Download or read book Evaluating the Measurement Process written by Donald J. Wheeler and published by SPC Press, Incorporated. This book was released on 1989 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The procedures : inadequate measurement units - Consistency and bias - Interpreting measurements - EMP studies : components of measurement error - The relative usefulness of a measurement - EMP case histories : the data for gauge 130 - Two methods for measuring viscosity - The truck spoke data - The data for polymer 62S - The compression test data.
Download or read book Evaluating Measurement Accuracy written by Semyon G Rabinovich and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Evaluating Measurement Accuracy, 2nd Edition” is intended for those who are concerned with measurements in any field of science or technology. It reflects the latest developments in metrology and offers new results, but is designed to be accessible to readers at different levels: scientists who advance the field of metrology, engineers and experimental scientists who use measurements as tool in their professions, students and graduate students in natural sciences and engineering, and, in parts describing practical recommendations, technicians performing mass measurements in industry, quality control, and trade. This book presents material from the practical perspective and offers solutions and recommendations for problems that arise in conducting real-life measurements. This new edition adds a method for estimating accuracy of indirect measurements with independent arguments, whose development Dr. Rabinovich was able to complete very recently. This method, which is called the Method of Enumeration, produces estimates that are no longer approximate, similar to the way the method of reduction described in the first edition removed approximation in estimating uncertainty of indirect measurements with dependent arguments. The method of enumeration completes addressing the range of problems whose solutions signify the emergence of the new theory of accuracy of measurements. A new method is added for building a composition of histograms, and this method forms a theoretical basis for the method of enumeration.Additionally, as a companion to this book, a concise practical guide that assembles simple step-by-step procedures for typical tasks the practitioners are likely to encounter in measurement accuracy estimation is available at SpringerLink.
Download or read book Evaluating Measurement Accuracy written by Semyon G. Rabinovich and published by Springer Science & Business Media. This book was released on 2009-12-11 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Evaluating Measurement Accuracy" is intended for anyone who is concerned with measurements in any field of science or technology. It reflects the latest developments in metrology and offers new results, but is designed to be accessible to readers at different levels: meteorologists, engineers and experimental scientists who use measurements as tools in their professions, graduate and undergraduate students in the natural sciences and engineering, and technicians performing complex measurements in industry, quality control, and trade. The material of the book is presented from the practical perspective and offers solutions and recommendations for problems that arise in conducting real-life measurements. This inclusion is a notable and unique aspect of this title as complex measurements done in industry and trade are often neglected in metrological literature, leaving the practitioners of these measurements to devise their own ad-hoc techniques.
Download or read book Emp III written by Donald J. Wheeler and published by S P C Press. This book was released on 2006 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques for assessing and characterizing physical measurement systems are organized, described, and illustrated using real data. Clear answers are given to the question of how and when imperfect data can be used in practice. This book will enable you to use imperfect data to characterize and improve your operations and processes.64 Examples, 40 Data Tables, 8 Appendicies, 25 Reference Tables, 3 Worksheets
Download or read book Performance Assessment for the Workplace written by National Research Council and published by National Academies Press. This book was released on 1991-01-01 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ability testing has been an American preoccupation since the 1920s, comparatively little systematic attention has been paid to understanding and measuring the kinds of human performance that tests are commonly used to predictâ€"such as success at school or work. Now, a sustained, large-scale effort has been made to develop measures that are very close to actual performance on the job. The four military services have carried out an ambitious study, called the Joint-Service Job Performance Measurement/Enlistment Standards (JPM) Project, that brings new sophistication to the measurement of performance in work settings. Volume 1 analyzes the JPM experience in the context of human resource management policy in the military. Beginning with a historical overview of the criterion problem, it looks closely at substantive and methodological issues in criterion research suggested by the project: the development of performance measures; sampling, logistical, and standardization problems; evaluating the reliability and content representativeness of performance measures; and the relationship between predictor scores and performance measuresâ€"valuable information that can also be useful in the civilian workplace.
Download or read book The SAGE Encyclopedia of Educational Research Measurement and Evaluation written by Bruce B. Frey and published by SAGE Publications. This book was released on 2018-01-29 with total page 1996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia is the first major reference guide for students new to the field, covering traditional areas while pointing the way to future developments.
Download or read book Evaluating Measurement Accuracy written by Semyon G. Rabinovich and published by Springer. This book was released on 2017-09-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic and comprehensive exposition of the theory of measurement accuracy and provides solutions that fill significant and long-standing gaps in the classical theory. It eliminates the shortcomings of the classical theory by including methods for estimating accuracy of single measurements, the most common type of measurement. The book also develops methods of reduction and enumeration for indirect measurements, which do not require Taylor series and produce a precise solution to this problem. It produces grounded methods and recommendations for summation of errors. The monograph also analyzes and critiques two foundation metrological documents, the International Vocabulary of Metrology (VIM) and the Guide to the Expression of Uncertainty in Measurement (GUM), and discusses directions for their revision. This new edition adds a step-by-step guide on how to evaluate measurement accuracy and recommendations on how to calculate systematic error of multiple measurements. There is also an extended section on the method of reduction, which provides an alternative to the least-square method and the method of enumeration. Many sections are also rewritten to improve the structure and usability of the material. The 3rd edition reflects the latest developments in metrology and offers new results, and it is designed to be accessible to readers at various levels and positions, including scientists, engineers, and undergraduate and graduate students. By presenting material from a practical perspective and offering solutions and recommendations for problems that arise in conducting real-life measurements, author Semyon Rabinovich offers an invaluable resource for scientists in any field.
Download or read book Evaluating Measurement Accuracy written by S. G. Rabinovich and published by . This book was released on 2010 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Evaluating Measurement Accuracy: A Practical Approach is to present methods for estimating the accuracy of measurements performed in industry, trade, and scientific research. Although multiple measurements are the focus of current theory, single measurements are the ones most commonly used. This book answers fundamental questions not addressed by present theory, such as how to discover the complete uncertainty of a measurement result. In developing a general theory of processing experimental data, this book, for the first time, presents the postulates of the theory of measurements. It introduces several new terms and definitions about the relationship between the accuracy of measuring instruments and measurements utilizing these instruments. It also offers well-grounded and practical methods for combining the components of measurement inaccuracy. From developing the theory of indirect measurements to proposing new methods of reduction in place of the traditional ones, this work encompasses the full range of measurement data processing. It includes many solid examples that exemplify typical problems encountered in measurement practice, from general theory to practical applications. As a result, Evaluating Measurement Accuracy serves as an inclusive reference work for data processing of all types of measurements: single and multiple, dependent and independent indirect, combined, and simultaneous. It is intended as a working tool for experimental scientists and engineers of all disciplines who work with instrumentation. It is also a good tool for undergraduate and graduate natural science and engineering students and for technicians performing complex measurements in industry.
Download or read book Assessing 21st Century Skills written by National Research Council and published by National Academies Press. This book was released on 2011-10-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The routine jobs of yesterday are being replaced by technology and/or shipped off-shore. In their place, job categories that require knowledge management, abstract reasoning, and personal services seem to be growing. The modern workplace requires workers to have broad cognitive and affective skills. Often referred to as "21st century skills," these skills include being able to solve complex problems, to think critically about tasks, to effectively communicate with people from a variety of different cultures and using a variety of different techniques, to work in collaboration with others, to adapt to rapidly changing environments and conditions for performing tasks, to effectively manage one's work, and to acquire new skills and information on one's own. The National Research Council (NRC) has convened two prior workshops on the topic of 21st century skills. The first, held in 2007, was designed to examine research on the skills required for the 21st century workplace and the extent to which they are meaningfully different from earlier eras and require corresponding changes in educational experiences. The second workshop, held in 2009, was designed to explore demand for these types of skills, consider intersections between science education reform goals and 21st century skills, examine models of high-quality science instruction that may develop the skills, and consider science teacher readiness for 21st century skills. The third workshop was intended to delve more deeply into the topic of assessment. The goal for this workshop was to capitalize on the prior efforts and explore strategies for assessing the five skills identified earlier. The Committee on the Assessment of 21st Century Skills was asked to organize a workshop that reviewed the assessments and related research for each of the five skills identified at the previous workshops, with special attention to recent developments in technology-enabled assessment of critical thinking and problem-solving skills. In designing the workshop, the committee collapsed the five skills into three broad clusters as shown below: Cognitive skills: nonroutine problem solving, critical thinking, systems thinking Interpersonal skills: complex communication, social skills, team-work, cultural sensitivity, dealing with diversity Intrapersonal skills: self-management, time management, self-development, self-regulation, adaptability, executive functioning Assessing 21st Century Skills provides an integrated summary of the presentations and discussions from both parts of the third workshop.
Download or read book Impact Evaluation in Practice Second Edition written by Paul J. Gertler and published by World Bank Publications. This book was released on 2016-09-12 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Impact Evaluation in Practice handbook is a comprehensive and accessible introduction to impact evaluation for policy makers and development practitioners. First published in 2011, it has been used widely across the development and academic communities. The book incorporates real-world examples to present practical guidelines for designing and implementing impact evaluations. Readers will gain an understanding of impact evaluations and the best ways to use them to design evidence-based policies and programs. The updated version covers the newest techniques for evaluating programs and includes state-of-the-art implementation advice, as well as an expanded set of examples and case studies that draw on recent development challenges. It also includes new material on research ethics and partnerships to conduct impact evaluation. The handbook is divided into four sections: Part One discusses what to evaluate and why; Part Two presents the main impact evaluation methods; Part Three addresses how to manage impact evaluations; Part Four reviews impact evaluation sampling and data collection. Case studies illustrate different applications of impact evaluations. The book links to complementary instructional material available online, including an applied case as well as questions and answers. The updated second edition will be a valuable resource for the international development community, universities, and policy makers looking to build better evidence around what works in development.
Download or read book Measurements in Evaluating Science Education written by Amy J. Catalano and published by Routledge. This book was released on 2020 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Measurements in Evaluating Science Education is a comprehensive, intuitive guide to many of the key instruments created to assess science education environments, learning, and instruction. Nearly 70 different surveys, tests, scales, and other metrics are organized according to the qualities the measures attempt to gauge, such as attitudes toward science, beliefs and misconceptions, self-efficacy, and content knowledge. Summaries of each instrument, usage information, developmental history and validation, and reported psychometric properties make this an essential reference for anyone interested in understanding science education assessment"--
Download or read book Measurement and Evaluation in Physical Activity Applications written by Phillip A. Bishop and published by Taylor & Francis. This book was released on 2017-06-30 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a learner-oriented approach as it strives to make complex material understandable and usable. By understanding the underlying principles of measurement and evaluation, readers will then be able to apply those principles and concepts in a variety of physical activity and health-related settings. Practical exercises and applications demonstrate the usefulness of measurement and evaluation, reinforce key points, and make readers active participants in their own education. The book is divided into three parts. Part One introduces the measurement process, showing readers the relevance of measurement and evaluation to their personal and professional lives, and including examples and statistics related to such concepts as validity, reliability, and objectivity. The two chapters in Part Two further help readers understand numbers and assist those who need to use more advanced statistical calculations. Part Three presents measurement and evaluation applications in various settings, such as measuring physical fitness; measuring exercise, physical activity, and health; measuring in competitive sports and coaching; measuring and evaluating knowledge and assigning grades; and measuring in research. Throughout, discussions and examples show the relevance and application of measurement and evaluation in various professions, including physical therapy, athletic training, fitness/wellness management, exercise and sport psychology, exercise science, coaching, and physical education.
Download or read book Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results rev Ed written by Barry N. Taylor and published by DIANE Publishing. This book was released on 2009-11 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Results of measurements and conclusions derived from them constitute much of the technical information produced by the National Institute of Standards and Technology (NIST). In July 1992 the Director of NIST appointed an Ad Hoc Committee on Uncertainty Statements and charged it with recommending a policy on this important topic. The Committee concluded that the CIPM approach could be used to provide quantitative expression of measurement that would satisfy NIST¿s customers¿ requirements. NIST initially published a Technical Note on this issue in Jan. 1993. This 1994 edition addresses the most important questions raised by recipients concerning some of the points it addressed and some it did not. Illustrations.
Download or read book Evaluating Programs to Increase Student Achievement written by Martin H. Jason and published by Corwin Press. This book was released on 2008-03-27 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition on evaluating the effectiveness of school programs provides an expanded needs-assessment section, additional methods for data analysis, and tools for communicating program results.
Download or read book The Handbook of Public Sector Communication written by Vilma Luoma-aho and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary collection on global public entity strategic communication Research into public sector communication investigates the interaction between public and governmental entities and citizens within their sphere of influence. Today’s public sector organizations are operating in environments where people receive their information from multiple sources. Although modern research demonstrates the immense impact public entities have on democracy and societal welfare, communication in this context is often overlooked. Public sector organizations need to develop “communicative intelligence” in balancing their institutional agendas and aims of public engagement. The Handbook of Public Sector Communication is the first comprehensive volume to explore the field. This timely, innovative volume examines the societal role, environment, goals, practices, and development of public sector strategic communication. International in scope, this handbook describes and analyzes the contexts, policies, issues, and questions that shape public sector communication. An interdisciplinary team of leading experts discusses diverse subjects of rising importance to public sector, government, and political communication. Topics include social exchange relationships, crisis communication, citizen expectations, measuring and evaluating media, diversity and inclusion, and more. Providing current research and global perspectives, this important resource: Addresses the questions public sector communicators face today Summarizes the current state of public sector communication worldwide Clarifies contemporary trends and practices including mediatization, citizen engagement, and change and expectation management Addresses global challenges and crises such as corruption and bureaucratic roadblocks Provides a framework for measuring communication effectiveness Requiring minimal prior knowledge of the field, The Handbook of Public Sector Communication is a valuable tool for academics, students, and practitioners in areas of public administration, public management, political communication, strategic and organizational communication, and related fields such as political science, sociology, marketing, journalism, and globalization studies.
Download or read book Measurement Evaluation written by A. Boros and published by Elsevier. This book was released on 2012-12-02 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The information obtained about a measured object is called ``crude'' measurement information and must be related to the conditions under which the measurement took place. Using ``crude'' measurement information as a starting point, evaluation produces physically correctly interpreted data with their estimated (or corrected) error. Although a number of works deal with the evaluation of measurements, they either appeared a long time ago or serve essentially different aims. This book gives a comprehensive and current overview on the basic principles, aids, devices, and methods in the evaluation of measurements performed in all fields of technology and science in order to gain information about physical or technical objects. It also provides an introduction to the more recent problem areas such as frequency analysis, stochastic measurement information, real time treatment of measurement information, etc. The book will prove useful in solving the problem areas encountered by those involved in measurement technology and measurement evaluation. It will also serve as an introduction to those not possessing any specialized and advanced technical training in the subject matter.
Download or read book Partial Least Squares Structural Equation Modeling PLS SEM Using R written by Joseph F. Hair Jr. and published by Springer Nature. This book was released on 2021-11-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Partial least squares structural equation modeling (PLS-SEM) has become a standard approach for analyzing complex inter-relationships between observed and latent variables. Researchers appreciate the many advantages of PLS-SEM such as the possibility to estimate very complex models and the method’s flexibility in terms of data requirements and measurement specification. This practical open access guide provides a step-by-step treatment of the major choices in analyzing PLS path models using R, a free software environment for statistical computing, which runs on Windows, macOS, and UNIX computer platforms. Adopting the R software’s SEMinR package, which brings a friendly syntax to creating and estimating structural equation models, each chapter offers a concise overview of relevant topics and metrics, followed by an in-depth description of a case study. Simple instructions give readers the “how-tos” of using SEMinR to obtain solutions and document their results. Rules of thumb in every chapter provide guidance on best practices in the application and interpretation of PLS-SEM.