Therefore, indoor air quality (IAQ) is very important to human health. This book provides the basic knowledge of IAQ and highlights the research achievements in the past two decades. It covers the following 12 sections: introduction, indoor air chemicals, indoor air particles, measurement and evaluation, source/sink characteristics, indoor chemistry, human exposure to indoor pollutants, health effects and health risk assessment, IAQ and cognitive performance, standards and guidelines, IAQ control, and air quality in various indoor environments. It provides a combination of an introduction to various aspects on IAQ studies, the current state-of-knowledge, various advances and the perspective of IAQ studies. It will be very helpful for the researchers and technicians in the IAQ and the related fields. It is also useful for experts in other fields and general readers who want to obtain a basic understanding of and research advances in the field of IAQ. A group of experts in IAQ research have been recruited to write the chapters. Their research interests and experience cover the scope of the book. In addition, some experienced experts in IAQ field have been invited as advisors or reviewers to give their comments, suggestions and revisions on the handbook framework and the chapter details. Their contribution guarantees the quality of the book. We are very grateful to them. Last but not least, we express our heartfelt thanks to Prof. Spengler, Harvard University, for writing the foreword of the current Handbook of Indoor Air Quality both as a pioneer scientist who contributed greatly to indoor air science and as an Editor-in-chief of Handbook of Indoor Air Quality 2001, 1st ed. New York: McGraw-Hill. In addition to hard copies, the book is also published online and will be updated by the authors as needed to keep it aligned with current knowledge. These salient features can make the handbook fresh with the research development.

Download or read book Fire Toxicity written by A A Stec and published by Elsevier. This book was released on 2010-03-12 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Toxic fire effluents are responsible for the majority of fire deaths, and an increasing large majority of fire injuries, driven by the widespread and increasing use of synthetic polymers. Fire safety has focused on preventing ignition and reducing flame spread through reducing the rate of heat release, while neglecting the important issue of fire toxicity. This is the first reference work on fire toxicity and the only scientific publication on the subject in the last 15 years.Assessment of toxic effects of fires is increasingly being recognised as a key factor in the assessment of fire hazards. This book raises important issues including the types of toxic effluents that different fires produce, their physiological effects, methods for generation and assessment of fire toxicity, current and proposed regulations and approaches to modelling the toxic impact of fires.The contributors to Fire toxicity represent an international team of the leading experts in each aspect of this challenging and important field. This book provides an important reference work for professionals in the fire community, including fire fighters, fire investigators, regulators, fire safety engineers, and formulators of fire-safe materials. It will also prove invaluable to researchers in academia and industry. - Investigates the controversial subject of toxic effluents as the cause of the majority of fire deaths and injuries - Describes the different types of toxic effluents and the specific fires that they produce, their physiological effects and methods for generation - Provides an overview of national and international fire safety regulations including current and proposed regulations such as a standardized framework for prediction of fire gas toxicity

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book List of Bureau of Mines Publications and Articles with Subject and Author Index written by United States. Bureau of Mines and published by . This book was released on 1970 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MDI and TDI Safety Health and the Environment written by D. C. Allport and published by John Wiley & Sons. This book was released on 2003-05-07 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: MDI and TDI are polymer building blocks with a wide range of applications in industry. Both are used in large quantities and can be found in a wide variety of industries and applications. As their use will often involve large numbers of workers they are also subject to stringent health and safety regulations. This book covers all the important topics concerning MDI and TDI and provides comprehensive coverage on the health and environmental science associated with these. Considering the risk management of both substances this is the first book to offer comprehensive discussion of health and environmental issues and includes * insights from academic, regulatory, and industrial experts * numerous photographs, spectra, tables, and graphs * additional information on physical properties and analysis * Considers the risk management of these two diisocyanates Addressing their use throughout industry this title presents an essential source of information for occupational physicians, industrial hygiene professionals, polyurethane producers, environmental scientists, chemical analysts and regulators.

Download or read book Toxicity of Building Materials written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2012-08-13 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: From long-standing worries regarding the use of lead and asbestos to recent research into carcinogenic issues related to the use of plastics in construction, there is growing concern regarding the potential toxic effects of building materials on health. Toxicity of building materials provides an essential guide to this important problem and its solutions.Beginning with an overview of the material types and potential health hazards presented by building materials, the book goes on to consider key plastic materials. Materials responsible for formaldehyde and volatile organic compound emissions, as well as semi-volatile organic compounds, are then explored in depth, before a review of wood preservatives and mineral fibre-based building materials. Issues related to the use of radioactive materials and materials that release toxic fumes during burning are the focus of subsequent chapters, followed by discussion of the range of heavy metals, materials prone to mould growth, and antimicrobials. Finally, Toxicity of building materials concludes by considering the potential hazards posed by waste based/recycled building materials, and the toxicity of nanoparticles.With its distinguished editors and international team of expert contributors, Toxicity of building materials is an invaluable tool for all civil engineers, materials researchers, scientists and educators working in the field of building materials. - Provides an essential guide to the potential toxic effects of building materials on health - Comprehensively examines materials responsible for formaldehyde and volatile organic compound emissions, as well as semi-volatile organic compounds - Later chapters focus on issues surrounding the use of radioactive materials and materials that release toxic fumes during burning

Download or read book Diphenylmethane Diisocyanate MDI written by J. Sekizawa and published by . This book was released on 2001 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise assessment of the risks to human health and the environment posed by exposure to diphenylmethane diisocyanate (MDI), a product used in industrial settings in the production of polyurethane elastomers (rollers, packing rubber, vibration insulators, synthetic leather, etc.) spandex fibers, and rubber shoe soles. Polymeric MDI (PMDI), the primary commercial form of MDI, is used to make rigid and flexible foam, foundry resin, sand binders, and heat insulating material.

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Airliner Cabin Environment and the Health of Passengers and Crew written by National Research Council and published by National Academies Press. This book was released on 2002-02-03 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although poor air quality is probably not the hazard that is foremost in peoples' minds as they board planes, it has been a concern for years. Passengers have complained about dry eyes, sore throat, dizziness, headaches, and other symptoms. Flight attendants have repeatedly raised questions about the safety of the air that they breathe. The Airliner Cabin Environment and the Health of Passengers and Crew examines in detail the aircraft environmental control systems, the sources of chemical and biological contaminants in aircraft cabins, and the toxicity and health effects associated with these contaminants. The book provides some recommendations for potential approaches for improving cabin air quality and a surveillance and research program.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1996 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MouldMaking and Casting written by Nick Brooks and published by Crowood. This book was released on 2013-12-21 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mouldmaking and Casting is a technical manual of the many techniques of this ancient craft and art form. With step-by-step illustrations, it explains the materials required and the processes involved to create reproductions of a range of pieces. The book covers traditional techniques as well as today's more advanced technical methods.

Download or read book Toxicological Profile for Polycyclic Aromatic Hydrocarbons written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book The Inside Story written by and published by . This book was released on 1993 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Health Effects Assessment Summary Tables written by and published by . This book was released on 1997 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology written by M. H. Fulekar and published by I. K. International Pvt Ltd. This book was released on 2010 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the latest developments and advances in the field of nanoscience and nanotechnology and their applications in the design and development of material science and devices, energy, drug delivery, cosmetics, biology, biotechnology, tissue engineering, bioinformatics, information technology, agriculture and food, environmental protection, health risk, ethics, and regulations.