Download or read book Evaluating Surface Treatment Effects on Interfacial Bond Strength Using Dynamic Mechanical Analysis written by RJ. Cano and published by . This book was released on 1993 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three series of torsional dynamic mechanical analysis (DMA) tests were conducted on unidirectional carbon/epoxy composites to determine differences in interfacial bond strength. For the first series, composites were manufactured with PAN-based and pitch-based carbon fibers. The fibers had a proprietary surface treatment. For the second series of tests, the composites were made with four grades of pitch-based carbon fibers. Two different methods of surface treatment were used on the fibers. As a comparison, short beam shear tests were conducted on the composites made with fibers which had different surface treatments. The final series of tests were conducted on composite samples made from one grade of pitch-based fibers with four different fiber volume fractions. All samples were made using the same matrix material. Dynamic mechanical analysis was able to clearly differentiate between the fiber/matrix bond strength of pitch-based and PAN-based fibers. The interlaminar shear strength correlated well with the DMA results, indicating that DMA can measure the effectiveness of various surface treatments. The dynamic mechanical loss modulus increased with increasing fiber volume fraction or total surface area.

Download or read book Characterization of Interfacial Bond Strength by Dynamic Mechanical Analysis written by Roberto Jose Cano and published by . This book was released on 1990 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i

Download or read book Composite Materials written by Eugene T. Camponeschi and published by ASTM International. This book was released on 1993 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration and Damping Behavior of Biocomposites written by Senthil Muthu Kumar Thiagamani and published by CRC Press. This book was released on 2022-04-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced polymer composites exhibit better damping characteristics than conventional metals due to the viscoelastic nature of the polymers. There has been a growing interest among research communities and industries in the use of natural fibers as reinforcements in structural and semi-structural applications, given their environmental advantages. Knowledge of the vibration and damping behavior of biocomposites is essential for engineers and scientists who work in the field of composite materials. Vibration and Damping Behavior of Biocomposites brings together the latest research developments in vibration and viscoelastic behavior of composites filled with different natural fibers. Features: Reviews the effect of various types of reinforcements on free vibration behavior Emphasizes aging effects, influence of compatibilizers, and hybrid fiber reinforcement Explores the influence of resin type on viscoelastic properties Covers the use of computational modeling to analyze dynamic behavior and viscoelastic properties Discusses viscoelastic damping characterization through dynamic mechanical analysis. This compilation will greatly benefit academics, researchers, advanced students, and practicing engineers in materials and mechanical engineering and related fields who work with biocomposites. Editors Dr. Senthil Muthu Kumar Thiagamani, Kalasalinagam Academy of Research and Education (KARE), India Dr. Md Enamul Hoque, Military Institute of Science and Technology (MIST), Bangladesh Dr. Senthilkumar Krishnasamy, King Mongkut’s University of Technology North Bangkok KMUTNB, Thailand Dr. Chandrasekar Muthukumar, Hindustan Institute of Technology & Science (HITS), India Dr. Suchart Siengchin, King Mongkut’s University of Technology North Bangkok KMUTNB, Thailand

Download or read book Proceedings of the ASME Materials Division written by American Society of Mechanical Engineers. Materials Division and published by . This book was released on 1995 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-04 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites written by Senthilkumar Krishnasamy and published by Springer Nature. This book was released on 2024-01-17 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview of the importance of fibre-matrix interfacial bonding characteristics in natural fibre-based composites to obtain optimal material properties for a specific application. Composites materials are prepared by combining fibres and polymers to achieve superior materials properties than those of the individual components. Composite materials are used to produce lightweight components with increased stiffness and strength; their properties can also be tailored for any specific applications. The glass fibre reinforced composites dominate 95% of the thermoplastic and thermoset-based composites. However, the natural fibre reinforced composites can give competition to the glass fibres due to their advantages such as biodegradability, low density, low cost, and good mechanical properties. This book looks into biocomposites and its important aspect of optimization of materials’ performance by fine-tuning the fibre-matrix bonding characteristics. The chapters in the book look at different plant fibres such as kenaf, pineapple leaf, jute, date palm, luffa, cotton, hemp, wood, bamboo, flax, and straw and the different approaches to enhance the fibre-matrix interfacial bonding through physical and/or chemical treatment methods. It demonstrates that the nature of fibre-matrix bonding has a significant effect on the properties such as tensile, flexural, impact, inter-laminar shear strength, moisture absorption, thickness swelling, thermal, chemical, damping, creep, and fatigue. Its content appeals to academics, students, researcher, and scientist who are working in the field to produce biodegradable and recyclable materials in the composite industry.

Download or read book Composites Engineering Handbook written by P.K. Mallick and published by CRC Press. This book was released on 1997-03-19 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers information on the fundamental principles, processes, methods and procedures related to fibre-reinforced composites. The book presents a comparative view, and provides design properties of polymeric, metal, ceramic and cement matrix composites. It also gives current test methods, joining techniques and design methodologies.

Download or read book Dynamic Characterization of Advanced Materials written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1993 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Contact Angle Wettability and Adhesion Volume 4 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth volume in the series "Advances in Contact Angle, Wettability and Adhesion" initiated to consolidate information and provide commentary on certain recent research aspects dealing with this important topic. Its predecessor Volumes 1, 2 and 3 were published in 2013, 2015 and 2018 respectively. This new book comprising 14 research and review articles is divided into four parts: Part 1: Contact Angle and Wettability Aspects; Part 2: Surface Free Energy and Surface Tension Determination; Part 3: Applied Aspects. The topics covered include: Contact Angle Determination of Talc Powders from Heat of Immersion Surface Wetting at Macro and Nanoscale Wettability of Wood Surfaces with Waterborne Acrylic Lacquer Stains Modulated by DBD Plasma Treatment in Air at Atmospheric Pressure Wettability of Ultrafiltration Membranes Determination of the Surface Free Energy of Solid Surfaces: Can the Best Model be Found Surface Free Energy Characterization of Talc Powders Determination of the Surface Free Energy of Skin and the Factors Affecting it by the Contact Angle Method Determination of Surface Tension Components of Aqueous Solutions using Fomblin HC/25 R Perfluoropolyether Liquid Film as a Solid Substrate Enhancing the Wettability of Polybenzimidazole (PBI) to Improve Fuel Cell Performance Evaluation of Sebum Resistance for Long-Wear Face Make-Up Products Using Contact Angle Measurements Contact Angle Hysteresis of Pressure-Sensitive Adhesives due to Adhesion Tension Relaxation The Potential of Surface Nano-Engineering and Superhydrophobic Surfaces in Drag Reduction Laser Surface Engineering of Polymeric Materials for Enhanced Mesenchymal Stem Cell Adhesion and Growth Sisal-Green Resin Interfaces in Green Composites.

Download or read book Advanced Surface Treatments and Adhesive Bonding Testing Schemes of Ceramic Assemblies written by and published by . This book was released on 2006 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation of bond strength between dissimilar materials such as those in ceramic-metallic systems has to date been qualitative, offering no quantitative comparative results. This was due primarily to the difficulties inherent in handling and machining brittle materials such as ceramics. In this study a testing scheme was developed to circumvent the mechanical property inconsistencies of a metallic-ceramic system and allow quantitative evaluation of bond strength in a titanium/alumina composite system. Using a carefully designed half-wedge configuration, results are compared to a standard full-wedge test and show comparable bond strength and strain energy release rate values. Additionally, the effects of surface treatments on the ceramic-metallic bond strength are also evaluated with the half-wedge configuration as well as the effects of surface treatment on the mechanical integrity of the alumina ceramic.

Download or read book Adhesion Aspects in Dentistry written by Jukka P. Matinlinna and published by BRILL. This book was released on 2009-09-30 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern adhesive dentistry has numerous applications in cariology, as well as in aesthetic and pediatric dentistry, prosthodontics, implantology, and orthodontics-in essence, in comprehensive dental care. This unique book addresses various ramifications of adhesion and adhesives in the broad domain of dentistry. The topics covered include testing aspects of dental materials, dentin bonding, restorations, and adhesion promotion. This book reflects the cumulative wisdom of many world-renowned researchers and provides a useful reference to anyone involved in the various aspects of dentistry.

Download or read book Polymer Interface and Adhesion written by Wu and published by CRC Press. This book was released on 1982-03-31 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly mer Interface and Adhesion provides the critical basis for further advancement in thisfield. Combining the principles of interfacial science, rheology, stress analysis, and fracturemechanics, the book teaches a new approach to the analysis of long standing problemssuch as: how is the interface formed; what are its physical and mechanical properties;and how does the interface modify the stress field and fracture strength of the material.The book offers many outstanding features, including extensive listings of pertinent references, exhaustive tabulations of the interfacial properties of polymers, critical reviews ofthe many conflicting theories, and complete discussions of coupling agents, adhesion promotion, and surface modifications. Emphasis is placed on physical concepts and mechanisms, using clear, understandable mathematics.Polymer Interface and Adhesion promotes a more thorough understanding of the physical, mechanical, and adhesive properties of multiphase, polymer systems. Polymer scientistsand engineers, surface chemists, materials scientists, rheologists, as well as chemical andmechanical engineers interested in the research, development or industrial applications ofpolymers, plastics, fibers, coatings, adhesives, and composites need this important newsource b

Download or read book Surface Treatment of Materials for Adhesive Bonding written by Sina Ebnesajjad and published by William Andrew. This book was released on 2013-10-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at engineers and materials scientists in a wide range of sectors, this book is a unique source of surface preparation principles and techniques for plastics, thermosets, elastomers, ceramics and metals bonding. With emphasis on the practical, it draws together the technical principles of surface science and surface treatments technologies to enable practitioners to improve existing surface preparation processes to improve adhesion and, as a result, enhance product life. This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be an exhaustive overview, including more detailed explanation where necessary, in a continuous and logical progression. The book provides a necessary grounding in the science and practice of adhesion, without which adequate surface preparation is impossible. Surface characterization techniques are included, as is an up-to-date assessment of existing surface treatment technologies such as Atmospheric Plasma, Degreasing, Grit blasting, laser ablation and more. Fundamental material considerations are prioritised over specific applications, making this book relevant to all industries using adhesives, such as medical, automotive, aerospace, packaging and electronics. This second edition represents a full and detailed update, with all major developments in the field included and three chapters added to cover ceramic surface treatment, plasma treatment of non-metallic materials, and the effect of additives on surface properties of plastics. - A vital resource for improving existing surface treatment processes to increase product life by creating stronger, more durable adhesive bonds - Relevant across a variety of industries, including medical, automotive and packaging - Provides essential grounding in the science of surface adhesion, and details how this links with the practice of surface treatment

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.