Download or read book Evaluation of a Method for Computation of Separated Turbulent Compressible Boundary Layers written by M. C. Altstatt and published by . This book was released on 1976 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: A computer code for a turbulent, compressible boundary-layer method, capable of carrying out computations in a region of separated flow, is developed and tested. The procedure after separation is to specify either friction velocity or boundary-layer thickness as an independent variable and obtain external velocity as a dependent variable. This requires a trial and error alternation of the specified variable in order to match the desired experimental or computed external velocity. Satisfactorily results were obtained by this method in the analysis of certain specialized cases of separated flow. (Author).

Download or read book Inhibition of Flow Separation at High Speed written by Larry L. Lynes and published by . This book was released on 1969 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of integral relations was successfully applied to compressible nonadiabatic turbulent boundary layers on a flat plate. The theory is designed to accept any desired eddy-viscosity model. A particular eddy-viscosity model was incorporated into the method, and the equations were programmed for application to a flat plate with no pressure gradient. The variations of the skin-friction coefficient with Reynolds number, Mach number, and temperature ratio were calculated using this program, and the results are in good accord with similar results calculated by the Spalding-Chi method and the Rubesin T' method. An analysis was made to predict to what extent turbulent separation of the free-interaction type can be inhibited by means of surface cooling. It was observed experimentally that free-interaction is applicable to separated turbulent boundary layers up to the separation point or beyond. The free-interaction model used in the analysis is based on adding the boundary-layer displacement thickness to the actual body dimensions in calculating the induced pressures. The critical temperature ratios calculated on this basis are generally greater than adiabatic wall temperature except in the supersonic range up to a Mach number approaching 3, where moderate cooling is required to inhibit separation.

Download or read book Modeling and Computation of Boundary Layer Flows written by Tuncer Cebeci and published by Springer. This book was released on 2009-09-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of the book, Modeling and Computation of Boundary-Layer Flows^ extends the topic to include compressible flows. This implies the inclusion of the energy equation and non-constant fluid properties in the continuity and momentum equations. The necessary additions are included in new chapters, leaving the first nine chapters to serve as an introduction to incompressible flows and, therefore, as a platform for the extension. This part of the book can be used for a one semester course as described below. Improvements to the incompressible flows portion of the book include the removal of listings of computer programs and their description, and their incor poration in two CD-ROMs. A listing of the topics incorporated in the CD-ROM is provided before the index. In Chapter 7 there is a more extended discussion of initial conditions for three-dimensional flows, application of the characteristic box to a model problem and discussion of flow separation in three-dimensional laminar flows. There are also changes to Chapter 8, which now includes new sections on Tollmien-Schlichting and cross-flow instabilities and on the predic tion of transition with parabolised stability equations, and Chapter 9 provides a description of the rational behind interactive boundary-layer procedures.

Download or read book NASA Technical Paper written by and published by . This book was released on 1978 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Turbulent Boundary Layers written by Tuncer Cebeci and published by Elsevier. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Turbulent Boundary Layers focuses on turbulent flows meeting the requirements for the boundary-layer or thin-shear-layer approximations. Its approach is devising relatively fundamental, and often subtle, empirical engineering correlations, which are then introduced into various forms of describing equations for final solution. After introducing the topic on turbulence, the book examines the conservation equations for compressible turbulent flows, boundary-layer equations, and general behavior of turbulent boundary layers. The latter chapters describe the CS method for calculating two-dimensional and axisymmetric laminar and turbulent boundary layers. This book will be useful to readers who have advanced knowledge in fluid mechanics, especially to engineers who study the important problems of design.

Download or read book Boundary layer Separation on Isolated Boattail Nozzles written by William Kelly Abeyounis and published by . This book was released on 1978 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Turbulent Flows with Computer Programs written by Tuncer Cebeci and published by Elsevier. This book was released on 2004-04-20 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Computation of Turbulent Flows has been written by one of the most prolific authors in the field of CFD. Professor of aerodynamics at SUPAERO and director of DMAE at ONERA, the author calls on both his academic and industrial experience when presenting this work. The field of CFD is strongly represented by the following corporate companies; Boeing; Airbus; Thales; United Technologies and General Electric, government bodies and academic institutions also have a strong interest in this exciting field. Each chapter has also been specifically constructed to constitute as an advanced textbook for PhD candidates working in the field of CFD, making this book essential reading for researchers, practitioners in industry and MSc and MEng students. * A broad overview of the development and application of Computational Fluid Dynamics (CFD), with real applications to industry* A Free CD-Rom which contains computer program’s suitable for solving non-linear equations which arise in modeling turbulent flows* Professor Cebeci has published over 200 technical papers and 14 books, a world authority in the field of CFD

Download or read book Compressible Turbulent Boundary Layers written by and published by . This book was released on 1969 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Method of Calculating Compressible Turbulent Boundary Layers written by H. James Herring and published by . This book was released on 1968 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Solution of the Equations for Compressible Laminar Transitional and Turbulent Boundary Layers and Comparisons with Experimental Data written by Julius E. Harris and published by . This book was released on 1971 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: A numerical method for solving the equations for laminar, transitional, and turbulent compressible boundary layers for either planar or axisymmetric flows is presented. The fully developed turbulent region is treated by replacing the Reynolds stress terms with an eddy viscosity model. The mean properties of the transitional boundary layer are calculated by multiplying the eddy viscosity by an intermittency function based on the statistical production and growth of the turbulent spots. A specifiable turbulent Prandtl number relates the turbulent flux of heat to the eddy viscosity. A three-point implicit finite-difference scheme is used to solve the system of equations. The momentum and energy equations are solved simultaneously without iteration. Numerous test cases are compared with experimental data for supersonic and hypersonic flows; these cases include flows with both favorable and mildly unfavorable pressure gradient histories, mass flux at the wall, and traverse curvature.

Download or read book Calculation of Turbulent Boundary Layers with Heat Transfer and Pressure Gradient Utilizing a Compressibility Transformation written by J. Boccio and published by . This book was released on 1972 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis of the incompressible turbulent boundary layer, developing under the combined effects of mass transfer and pressure gradient, is presented in this paper. A strip-integral method is employed whereby two of the three governing equations are obtained by integrating the combined momentum and continuity equation to 50 percent and 100 percent, respectively, of the boundary-layer height. The latter equation is the usual momentum-integral equation; the former equation requires specification of shear. Accordingly, Clauser's equilibrium eddy-viscosity law is assumed valid at this point. The third and final equation is obtained by specifying that Stevenson's velocity profiles apply throughout the domain of interest, from which a skin-friction law can be derived. Comparisons of the numerical results with the experiments of McQuaid, which include combined effects of variable pressure gradient and mass transfer, show good agreement.

Download or read book Boundary Layer Flows written by Vallampati Ramachandra Prasad and published by BoD – Books on Demand. This book was released on 2023-02-22 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of boundary layer flows, including laminar and turbulent flows. Chapters discuss such topics as the nature of transition, the effect of two-dimensional and isolated roughness on laminar flow, and progress in the design of low-drag airfoils. They also present theoretical and experimental results in boundary layer flows and discuss directions for future research.

Download or read book Computation of Turbulent Boundary Layers 1968 AFOSR IFP Stanford Conference written by Stephen Jay Kline and published by . This book was released on 1969 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Review of High speed Convective Heat transfer Computation Methods written by Michael E. Tauber and published by . This book was released on 1989 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Experimental and Analytic Investigation of a Transonic Shock wave boundary layer Interaction written by M. C. Alstatatt and published by . This book was released on 1977 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two wind tunnel tests were conducted in a flow exhibiting a shock-wave/boundary-layer interaction of the type occurring on airfoils at transonic velocities. Boundary-layer pressure distributions were measured with pitot and static probes. Velocities in the free stream and in the boundary layer were obtained with a laser velocimeter (LV) system, and a data reduction program for the LV results was developed. Measurements from the pressure probes and from the LV system are compared with each other and with theoretical computations. It was found that the analytic models for boundary-layer velocity profile and Reynolds stress agree well with experimental measurements. (Author).

Download or read book A Computational Method for Subsonic Compressible Flow in Diffusers written by Stanford University. Thermosciences Division. Thermosciences Division and published by . This book was released on 1981 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diffusers are a class of internal flow devices used to decelerate a fluid flow and convert the kinetic energy of motion to increased pressure. For subsonic flow, which is considered in this report, diffusers are passages of.