Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-05-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.

Download or read book Advanced Hybrid Powertrains for Commercial Vehicles written by Haoran Hu and published by SAE International. This book was released on 2021-04-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrains for commercial vehicles have evolved since the late nineteenth-century invention of the ICE. In the revised second edition of Advanced Hybrid Powertrains for Commercial Vehicles, the authors explore commercial powertrains through history from the ICE through the introduction of the hybrid powertrain in commercial vehicles. Readers are given an understanding of the ICE as well as the classification of commercial vehicle hybrid powertrains, the variety of energy storage systems, fuel-cell hybrid powertrain systems, and commercial vehicle electrification. The authors review the legislation of vehicle emissions and the regulation necessary to promote the production of fuel-efficient vehicles.

Download or read book Review of the U S Department of Energy s Heavy Vehicle Technologies Program written by National Research Council and published by National Academies Press. This book was released on 2000-12-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: As national priorities have been focused both on reducing fuel consumption and improving air quality, attention has increased on reducing emissions from many types of vehicles, including light-duty, medium-duty, and heavy-duty diesel-powered vehicles. Meeting the recently promulgated (and proposed) emission standards and simultaneously increasing fuel economy will pose especially difficult challenges for diesel-powered vehicles and will require the development of new emission-reduction technologies. In response to a request from the director of OHVT, the National Research Council formed the Committee on Review of DOE's Office of Heavy Vehicle Technologies to conduct a broad, independent review of its research and development (R&D) activities.

Download or read book Medium and Heavy Duty Fuel Efficiency Improvement Program written by and published by . This book was released on 2011 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Logistics Clusters written by Yossi Sheffi and published by MIT Press. This book was released on 2012-09-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: How logistics clusters can create jobs while providing companies with competitive advantage. Why is Memphis home to hundreds of motor carrier terminals and distribution centers? Why does the tiny island-nation of Singapore handle a fifth of the world's maritime containers and half the world's annual supply of crude oil? Which jobs can replace lost manufacturing jobs in advanced economies? Some of the answers to these questions are rooted in the phenomenon of logistics clusters—geographically concentrated sets of logistics-related business activities. In this book, supply chain management expert Yossi Sheffi explains why Memphis, Singapore, Chicago, Rotterdam, Los Angeles, and scores of other locations have been successful in developing such clusters while others have not. Sheffi outlines the characteristic “positive feedback loop” of logistics clusters development and what differentiates them from other industrial clusters; how logistics clusters “add value” by generating other industrial activities; why firms should locate their distribution and value-added activities in logistics clusters; and the proper role of government support, in the form of investment, regulation, and trade policy. Sheffi also argues for the most important advantage offered by logistics clusters in today's recession-plagued economy: jobs, many of them open to low-skilled workers, that are concentrated locally and not “offshorable.” These logistics clusters offer what is rare in today's economy: authentic success stories. For this reason, numerous regional and central governments as well as scores of real estate developers are investing in the development of such clusters. View a trailer for the book at: http://techtv.mit.edu/videos/22284-logistics-clusters-yossi-sheffi

Download or read book Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Research Council and published by National Academies Press. This book was released on 2014-10-02 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. This report comprises the first periodic, five-year follow-on to the 2010 report. Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two reviews NHTSA fuel consumption regulations and considers the technological, market and regulatory factors that may be of relevance to a revised and updated regulatory regime taking effect for model years 2019-2022. The report analyzes and provides options for improvements to the certification and compliance procedures for medium- and heavy-duty vehicles; reviews an updated analysis of the makeup and characterization of the medium- and heavy-duty truck fleet; examines the barriers to and the potential applications of natural gas in class 2b through class 8 vehicles; and addresses uncertainties and performs sensitivity analyses for the fuel consumption and cost/benefit estimates.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress written by Kevin Jost and published by SAE International. This book was released on 2016-09-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection highlights some of the best technical papers that represent the breadth of the entire technical program. Leading industry perspectives are reflected by the corporate contributions that are included in this group, along with a specific focus on connectivity, the theme of the 2016 event. The commercial vehicle industry has always been focused on improving efficiency. These ten characteristic offerings present cutting-edge trends, technologies, and solutions that provide greater benefit and the application of knowledge to solve problems and guide future innovation. These studies are presented by experts from industrial, governmental, and academic partners on topics that include: • Autonomous commercial vehicles • Computational fluid dynamics and aerodynamics for heavy-duty, on-road applications • Fuel and emissions efficiency of medium-duty powertrain configurations • Intelligently controlled air-suspension systems • Improving total cost of ownership by gains in thermal efficiency • New simulation and testing techniques enabling next generation commercial vehicle technology The leadership team has focused on bringing in a broad mixture of participants to COMVEC to discuss current technologies and the future challenges of the commercial vehicle industry. This first of its kind special publication draws on the strength of the event’s program and features ten of the best technical papers from the SAE International Congress.

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book Frontiers of Mechanical Engineering and Materials Engineering written by Wen Pei Sung and published by Trans Tech Publications Ltd. This book was released on 2012-06-14 with total page 1707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 International Conference on Frontiers of Mechanical Engineering and Materials Engineering (MEME 2012), July 27-29, 2012, HongKong

Download or read book Sustainable Freight Transport written by Lóri Tavasszy and published by MDPI. This book was released on 2018-12-10 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Sustainable Freight Transport" that was published in Sustainability

Download or read book Advances in Turbocharged Racing Engines written by Alberto Boretti and published by SAE International. This book was released on 2019-03-07 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Racing continues to provide the preeminent directive for advancing powertrain development for automakers worldwide. Formula 1, World Rally, and World Endurance Championship all provide engineering teams the most demanding and rigorous testing opportunities for the latest engine and technology designs. Turbocharging has seen significant growth in the passenger car market after years of development on racing circuits. Advances in Turbocharged Racing Engines combines ten essential SAE technical papers with introductory content from the editor on turbocharged engine use in F1, WRC, and WEC-recognizing how forced induction in racing has impacted production vehicle powertrains. Topics featured in this book include: Fundamental aspects of design and operation of turbocharged engines Electric turbocharger usage in F1 Turbocharged engine research by Toyota, SwRI and US EPA, Honda, and Caterpillar This book provides a historical and relevant insight into research and development of racing engines. The goal is to provide the latest advancements in turbocharged engines through examples and case studies that will appeal to engineers, executives, instructors, students, and enthusiasts alike.

Download or read book Energy and Water Development Appropriations for 2015 Department of Energy Environmental Management FY 2015 budget applied energy funding FY 2015 budget science FY 2015 budget written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2014 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Departments of Transportation and Housing and Urban Development and Related Agencies Appropriations For 2011 Part 2 111 2 Hearings written by and published by . This book was released on 2010 with total page 1370 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Review of the 21st Century Truck Partnership Second Report written by National Research Council and published by National Academies Press. This book was released on 2012-07-04 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: In July 2010, the National Research Council (NRC) appointed the Committee to Review the 21st Century Truck Partnership, Phase 2, to conduct an independent review of the 21st Century Truck Partnership (21CTP). The 21CTP is a cooperative research and development (R&D) partnership including four federal agencies-the U.S. Department of Energy (DOE), U.S. Department of Transportation (DOT), U.S. Department of Defense (DOD), and the U.S. Environmental Protection Agency (EPA)-and 15 industrial partners. The purpose of this Partnership is to reduce fuel consumption and emissions, increase heavy-duty vehicle safety, and support research, development, and demonstration to initiate commercially viable products and systems. This is the NRC's second report on the topic and it includes the committee's review of the Partnership as a whole, its major areas of focus, 21CTP's management and priority setting, efficient operations, and the new SuperTruck program.