Download or read book Evaluation of Harvey Modified AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1965 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to evaluate a modified and connector on the AM2 landing mat fabricated by Harvey Aluminum, Inc., Torrance, Calif. A test section, consisting of three clay subgrade items with different strengths and one sand item, was constructed and surfaced with the modified AM2 mat. The test section was subjected to traffic representing 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi.
Download or read book Evaluation of Harvey Two piece Landing Mat AM2 written by Cecil D. Burns and published by . This book was released on 1966 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The object of the investigation is to evaluate the performance of the Harvey two-piece AM-2 landing mat under accelerated traffic tests. (Author).
Download or read book Evaluation of Harvey and Kaiser Production AM2 Landing Mat written by Cecil D. Burns and published by . This book was released on 1969 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Harvey Nonwelded Aluminum Landing Mat written by Cecil D. Burns and published by . This book was released on 1969 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate the performance of the 1- and 2-ft-wide Harvey nonwelded aluminum landing mats and to compare the performance with that obtained in previous tests on standard AM2 mat. This landing mat was extruded by the Harvey Aluminum Co., Torrance, Calif. Three test sections were built and surfaced with different shipments or types of Harvey mat. The first and second sections were surfaced with 1- by 6-ft and 2- by 6-ft mat, respectively, each over two clay subgrade items with different CBR strength values. The third section consisted of two items surfaced with 2- by 12-ft and modified 2- by 12-ft mat over a subgrade of the same nominal strength as the lower subgrade strength of the first and second sections. All three test sections were subjected to uniform-coverage traffic, and section one was also subjected to single-line traffic. The traffic represented operations of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb with a 30-7.7 tire inflated to 400 psi. (Author).
Download or read book Evaluation of Various Sizes of Harvey Aluminum AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1966 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to determine the optimum panel size for the AM2 mat fabricated by Harvey Aluminum Company, Torrance, Calif. The basic AM2 mat was designed to sustain 1600 operational cycles of an aircraft having a gross weight of 60,000 lb with a single-wheel main-gear-assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. A test section consisting of three items with different subgrade strengths and surfaced with three different size mat panels was constructed and subjected to 188 coverages (equivalent to 1600 cycles of aircraft operations) of accelerated traffic of a 27,000-lb single-wheel load with a 30-7.7 tire inflated to 400 pri. The mat was also tested for its ability to sustain 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading that would be imposed on a landing mat during launching of a 60,000-lb aircraft by catapult.
Download or read book Evaluation of Harvey New Profile AM2 Landing Mat written by Cecil D. Burns and published by . This book was released on 1970 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This investigation was conducted to evaluate the new-profile AM2 landing mat, which was extruded and fabricated by Harvey Aluminum Company, Torrance, Calif. Three methods were used to attach end connectors to the 2-ft-wide main extrusion to form either the 2- by 12-ft or 2- by 6-ft planks. These methods were electron beam welded with inserts (EBI), electron beam welded without inserts (EB), and metal-inert-gas fusion welded without inserts (MIG). Two test sections, each consisting of two clay subgrade items at a strength of 4 CBR, were constructed and surfaced with the new-profile mat. Items 1 and 2 of test section 1 were surfaced with the EBI and EB mat, respectively. Both items in test section 2 were surfaced with the MIG welded mat, where two mat laying patterns were used so that the traffic lane in item 1 did not include any end joints and the traffic lane in item 2 incorporated 20 end joints. Each test section was subjected to uniform-coverage traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb with a 30x7.7 tire inflated to 400 psi.
Download or read book Evaluation of Guide Rail in Conjunction with Kaiser and Harvey Landing Mat AM2 written by Cecil D. Burns and published by . This book was released on 1966 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate the performance, under simulated aircraft loadings, of a guide rail (for use in assisted take-offs) designed for use with Airfield Matting No. 2 (AM2), Kaiser Aluminum Company's AM2 when used in conjunction with guide rail and when used without guide rail, and modified AM2 from Harvey Aluminum, Inc., when used in conjunction with guide rail. It was specifically desired to determine the effect that subgrade strength and soil type would have on the performance of the guide rail and AM2. (Author).
Download or read book Evaluation of Washington Aluminum Company AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1965 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of the investigation reported herein were to: (a) Evaluate the performance of the Washington AM2 mat under accelerated traffic tests with the wheel loadings contemplated under the SATS concept. (b) Compare the performance of the Washington mat with that of the original experimental AM2 mat designed and fabricated by Harvey. (c) Compare the quality of the extrusions furnished to Washington by Alcoa and Dow Chemical Co.
Download or read book Evaluation of Harvey and Kaiser Production AM2 Landing Mat written by Cecil Dawson Burns and published by . This book was released on 1969 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Three piece AM2 Aluminum Landing Mat written by William N. Brabston and published by . This book was released on 1967 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation was conducted to evaluate three-piece AM2 landing mat. The mat was fabricated from three 8-in.-wide extrusions welded together to form a 2-ft-wide plank. A test section consisting of one sand item and three clay subgrade items with various CBR strength values was constructed and surfaced with the three-piece mat. The test section was subjected to uniform-coverage and single-line traffic representing operations of an aircraft having a 60,000-lb gross weight with a single-wheel main gear assembly load of 27,000 lb with a 30.7.7 tire inflated to 400 psi. (Author).
Download or read book Evaluation of Butler AM2 Landing Mat written by William B. Fenwick and published by . This book was released on 1966 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study was conducted to compare the performance of aluminum landing mat fabricated by Butler Manufacturing Co. The primary method of comparison was by using CBR design curves which were developed to represent 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel, main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. CBR design curves were also developed for 1600 passes of a 39,000-lb single-wheel load applied in a single track to represent the calculated loading imposed on the landing mat during launching of the 60,000-lb aircraft by catapult. (Author).
Download or read book Evaluation of Harvey Aluminum 1 by 12 ft Extruded Light duty Landing Mat with Symmetrical Butt type End Connectors written by Hugh L. Green and published by . This book was released on 1972 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation reported herein was conducted to evaluate an extruded aluminum alloy landing mat. The 1- by 12-ft mat is a one-piece hollow extrusion fabricated from 6063 aluminum alloy artificially aged to the T6 condition and weights 2.81 lb per square foot of placing area. The mat panels are interlocked along the sides by means of a hinge-type connector, the components of which are integral parts of the basic extrusion. End connectors, which are composed of 6061-T6 extruded aluminum connectors with integral inserts welded to the basic panel using the electron beam welding method, consist of symmetrical butt-type sections that are secured by a locking bar after individual panels have been joined together. The investigation consisted of laboratory, traffic, and skid tests to obtain information for use in evaluating Harvey mat for poetential use as a light-duty landing mat. (Author).
Download or read book Evaluation of Harvey Aluminum 1 by 12 ft Extruded Light duty Landing Mat with Overlap underlap End Connectors written by Hugh L. Green and published by . This book was released on 1971 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Harvey Electron Beam Welded AM2 Landing Mat AM2 M002 written by Cecil D. Burns and published by . This book was released on 1969 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The investigation reported was conducted to evaluate the performance of the electron beam welded AM2 landing mat. A test section consisting of a heavy clay subgrade was constructed and surfaced with the electron beam welded AM2 mat, which will be known as AM2 mod 2. The test section was subjected to traffic representing 1600 operational cycles of an aircraft having a 60,000-lb gross weight with a single-wheel main-gear assembly load of 27,000 lb and a 30-7.7 tire inflated to 400 psi. Based on the results obtained in this investigation, it is concluded that the AM2 mod 2 mat will sustain 1600 cycles (188 coverages) of aircraft operations with a 27,000-lb single-wheel load and 400-psi tire inflation pressure when placed on a subgrade having a CBR of 3.6 or greater throughout the period of traffic, and electron beam welding of the end connectors resulted in considerable improvement in performance of the AM2 mod 2 mat over that of AM2 mat tested previously. (Author).
Download or read book List of Publications of the U S Army Engineer Waterways Experiment Station written by U.S. Army Engineer Waterways Experiment Station and published by . This book was released on 1976 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book List of Publications of the U S Army Engineer Waterways Experiment Station written by Waterways Experiment Station (U.S.) and published by . This book was released on 1973 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book List of Publications of the U S Army Engineers Waterway Experiment Station written by United States. Army. Corps of Engineers and published by . This book was released on 1976 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: