Download or read book Recent Insights in Petroleum Science and Engineering written by Mansoor Zoveidavianpoor and published by BoD – Books on Demand. This book was released on 2018-02-07 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new insights into the development of different aspects of petroleum science and engineering. The book contains 19 chapters divided into two main sections: (i) Exploration and Production and (ii) Environmental Solutions. There are 11 chapters in the first section, and the focus is on the topics related to exploration and production of oil and gas, such as characterization of petroleum source rocks, drilling technology, characterization of reservoir fluids, and enhanced oil recovery. In the second section, the special emphasis is on waste technologies and environmental cleanup in the downstream sector. The book written by numerous prominent scholars clearly shows the necessity of the multidisciplinary approach to sustainable development in the petroleum industry and stresses the most updated topics such as EOR and environmental cleanup of fossil fuel wastes.

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Phase Behavior written by Curtis H. Whitson and published by Society of Petroleum Engineers. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Behavior provides the reader with the tools needed to solve problems requiring a description of phase behavior and specific pressure/volume/temperature (PVT) properties.

Download or read book Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2016-11-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Phase Behavior for Conventional and Unconventional Oil and Gas Reservoirs delivers information on the role of PVT (pressure-volume-temperature) tests/data in various aspects, in particular reserve estimation, reservoir modeling, flow assurance, and enhanced oil recovery for both conventional and unconventional reservoirs. This must-have reference also prepares engineers on the importance of PVT tests, how to evaluate the data, develop an effective management plan for flow assurance, and gain perspective of flow characterization, with a particular focus on shale oil, shale gas, gas hydrates, and tight oil making. This book is a critical resource for today's reservoir engineer, helping them effectively manage and maximize a company's oil and gas reservoir assets. - Provides tactics on reservoir phase behavior and dynamics with new information on shale oil and gas hydrates - Helps readers Improve on the effect of salt concentration and application to C02-Acid Gas Disposal with content on water-hydrocarbon systems - Provides practical experience with PVT and tuning of EOS with additional online excel spreadsheet examples

Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.

Download or read book Petroleum Abstracts Literature and Patents written by and published by . This book was released on 1989 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil

Download or read book Petroleum Refinery Process Modeling written by Y. A. Liu and published by John Wiley & Sons. This book was released on 2018-02-09 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the theory and practice of the simulation and optimization of the petroleum refining processes Petroleum Refinery Process Modeling offers a thorough review of how to quantitatively model key refinery reaction and fractionation processes. The text introduces the basics of dealing with the thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling. The authors - three experts on the topic - outline the procedures and include the key data required for building reaction and fractionation models with commercial software. The text shows how to filter through the extensive data available at the refinery and using plant data to begin calibrating available models and extend the models to include key fractionation sub-models. It provides a sound and informed basis to understand and exploit plant phenomena to improve yield, consistency, and performance. In addition, the authors offer information on applying models in an overall refinery context through refinery planning based on linear programming. This important resource: -Offers the basic information of thermodynamics and physical property predictions of hydrocarbon components in the context of process modeling -Uses the key concepts of fractionation lumps and physical properties to develop detailed models and workflows for atmospheric (CDU) and vacuum (VDU) distillation units -Discusses modeling FCC, catalytic reforming and hydroprocessing units Written for chemical engineers, process engineers, and engineers for measurement and control, this resource explores the advanced simulation tools and techniques that are available to support experienced and aid new operators and engineers.

Download or read book Phase Behavior of Petroleum Reservoir Fluids written by Karen Schou Pedersen and published by CRC Press. This book was released on 2006-11-01 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phase behavior of the various fluids present in a petroleum reservoir is essential for achieving optimal design and cost-effective operations in a petroleum processing plant. Taking advantage of the authors' experience in petroleum processing under challenging conditions, Phase Behavior of Petroleum Reservoir Fluids introdu

Download or read book Energy Progress written by and published by . This book was released on 1983 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol. 5, no. 1 (Mar. 1985)- includes the American Institute of Chemical Engineers, Fuels and Petrochemicals Division newsletter.

Download or read book Asphaltene Deposition written by Francisco M. Vargas and published by CRC Press. This book was released on 2018-05-16 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global consumption of fossil fuels such as oil increases, previously abundant sources have become depleted or plagued with obstructions. Asphaltene deposition is one of such obstructions which can significantly decrease the rate of oil production. This book offers concise yet thorough coverage of the complex problem of asphaltene precipitation and deposition in oil production. It covers fundamentals of chemistry, stabilization theories and mechanistic approaches of asphaltene behavior at high temperature and pressure. Asphaltene Deposition: Fundamentals, Prediction, Prevention, and Remediation explains techniques for experimental determination of asphaltene precipitation and deposition and different modeling tools available to forecast the occurrence and magnitude of asphaltene deposition in a given oil field. It discusses strategies for mitigation of asphaltene deposition using chemical inhibition and corresponding challenges, best practices for asphaltene remediation, current research, and case studies.

Download or read book Applied Hydrocarbon Thermodynamics written by Wayne C. Edmister and published by . This book was released on 1984 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous closed systems - Heterogeneous closed systems - P-V-T data and correlations - Equations of state - Corresponding states methods - Pure component properties - Thermodynamic properties charts - Vapor-liquid equilibrium processes - Vapor-liquid equilibrium k-values and graphical correlations.

Download or read book Hydrocarbon Phase Behavior written by Tarek H. Ahmed and published by Butterworth-Heinemann. This book was released on 1989 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.

Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1984 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining