Download or read book Evaluation Findings for Seismic Energy Products L P Elastomeric Isolation Bearing written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2001-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report presents the results of a detailed evaluation for one seismic isolator supplied by Seismic Energy Products, L.P. The evaluation is designed to test the performance of seismic isolators and dampers.
Download or read book Evaluation Findings for Seismic Energy Products L P Elastomeric Isolation Bearing written by and published by Amer Society of Civil Engineers. This book was released on 2001-01-01 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the results of a detailed evaluation designed to test the performance of seismic isolators and dampers
Download or read book Guidelines for Testing Large Seismic Isolator and Energy Dissipation Devices written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and performance characteritics of a wide range of devices produced by U.S. and overseas manufacturers. It describes a program of full-scale dynamic tests, the results of which should provide guidance to the transportation-engineering community regarding the performance of large seismic devices.
Download or read book Evaluation of Thermocoax Piezoelectric Weigh in Motion Sensors written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2001-01-01 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes a program of installation, testing, and evaluation designed to determine the capabilities and limitations of Thermocoax's weigh-in-motion sensor.
Download or read book Evaluation of the Tricon Retained Soil Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center, a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the Tricon System for use as a technically viable, precast, mechanically stabilized earth-retaining wall system. The evaluation considered material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol.
Download or read book Evaluation of the Geo Con VERT Wall System written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 2002-01-01 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed to determine the basic capabilites and limitations of the Geo-Con VERT Wall for use as a technically viable permanent excavation support retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Geo-Con VERT Wall System is an in-situ retaining wall system intended as an alternative to other types of cut walls such as soldier pile and anchored retaining walls. Geo-Con VERT Wall System is comprised of: deep soil mix columns consisting of overlapping or tangent soil-cement columns along the front face backed up by tangent rows of overlapping soil-cement columns; a soil-cement relieving platform overtop the columns; steel beams embedded in the front face soil-cement columns for support of the permanent facing; and permanent facing consisting of precast, reinforced concrete panels or reinforced cast-in-place concrete. The relieving platform is intended to provide internal stability by typing the soil-mix columns together and transferring the load to the bottom of the columns.
Download or read book Environmental Technology Verification Report for the Plasma Enhanced Melter written by and published by ASCE Publications. This book was released on 2003-01-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.
Download or read book Mechanics of Rubber Bearings for Seismic and Vibration Isolation written by James M. Kelly and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in civil, mechanical and automotive engineering since the early 1980s, multilayer rubber bearings have been used as seismic isolation devices for buildings in highly seismic areas in many countries. Their appeal in these applications comes from their ability to provide a component with high stiffness in one direction with high flexibility in one or more orthogonal directions. This combination of vertical stiffness with horizontal flexibility, achieved by reinforcing the rubber by thin steel shims perpendicular to the vertical load, enables them to be used as seismic and vibration isolators for machinery, buildings and bridges. Mechanics of Rubber Bearings for Seismic and Vibration Isolation collates the most important information on the mechanics of multilayer rubber bearings. It explores a unique and comprehensive combination of relevant topics, covering all prerequisite fundamental theory and providing a number of closed-form solutions to various boundary value problems as well as a comprehensive historical overview on the use of isolation. Many of the results presented in the book are new and are essential for a proper understanding of the behavior of these bearings and for the design and analysis of vibration or seismic isolation systems. The advantages afforded by adopting these natural rubber systems is clearly explained to designers and users of this technology, bringing into focus the design and specification of bearings for buildings, bridges and industrial structures. This comprehensive book: includes state of the art, as yet unpublished research along with all required fundamental concepts; is authored by world-leading experts with over 40 years of combined experience on seismic isolation and the behavior of multilayer rubber bearings; is accompanied by a website at www.wiley.com/go/kelly The concise approach of Mechanics of Rubber Bearings for Seismic and Vibration Isolation forms an invaluable resource for graduate students and researchers/practitioners in structural and mechanical engineering departments, in particular those working in seismic and vibration isolation.
Download or read book Subject Guide to Books in Print written by and published by . This book was released on 1997 with total page 3310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Book Publishing Record written by and published by . This book was released on 2001 with total page 2744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation Findings for Skellerup Base Isolation Elastomeric Bearings written by Highway Innovative Technology Evaluation Center (U.S.) and published by ASCE Publications. This book was released on 1998-01-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of base isolation elastomeric bearings,Ømanufactured by Skellerup. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1983 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book Design of Seismic Isolated Structures written by Farzad Naeim and published by John Wiley & Sons. This book was released on 1999-03-25 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult. Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices.
Download or read book Transit Noise and Vibration Impact Assessment written by Carl Hanson and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
