Download or read book Evaluation of Load Factor Design of Steel Highway Bridges written by Madan Mohan Gupta and published by . This book was released on 1975 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.
Download or read book Guide Specifications for Strength Evaluation of Existing Steel and Concrete Bridges 1989 written by American Association of State Highway and Transportation Officials. Subcommittee on Bridges and Structures and published by . This book was released on 1989 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Damage Analysis written by Burl Edward Dishongh and published by . This book was released on 1990 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety of Bridges written by Parag C. Das and published by Thomas Telford. This book was released on 1997 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses "the safety concepts which form the basis of modern bridge design and assessment codes" and "the background work carried out in the development of the new UK bridge and route-specific traffic loading requirements, and the proposed whole life performance-based assessment rules" -- Preface.
Download or read book The Manual for Bridge Evaluation written by American Association of State Highway and Transportation Officials. Subcommittee on Bridges and Structures and published by AASHTO. This book was released on 2011 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Rating Procedures for Steel Beam and Girder Bridges written by Theodore V. Galambos and published by Transportation Research Board. This book was released on 1993 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tentative Criteria for Load Factor Design of Steel Highway Bridges written by George Sylvester Vincent and published by . This book was released on 1969 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Design and Evaluation written by Gongkang Fu and published by John Wiley & Sons. This book was released on 2013-01-25 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A succinct, real-world approach to complete bridge system design and evaluation Load and Resistance Factor Design (LRFD) and Load and Resistance Factor Rating (LRFR) are design and evaluation methods that have replaced or offered alternatives to other traditional methods as the new standards for designing and load-rating U.S. highway bridges. Bridge Design and Evaluation covers complete bridge systems (substructure and superstructure) in one succinct, manageable package. It presents real-world bridge examples demonstrating both their design and evaluation using LRFD and LRFR. Designed for a 3- to 4-credit undergraduate or graduate-level course, it presents the fundamentals of the topic without expanding needlessly into advanced or specialized topics. Important features include: Exclusive focus on LRFD and LRFR Hundreds of photographs and figures of real bridges to connect the theoretical with the practical Design and evaluation examples from real bridges including actual bridge plans and drawings and design methodologies Numerous exercise problems Specific design for a 3- to 4-credit course at the undergraduate or graduate level The only bridge engineering textbook to cover the important topics of bridge evaluation and rating Bridge Design and Evaluation is the most up-to-date and inclusive introduction available for students in civil engineering specializing in structural and transportation engineering.
Download or read book Dynamic Impact Factors for Bridges written by David I. McLean and published by Transportation Research Board. This book was released on 1998 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state department of transportation and consulting bridge, structural, and research engineers. The synthesis describes the current state of the practice for determining dynamic impact factors for bridges. Information for the synthesis was collected by surveying U.S. and Canadian transportation agencies and by conducting a literature search using domestic and foreign sources. This report of the Transportation Research Board documents relevant background and recent information with regard to vehicular dynamic load effects on bridges. It provides details on the basic concepts of bridge dynamics, including identification of the main variables affecting bridge dynamic response. In addition, current code provisions for accounting for vehicular dynamic load effects for new bridge design and load evaluation of existing bridges are reported, including a discussion on the background of the provisions. Finally, a discussion of observed field problems associated with vehicular dynamic load effects, as obtained from the survey, are included.
Download or read book Fatigue Evaluation of Steel Bridges written by Mark Douglas Bowman and published by Transportation Research Board. This book was released on 2012 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Report 721: Fatigue Evaluation of Steel Bridges provides proposed revisions to Section 7--Fatigue Evaluation of Steel Bridges of the American Association of State Highway and Transportation Officials Manual for Bridge Evaluation with detailed examples of the application of the proposed revisions."--Publisher's description.
Download or read book AASHTO Load and Resistance Factor Design Movable Highway Bridge Design Specifications written by American Association of State Highway and Transportation Officials. Subcommittee on Bridges and Structures and published by AASHTO. This book was released on 2007 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Evaluation and Analysis written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1973 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simplified LRFD Bridge Design written by Jai B. Kim and published by CRC Press. This book was released on 2013-04-08 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helping readers prepare for the civil and structural PE exam, this book presents numerous design examples that serve as a comprehensive, step-by-step guide to basic bridge design using the AASHTO LRFD Bridge Design Specifications, Fifth Edition. It offers a simplified explanation of load resistance factor design (LRFD) method-based bridge design principles and lists the AASHTO reference section numbers alongside formulas and where topics are introduced, to refer the reader to the primary source material. This is a valuable reference for civil engineering students as well as for practicing engineers.
Download or read book Load Factor Design Recommendations for Steel I Beam Composite Highway Bridges written by Conrad P. Heins and published by . This book was released on 1976 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Design Assessment and Monitoring written by Airong Chen and published by Routledge. This book was released on 2018-12-07 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges play important role in modern infrastructural system. This book provides an up-to-date overview of the field of bridge engineering, as well as the recent significant contributions to the process of making rational decisions in bridge design, assessment and monitoring and resources optimization deployment for the purpose of enhancing the welfare of society. Tang specifies the purposes and requirements of the conceptual bridge design, considering bridge types, basic elements, structural systems and load conditions. Cremona and Poulin propose an assessment procedure for existing bridges. Kallias et al. develop a framework for the performance assessment of metallic bridges under atmospheric exposure by integrating coating deterioration and corrosion modelling. Soriano et al. employ a simplified approach to estimate the maximum traffic load effect on a highway bridge and compare the results with other approaches based on on-site weigh-in-motion data. Akiyama et al. propose a method for reliability-based durability design and service life assessment of reinforced concrete deck slab of jetty structures. Chen et al. propose a meso-scale model to simulate the uniform and pitting corrosion of rebar in concrete and to obtain the crack patterns of the concrete with different rebar arrangements. Ruan et al. present a traffic load model for long span multi-pylon cable- stayed bridges. Khuc and Catbas implement a non-target vision- based method for the measurement of both static and dynamic displacements time histories. Finally, Cruz presents the career of the outstanding bridge engineer Edgar Cardoso in the fields of bridge design and experimental analysis. The book serves as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers, engineers, consultants and contractors from all areas sections of bridge engineering. The chapters originally published as a special issue in Structure and Infrastructure Engineering.
Download or read book Methods for Increasing Live Load Capacity of Existing Highway Bridges written by Roger A. Dorton and published by Transportation Research Board. This book was released on 1997 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This synthesis will be of interest to state department of transportation bridge design and structural engineers, bridge consultants, and others involved in applied and research methods for increasing the live load capacity of existing highway bridges. The synthesis describes the current state of the practice for the various methods used to increase the live load capacity of existing highway bridges. This is done predominantly for bridges in the short- to medium-span range. Information on the more common bridge material types is presented. There is an emphasis on superstructure rather than substructure strengthening.
